Commit Graph

46 Commits

Author SHA1 Message Date
Andrew Tridgell 22bfec4d2a Copter: fixed motor runup check for heli
for all auto-throttle modes we should not allow a mode change to the
mode if the motor runup is not complete.

This moves the code to the set_mode() so it applies to all modes

fixes issue #6956
2017-09-21 08:52:50 +10:00
squilter 4b57a4a231 Copter: rename SafeRTL to SmartRTL 2017-09-09 14:05:41 +09:00
Randy Mackay 8df042f00c Copter: complete addition of SafeRTL flight mode 2017-09-09 14:05:41 +09:00
squilter ba0e08552f Copter: add SafeRTL flight mode 2017-09-09 14:05:41 +09:00
Peter Barker c6b9c84d1f Copter: remove CLI 2017-08-14 10:23:50 +09:00
Peter Barker f60389d4aa Copter: use send_text method on the GCS singleton 2017-07-09 17:17:29 -04:00
murata 8f926bd177 Copter: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
Randy Mackay 26919b4ab6 Copter: send flight mode string to Notify 2017-01-23 15:07:20 -08:00
Randy Mackay af514eb101 Copter: remove some comments 2017-01-23 15:07:20 -08:00
Dmitry Prokhorov 3e993f955e ArduCopter: Support for OLED display by Alexey Kozin 2017-01-23 15:07:20 -08:00
Andrew Tridgell 0f6d0c5ba9 Copter: combined tri, single, coax and multicopter into a single build
this allows copter to be just 2 builds, one for heli, and one for
everything else
2017-01-12 17:39:37 +11:00
Luis Vale Gonçalves b9e83755f3 Copter: Notify GCS that Flight mode change failed
Copter: Notify GCS that Flight mode change has failed
2017-01-05 02:16:32 +00:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Leonard Hall fec24437f2 Copter: load accel throttle I term from attitude controller input
Previously we loaded up the I term from the pilot's input but a more reliable method is to get what was passed into the attitude controller.  In particular the addition of the acro-thr-mid parameter means the pilot's input must be interpreted differently for different flight modes.
2016-10-15 11:27:53 +09:00
Randy Mackay a124001b8b Copter: get_pilot_desired_throttle gets thr_mid argument default 2016-10-15 11:27:53 +09:00
Leonard Hall 5c47f3f9e5 Copter: add acro throttle and yaw expo and smoother manual pilot throttle 2016-10-15 11:27:53 +09:00
Randy Mackay 3b6e56d1a0 Copter: minor formatting fixes
No functional change
2016-10-10 12:11:14 +09:00
murata 61fa73f25d Copter: remove return after the Switch statement 2016-10-10 12:07:24 +09:00
Andrew Tridgell a14ff8ac77 Copter: fixes for Frsky_Telem API changes 2016-08-25 10:16:20 +10:00
Randy Mackay 807e930251 Copter: throw uses motor spooling instead of interlock 2016-08-02 20:25:52 +09:00
Randy Mackay 1161417d7f Copter: add GUIDED_NOGPS flight mode
This mode is a cut down version of Guided mode that only accepts attitude commands.
This mode does not require a GPS lock
2016-08-02 18:25:59 +09:00
mirkix e3934fac80 ArduCopter: Delete (wrong) filename out of header 2016-07-25 17:13:41 -03:00
Randy Mackay d50987f976 Copter: avoidance_adsb implements copter avoidance using ADSB 2016-07-25 20:24:37 +09:00
Tom Pittenger d136737c87 Copter: add ADSB-out support for copter 2016-07-20 22:46:54 -07:00
Ricardo de Almeida Gonzaga ce241dd97a ArduCopter: Fix typos 2016-05-13 19:20:07 -03:00
skyscraper 6f200fa923 ArduCopter: Fix up after refactoring RC_Channel class
Further to refactor of RC_Channel class which included
adding get_xx set_xx methods, change reads and writes to the public members
to calls to  get and set functionsss

old public member(int16_t)   get function -> int16_t     set function (int16_t)
(expression where c is an object of type RC_Channel)
c.radio_in                     c.get_radio_in()           c.set_radio_in(v)
c.control_in                   c.get_control_in()         c.set_control_in(v)
c.servo_out                    c.get_servo_out()          c.set_servo_out(v)
c.pwm_out                      c.get_pwm_out()            // use existing
c.radio_out                    c.get_radio_out()          c.set_radio_out(v)
c.radio_max                    c.get_radio_max()          c.set_radio_max(v)
c.radio_min                    c.get_radio_min()          c.set_radio_min(v)
c.radio_trim                   c.get_radio_trim()         c.set_radio_trim(v);

c.min_max_configured() // return true if min and max are configured

Because data members of RC_Channels are now private and so cannot be written directly
 some overloads are provided in the Plane classes to provide the old functionality

new overload Plane::stick_mix_channel(RC_Channel *channel)
which forwards to the previously existing
void stick_mix_channel(RC_Channel *channel, int16_t &servo_out);

new overload Plane::channel_output_mixer(Rc_Channel* , RC_Channel*)const
which forwards to
(uint8_t mixing_type, int16_t & chan1, int16_t & chan2)const;

Rename functions

 RC_Channel_aux::set_radio_trim(Aux_servo_function_t function)
    to RC_Channel_aux::set_trim_to_radio_in_for(Aux_servo_function_t function)

 RC_Channel_aux::set_servo_out(Aux_servo_function_t function, int16_t value)
    to RC_Channel_aux::set_servo_out_for(Aux_servo_function_t function, int16_t value)

 Rationale:

        RC_Channel is a complicated class, which combines
        several functionalities dealing with stick inputs
        in pwm and logical units, logical and actual actuator
        outputs, unit conversion etc, etc
        The intent of this PR is to clarify existing use of
        the class. At the basic level it should now be possible
        to grep all places where private variable is set by
        searching for the set_xx function.

        (The wider purpose is to provide a more generic and
        logically simpler method of output mixing. This is a small step)
2016-05-10 16:21:16 +10:00
Randy Mackay 55ffee25b1 Copter: remove unnecessary control_mode_t casts
Thanks @OXINARF
2016-04-14 12:24:04 +09:00
Jonathan Challinger 8f41215569 Copter: fix warning 2016-04-14 12:24:04 +09:00
Jonathan Challinger 2a36c32cf3 Copter: add prev_control_mode and prev_control_reason 2016-04-14 12:24:04 +09:00
Jonathan Challinger 8ded496f8b Copter: log mode change reason 2016-04-14 12:24:04 +09:00
Jonathan Challinger 1356deab8b Copter: add control_mode_reason 2016-04-14 12:24:04 +09:00
Jonathan Challinger a0ce8af633 Copter: use enum type for control_mode 2016-04-14 12:24:04 +09:00
Randy Mackay d2a42a7a0e Copter: remove heli_radio_passthrough
Replaced with set_radio_passthrough which can be used for all frames
2016-04-01 11:59:30 +09:00
Randy Mackay 24cfbeebd0 Copter: add throw_exit 2016-03-03 12:18:25 +09:00
Paul Riseborough a7b69366a1 Copter: Add flight mode for throw launch
The is commit adds a new flight mode called 'Throw' to Copter that enables the copter to be thrown into the air to start motors. This mode can only be netered when the copters EKF has a valid position estimate and goes through the following states

Throw_Disarmed - The copter is disarmed and motors are off.
Throw_Detecting - The copter is armed, but motors will not spin unless THROW_MOT_START has been set to 1. The copter is waiting to detect the throw. A throw with an upwards velocity of at least 50cm/s is required to trigger the detector.
Throw_Uprighting - The throw has been detected and the copter is being uprighted with 50% throttle to maximise control authority. This state transitions when the copter is within 30 degrees of level.
Throw_HgtStabilise - The copter is kept level and height is stabilised about the target height which is 3m above the height at which the throw release was detected. This state transitions when the height is no more than 0.5m below the demanded height.
Throw_PosHold - The horizontal motion is arrested and the copter is kept at a constant position and height.
2016-03-03 12:18:13 +09:00
Randy Mackay 9e0cd7a5cf Copter: allow arming in Drift and Sport modes 2016-01-14 10:13:45 +09:00
Jonathan Challinger 0e85f55cfc Copter: remove OF_LOITER entirely 2015-12-31 14:27:22 +09:00
Robert Lefebvre 5cc4f41d85 Copter: Helicopter: to use new Stab_Col and Acro_Col functions. 2015-11-12 19:37:23 +09:00
Lucas De Marchi 20c6ffc5e3 Replace use of UARTDriver::printf_P() with UARTDriver::printf()
This also starts to show warnings on places that were already using
wrong printf format strings.
2015-10-30 14:35:25 +09:00
Lucas De Marchi a964ac38ec Replace use of print_P() with print() 2015-10-30 14:35:21 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
2015-10-30 14:35:04 +09:00
Andrew Tridgell 49ee4b7965 Copter: tell motors library when to use acro gyro gain 2015-09-25 12:30:34 +10:00
Andrew Tridgell ebddc05ead Copter: enable tail pass thru in acro for EXTGYRO tails
this allows acro mode to function as full passthru
2015-06-26 12:45:40 +09:00
Randy Mackay ce1031a5bd Copter: remove AP_AHRS_NAVEKF_AVAILABLE checks
Copter requires an EKF
2015-06-10 12:18:38 +09:00
Andrew Tridgell 278883c521 Copter: finished conversion to .cpp files
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2015-05-30 15:21:19 +09:00
Andrew Tridgell 356ece3402 Copter: rename .pde files to .cpp files 2015-05-30 15:21:15 +09:00