Andrew Tridgell
|
bb0eed5c14
|
SITL: prevent initialisation error
|
2014-02-15 05:48:17 +11:00 |
Andrew Tridgell
|
765bfbfe43
|
HAL_SITL: use SIM_RC_FAIL
|
2013-12-20 09:43:04 +11:00 |
John Boiles
|
d8cdb57efa
|
HAL_SITL: Attempting to avoid SIGPIPE on all platforms
|
2013-12-17 14:51:27 +11:00 |
Andrew Tridgell
|
b075f8735f
|
SITL: moved airspeed pin to pin 1
keep it separate from the sonar, allowing both to be used at the same time
|
2013-11-28 21:44:05 +11:00 |
Ben Nizette
|
70d37d2cf6
|
SITL: Wire in basic support for SITL downward-looking sonar sensors
|
2013-11-28 21:38:05 +11:00 |
Andrew Tridgell
|
86afc26609
|
HAL_SITL: decrease wind with altitude
this prevents JSBSim crash on the runway
|
2013-10-17 17:22:19 +11:00 |
Randy Mackay
|
db2975901d
|
AP_HAL_AVR_SITL: use SIM_BATT_VOLTAGE parameter
|
2013-10-03 11:16:36 +09:00 |
Andrew Tridgell
|
c7df0eaf2a
|
SITL: added battery voltage and current
assume 3DR brick
|
2013-10-03 11:16:14 +09:00 |
Andrew Tridgell
|
350af4d92f
|
HAL_AVR_SITL: updates for InertialSensor
|
2013-09-28 22:04:15 +10:00 |
Michael Oborne
|
54fc004956
|
SITL: fix sitl timer issues under cygwin
|
2013-09-21 22:06:38 +10:00 |
Andrew Tridgell
|
e85d275fe5
|
SITL: added SIM_SERVO_RATE parameter
this allows a slew rate for servos to be specified in degrees/second
|
2013-09-16 09:16:52 +10:00 |
Andrew Tridgell
|
33cbe6151a
|
SITL: support multiple instances of SITL running at once
|
2013-08-14 16:35:24 +10:00 |
Randy Mackay
|
b914f9ba06
|
SITL: use SIM_ENGINE_MUL to simulate motor failure
|
2013-05-19 14:29:08 +09:00 |
Andrew Tridgell
|
53ebcfeba5
|
SITL: fixed compass vector to be based on yaw not GPS heading
Many thanks to Randy for noticing this, and apologies for the wasted time!
|
2013-05-04 14:28:08 +10:00 |
Andrew Tridgell
|
811c2ccc11
|
libraries: fixes for AP_Baro_HIL
|
2013-05-02 15:09:05 +10:00 |
Andrew Tridgell
|
0ffc7dab6b
|
SITL: added GPS speed down to SITL state
|
2013-03-28 10:29:12 +11:00 |
Andrew Tridgell
|
16270ccc47
|
HAL_AVR_SITL: fixed windows build
|
2013-03-03 22:22:19 +11:00 |
Andrew Tridgell
|
37be83994f
|
SITL: allow motor multiplier to work on quad simulation
|
2013-01-22 21:22:01 +11:00 |
Pat Hickey
|
bc3b6fcb9f
|
AP_HAL_AVR_SITL: remove begin/end atomic, adjust timer procs
|
2013-01-03 17:33:14 -08:00 |
Andrew Tridgell
|
091c14a33e
|
SITL: disabled buffering on stdout
this fixes the ArduPlane log dump
|
2012-12-24 08:00:57 +11:00 |
Andrew Tridgell
|
7ecf8981b9
|
SITL: added dummy SPI and make RCInput 50Hz
|
2012-12-20 14:52:34 +11:00 |
Andrew Tridgell
|
abbe37be37
|
SITL: added emulated airspeed sensor on a pin
|
2012-12-20 14:52:33 +11:00 |
Andrew Tridgell
|
472b45bc2a
|
SITL: fixed use of local printf() method in UART driver
|
2012-12-20 14:52:33 +11:00 |
Andrew Tridgell
|
7be507948f
|
SITL: added SITL_State::loop_hook()
this prevents us using so much CPU time, and ensures stdout is flushed
|
2012-12-20 14:52:33 +11:00 |
Andrew Tridgell
|
0c9d37e2ee
|
SITL: added RCInput and RCOutput
|
2012-12-20 14:52:33 +11:00 |
Andrew Tridgell
|
98ead51801
|
SITL: fill in a lot more of the AP_HAL SITL backend
|
2012-12-20 14:52:30 +11:00 |