Andrew Tridgell
fb0e48a25d
AP_TECS: adapt for new airspeed variable names
2013-07-18 14:53:23 +10:00
Andrew Tridgell
42d107b0d9
AP_SpdHgtControl: rename flybywire_airspeed to airspeed
...
this variable applies to any automatic throttle mode, not just FBW
modes.
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-07-18 14:53:20 +10:00
Andrew Tridgell
5901b8b22a
APM_Control: allow for a wider range of P values for roll/pitch
...
values above 1.0 are sometimes needed
2013-07-18 09:05:17 +10:00
Randy Mackay
336357fbaf
Copter: ensure _spin_when_armed is not higher than _min_throttle
2013-07-16 15:25:57 +09:00
Randy Mackay
62f3eed4e0
Copter: fix to SPIN_ARMED parameter desciption
2013-07-16 12:59:38 +09:00
Randy Mackay
b709b90a59
Copter: implement safety spin for Tricopters
2013-07-16 12:48:01 +09:00
Randy Mackay
6477c746cd
Copter: renamed MOT_UNSAFE_THR to MOT_SPIN_ARMED
...
Removed special purpose spin_unsafe function
renamed _throttle_unsafe to _spin_when_armed and changed to an AP_Int8
2013-07-16 12:47:59 +09:00
Jonathan Challinger
2725f219cb
Copter: Warn user with motors while copter is arming
2013-07-16 12:47:51 +09:00
Jonathan Challinger
ae2b1e3b7e
AP_Motors: Added MOT_UNSAFE_THR parameter - Throttle setting used to signal that the copter is armed or otherwise unsafe to approach
2013-07-16 12:47:49 +09:00
Andrew Tridgell
2ee43a694c
APM_Control: fixed YAW2SRV_IMAX handling
...
thanks to Steven G for noticing this!
2013-07-16 09:44:23 +10:00
Andrew Tridgell
032cc513ca
DataFlash: fixed example build
2013-07-15 14:10:58 +10:00
Andrew Tridgell
206ed04e76
AP_Mount: fixed example build
2013-07-15 14:10:50 +10:00
Andrew Tridgell
47450a9b40
AP_InertialNav: fixed example build
2013-07-15 14:10:40 +10:00
Andrew Tridgell
98d6331387
AP_Airspeed: fixed example build
2013-07-15 14:10:27 +10:00
Andrew Tridgell
1bd6849d00
AP_AHRS: fixed example build
2013-07-15 14:10:17 +10:00
Andrew Tridgell
82152c058e
AC_WPNav: disabled broken example build
...
this test doesn't actually do anything yet
2013-07-15 14:09:48 +10:00
Andrew Tridgell
04835b095f
AC_Fence: fixed examples build
2013-07-15 14:09:18 +10:00
Andrew Tridgell
c7141c4851
AP_GPS: fixed examples build
2013-07-15 14:09:07 +10:00
Andrew Tridgell
0f72eae216
AP_Camera: removed 3 camera trigger types that do not work
...
the trigger by wp distance, trigger with throttle off and trigger a
transistor all don't work, and are not structured correctly, plus are
dangerous.
The existing relay support can (correctly!) handle the resistor case
without hard-wiring a pin. The "turn off throttle to trigger" idea is
badly broken, it would crash a copter if it worked. We can make it
work properly on planes if there is demand. As it was it didn't work
anyway.
The triggger by wp distance method was broken, and had no way to
initiate a trigger anyway
2013-07-15 09:55:38 +10:00
Randy Mackay
bd6a60f28b
AP_Math: add M_PI_2 definition
...
Required when building under arduino
2013-07-14 15:57:26 +09:00
Randy Mackay
8545071a21
GCS_MAVLink: include AP_Math.h
...
Required because mavlink_conversions's mavlink_dcm_to_euler function
uses atan2
2013-07-14 15:56:58 +09:00
Randy Mackay
9b40ba98d7
GCS_MAVLink: regenerated messages
2013-07-14 15:52:55 +09:00
Randy Mackay
6bcbcc0382
GCS_MAVLink: add DO_SET_ROI to common.xml
2013-07-14 15:49:17 +09:00
Andrew Tridgell
d9f13b6b8c
GCS_MAVLink: merge in changes from upstream mavlink repo
2013-07-14 16:02:29 +10:00
Andrew Tridgell
b1202ccbff
GCS_MAVLink: merge in latest upstream XML changes
2013-07-14 15:41:25 +10:00
Andrew Tridgell
9d66adae13
AP_Airspeed: added get_airspeed_ratio() and set_airspeed_ratio()
...
This is to help Paul develop an automatic tuning system for airspeed
ratio
2013-07-13 21:53:38 +10:00
Andrew Tridgell
cc778a68ae
APM_Control: changed attitude controllers to take angular error not angle
...
this makes it easier for ACRO mode
2013-07-13 21:45:58 +10:00
Andrew Tridgell
b721bcc129
AP_AHRS: removed get_roll_rate_earth() and get_pitch_rate_earth()
...
these are not used any more
2013-07-13 21:45:58 +10:00
Andrew Tridgell
21859f9364
RC_Channel: fixed dead_zone for range channels
...
The dead_zone was being used inconsistently, used in PWM space in one
place, and in control output space in another.
The fix required us to move the index number of the RC channel eeprom
value for RCn_DZ, as users will have a throttle deadzone of 3 set in
their eeprom due to a bug that Randy just fixed that caused the value
to always be saved to eeprom. In plane we then need to fix the
deadzone for the throttle to be 30
this fixes issue #303
Thanks to Soren Kuula for spotting this!
2013-07-13 13:18:54 +10:00
Andrew Tridgell
086e8f80dc
AP_AHRS: fixed spin rate gain conversion from degrees to radians
...
fixes issue #433
Thanks Jurgen!
2013-07-13 12:36:25 +10:00
Randy Mackay
effc829790
INS: relax accel offset check to 3.5 m/s/s
...
One user, Dusty, has found that even with offsets of 3.1 m/s/s
successful alt hold and loiter are possible
2013-07-13 10:43:07 +09:00
Randy Mackay
110966c186
AP_TECS: compile error fix for size_of(log_tuning)
2013-07-12 11:45:02 +09:00
Randy Mackay
fb5ada38c0
RC: example sketch uses set_default_dead_zone
2013-07-12 11:44:58 +09:00
Randy Mackay
47437b9ddf
RC: set dead zone only if parameter has not been set by user
2013-07-12 11:44:16 +09:00
Randy Mackay
012d7b0c0a
OptFlow: initialisation fix
...
Thanks to DongFang (aka Soren) for finding the issue and the solution
2013-07-11 14:14:37 +09:00
Andrew Tridgell
131aa53e42
AP_Relay: update for new PX4 relay pin
2013-07-11 13:50:23 +10:00
Andrew Tridgell
83b13c3d88
HAL_PX4: fixed definition of relay and piezo pins
2013-07-11 13:50:23 +10:00
Andrew Tridgell
0916388ab5
HAL_PX4: retry opening UARTs up to 5 times
...
this seems to help a lot with the USB port on PX4
2013-07-11 13:50:23 +10:00
Marco Bauer
72d0721721
AP_Relay: setup pin for PX4 relay support
2013-07-11 13:50:22 +10:00
Marco Bauer
a3b216bce3
HAL_PX4: added GPIO driver
2013-07-11 13:50:22 +10:00
Randy Mackay
bf5a50f738
WPNav: stopping point projection uses wp_leash
2013-07-11 11:39:44 +09:00
Andrew Tridgell
f2316747f5
APM_Control: re-work to allow for rate based control
2013-07-11 09:10:41 +10:00
Randy Mackay
345924ddec
WPNav: replace LOITER_ACCEL_MAX with parameter
...
Also removed unused _lean_angle_max variable
2013-07-10 20:00:32 +09:00
Randy Mackay
204f613467
WPNav: bug fix to reported distance to target
...
This value is for reporting purposes only
2013-07-10 18:21:08 +09:00
Randy Mackay
518eba0729
WPNav: bug fix to loiter accel calculation
...
Contribution from Leonard Hall
2013-07-10 17:52:12 +09:00
Randy Mackay
c4f17b3235
WPNav: rounding error fix in loiter
...
Contributed by Leonard Hall
2013-07-10 16:24:37 +09:00
Randy Mackay
5d23d5aaa7
WPNav: reduce loiter speed used to correct pos error
...
Contributed by Leonard Hall
This should reduce the aggressiveness of the response when we experience
a GPS glitch
2013-07-10 15:52:18 +09:00
Randy Mackay
7860d06b91
AHRS: typo fix for ORIENTATION param description
2013-07-10 14:56:48 +09:00
Andrew Tridgell
0f72401d8d
AP_Baro: added GND_ALT_OFFSET parameter
...
used for automatic barometric adjustment by a ground station equipped
with a barometer
2013-07-10 14:38:57 +10:00
Andrew Tridgell
469736e6bc
DataFlash: changes for GPS field changes
2013-07-10 14:04:22 +10:00
