Commit Graph

54202 Commits

Author SHA1 Message Date
Andrew Tridgell f7e4b5c72d AP_Vehicle: use AP_CheckFirmware 2022-08-15 09:18:34 +10:00
Andrew Tridgell aeb6d2ab89 AP_CheckFirmware: added library for checking firmware ID and CRC 2022-08-15 09:18:34 +10:00
Andrew Tridgell 68f05c7386 AP_OpenDroneID: added AP_OpenDroneID_config.h 2022-08-15 09:18:34 +10:00
Andrew Tridgell 673fed92c7 AP_OpenDroneID: fixed checking of payload space
this fixes DroneCAN operation without a mavlink channel set
2022-08-15 08:54:48 +10:00
Peter Barker d092e767ea AP_Common: correct gtests
AFAIK it's invalid to new a zero-length array.
2022-08-15 07:39:39 +10:00
Andrew Tridgell 2a95ced697 GCS_MAVLINK: pass OPEN_DRONE_ID_SYSTEM_UPDATE to library 2022-08-14 22:02:43 +10:00
Andrew Tridgell b52c280704 AP_OpenDroneID: check available tx space and fixed message rates
ensure we don't lose messages due to lack of serial TX space, and
fixed update rate of LOCATION and SYSTEM_UPDATE msgs
2022-08-14 22:02:43 +10:00
Andrew Tridgell 0fc6c813a1 AP_OpenDroneID: implement OPEN_DRONE_ID_SYSTEM_UPDATE
this is a bandwidth efficient way to update the OPEN_DRONE_ID_SYSTEM message data when there is limited uplink bandwidth. Testing on real vehicles shows that with RFD900x radios at an air data rate of 125kbit/s with OPEN_DRONE_ID messages with 1Hz update (as required by FAA RemoteID standard) that there is significant impact on the ability of the GCS to give commands to the flight controller. For example, I got a high degree of packet loss in downloading parameter pre-flight, and many/most in-flight commands failed from the GCS.
By using this message we can use the minimum required bandwidth for updating operator location while remaining FAA RemoteID standard compliant
2022-08-14 22:02:43 +10:00
Andrew Tridgell e5db2ea111 mavlink: submodule update 2022-08-14 22:02:43 +10:00
Peter Barker bbff00dc0d autotest: be generous with mission upload timeouts
A *lot* of simulated time can pass while the Python gets its act together.  Allow a very large amount of time to pass while uploading missions.
2022-08-14 08:21:07 +10:00
Peter Barker eed9c2e38b autotest: validate kwargs to wait_and_maintain_range 2022-08-14 07:52:42 +10:00
Peter Barker add5243634 autotest: Rover: ensure we actually stop at rally point 2022-08-14 07:52:42 +10:00
Peter Barker a237a42390 build_ci.sh: change back to original directory after running profile
.profile changes directory on Vagrant VMs.
2022-08-14 07:50:27 +10:00
Peter Barker 26d3ffc27d GCS_MAVLink: correct INS_generic example
segfaults due to lack of singletoin objects in examples
2022-08-13 20:53:29 +10:00
Peter Barker a4773413e4 AP_InertialSensor: correct INS_generic example
segfaults due to lack of singletoin objects in examples
2022-08-13 20:53:29 +10:00
Peter Barker 44229c87f0 Tools: size_compare_branches: allow compilation with --extra-hwdef 2022-08-13 09:31:13 +10:00
Andy Piper 3521090dd5 AP_HAL_ChibiOS: correct HAL_SPI_CHECK_CLOCK_FREQ build error 2022-08-12 20:53:36 +10:00
Andy Piper a6312ac893 AP_InertialSensor: correctly detect bad frames on regular ICM42xxx 2022-08-12 20:53:36 +10:00
Andy Piper 2b7bb84838 AP_HAL_ChibiOS: increase ICM42xxx SPI clock to 16Mhz on MatekH743 2022-08-12 20:53:36 +10:00
Andy Piper 221ab9752e AP_InertialSensor: synchronise fifo reads on the ICM42xxx 2022-08-12 20:53:36 +10:00
Peter Barker 5eb2f6780e autotest: tidy angle test 2022-08-12 19:55:32 +10:00
Randy Mackay 3097eb763e Rover: 4.2.3-rc1 release notes 2022-08-12 15:56:33 +09:00
Randy Mackay c7dc1fc441 Copter: 4.2.3-rc1 release notes 2022-08-12 15:56:22 +09:00
Peter Barker 8fd5df33d5 autotest: add test for stick-mixing in auto mode 2022-08-11 20:03:12 -04:00
Peter Barker aec179ca40 Rover: fix stick mixing in auto mode 2022-08-11 20:03:12 -04:00
Peter Barker ffc0d8b229 autotest: add test that we need RC input by default to arm for Copter 2022-08-11 20:01:45 -04:00
Peter Barker cb9f376638 Copter: make rc-in-failsafe checks a prearm check rather than an at-arm check 2022-08-11 20:01:45 -04:00
Peter Barker 1e3f37908c Copter: factor out an rc_throttle_failsafe_checks method
NFC, preparing to call this from elsewhere
2022-08-11 20:01:45 -04:00
Peter Barker 46dacd3b61 autotest: add tests for disallowing flying mid-air 2022-08-12 09:44:08 +10:00
Peter Barker 48fd37cd25 AP_DroneID: add missing element to constructor 2022-08-11 21:06:04 +01:00
Peter Barker 445ee86734 autotest: tidy resetting of parameters after battery failsafe test 2022-08-11 13:32:24 +10:00
Peter Barker 67a87800f9 AP_OpenDroneID: correct compilation under gcc 7.5.0 2022-08-11 13:31:59 +10:00
Peter Barker df2e354828 build_binaries.py: print not-found-on-boardlist message
Makes it clearer in the output that we're skipping a board because it isn't in the configure list.  Currently it just does the submodule updaet then goes onto the next build, without telling you why it's not doing anything more
2022-08-10 23:28:14 +10:00
Peter Barker f345c16fda AP_Math: add dignostic message for SCurve internal error 2022-08-10 22:18:42 +10:00
Peter Barker e29374fa04 Tools: extract_features.py: allow for regular expressions for features
Also switch to keying off the define in build_options.py rather than the label as the label is not unique and we'd have to munge them badly (and enforce shape) where we can just use the ArduPilot defines which are all pretty well-formed.
2022-08-10 18:05:54 +10:00
Peter Barker 5b3a6daa7b AP_Mission: rename contains_terrain_relative->contains_terrain_alt_items
can we rename "constains_terrain_relative" to "contains_terrain_alt"? No big deal of course but "terrain_alt" is what we use in Copter so it's more likely to show up in searches.
2022-08-10 18:04:22 +10:00
Peter Barker 6709c6d72d AP_Arming: rename contains_terrain_relative->contains_terrain_alt_items
can we rename "constains_terrain_relative" to "contains_terrain_alt"? No big deal of course but "terrain_alt" is what we use in Copter so it's more likely to show up in searches.
2022-08-10 18:04:22 +10:00
Peter Barker 1c7e2f5094 AP_HAL_SITL: correct bind-value SIM_RC_FAIL handling
If SITL is not receiving any sitl rc input (so _sitl_rc_in.recv(...) is allways returns -1 then the bind-values code would never be crossed so the RC input values would remain at their initialisation values rather than honouring the SIM_RC_FAIL setting which says they should go to bind values (notably throttle-to-950)
2022-08-10 17:14:21 +10:00
bugobliterator 760436c282 bootloaders: update bootloaders for CubeOrange and related hardware 2022-08-10 17:06:29 +10:00
bugobliterator fce49232b2 hwdef: disable power reset on peripheral line 2022-08-10 17:06:29 +10:00
Peter Barker 0632b9a0c4 Tools: powr_status.py: remove MAV_POWER_STATUS_ from bit descriptions 2022-08-10 10:05:48 +10:00
Andrew Tridgell 204a8cdc55 Plane: release notes for 4.2.3beta2 2022-08-10 06:09:23 +10:00
Andrew Tridgell 33f6c42bd4 Tools: rebuilt bootloaders
rebuild bootloaders impacted by
https://github.com/ArduPilot/ardupilot/pull/21308
2022-08-10 05:04:22 +10:00
Andrew Tridgell cc2589777f AP_Periph: pass correct WGS84 height on GPS peripherals 2022-08-10 05:04:18 +10:00
Andrew Tridgell cdf8cad801 AP_GPS: fixed undulation for DroneCAN GPS 2022-08-10 05:04:18 +10:00
Andrew Tridgell 74a66ede95 AP_OpenDroneID: prevent sending of lost transmitter msg too fast 2022-08-10 05:04:18 +10:00
Andrew Tridgell 0e037c99f3 hwdef: support moving baseline yaw with Holybro G4 CAN GPS 2022-08-09 21:05:08 +10:00
Andrew Tridgell 6c3de20569 hwdef: support moving baseline GPS yaw on MatekL431-Periph 2022-08-09 21:04:37 +10:00
Shiv Tyagi 998119d011 SITL: fix var naming for precland device center 2022-08-09 18:00:11 +10:00
Andy Piper 9a450a05bb Copter: add fast harmonic notch logging 2022-08-09 03:45:08 -04:00