Randy Mackay
15508c49ef
Copter: default LAND_REPOSITION to 1
2014-08-31 11:40:06 +09:00
Randy Mackay
68df421484
Copter: throttle deadzone parameter
...
Allows increasing or decreasing the deadband size in AltHold, Loiter,
PosHold flight modes
2014-08-31 10:19:03 +09:00
Randy Mackay
7802c85b5f
Copter: pre-arm check of internal vs ext compass
2014-08-26 22:44:20 +09:00
Randy Mackay
6fc5014a84
Copter: increase sonar timeout to 1sec
...
Contributed by Julien Dubois.
2014-08-14 19:37:00 +09:00
Randy Mackay
f3fd79597f
Copter: add ACRO_EXPO parameter
2014-08-14 11:47:37 +09:00
Randy Mackay
7b9fa1ea79
Copter: rate IMAX increase to 1000
2014-08-04 11:31:02 +09:00
Randy Mackay
4e2683421c
Copter: disable parachute and rally on APM1
2014-08-01 15:14:40 +09:00
Randy Mackay
b52f8351e8
Copter: rename EKFCHECK_COMPASS to EKFCHECK_THRESH
...
Renamed because this threshold is now used for both compass and velocity
variance.
Also minor reorganisation of ekfcheck but no functional change.
2014-07-31 22:58:43 +09:00
Matthias Badaire
147e91877e
Copter: Add SERIAL2_PROTOCOL for GCS and FRsky telemtry
...
this allows selection of protocol type on telem2. The default is
MAVLink, but can be selected as FrSky protocol
2014-07-29 17:08:19 -07:00
akdslr
dc67058771
ArduCopter: Removed CONFIG_SONAR_SOURCE, SONAR_SOURCE_ADC, and SONAR_SOURCE_ANALOG_PIN since no longer used
2014-07-24 14:41:55 +10:00
Randy Mackay
a4a4334b13
Copter: add EKFCHECK_COMPASS parameter
2014-07-22 23:13:22 +09:00
Craig Elder
07d43534c1
Copter: Change Radio Failsafe Timeout
...
Change Radio Failsafe Timeout from 2 seconds to 200ms
2014-07-16 19:41:43 -07:00
Craig Elder
e85c9f078d
Copter: Change Radio Failsafe Timeout
...
Change Radio Failsafe Timeout from 2 seconds to 200ms
2014-07-16 11:02:32 -07:00
Andrew Tridgell
49954a3a61
Copter: use sensors from board subtypes
2014-07-14 09:44:35 +10:00
Randy Mackay
65e5367619
Copter: rename hybrid to poshold
2014-07-11 14:09:01 +09:00
Jonathan Challinger
09a01a4668
Copter: Wait 4 seconds before beginning to land during failsafes
2014-07-06 20:25:04 +09:00
Jonathan Challinger
5b36e65cb9
Copter: Add parameter LAND_REPOSITION to enable/disable user input during auto-mode landings and descents
2014-07-06 19:20:25 +09:00
Randy Mackay
fdc0ec837b
Copter: add nav_guided suport to Auto mode
2014-07-06 17:00:31 +09:00
Randy Mackay
db000f2287
Copter: remove setting rate and thr D term filters
2014-05-29 17:40:24 +09:00
Robert Lefebvre
5eb206e6bb
Copter: Add 'handle' to allow #define updating of AC_PID filter rate for Throttle Accel.
2014-05-29 17:39:16 +09:00
Robert Lefebvre
df1de4260d
Copter: Set Rate PID D-term filter rates on initialization.
2014-05-29 17:39:12 +09:00
Randy Mackay
20719e23fd
Copter: enable PARACHUTE and RALLY for all but APM
2014-05-27 14:43:33 +09:00
Randy Mackay
ff1a58e078
Copter: increase LOITER_RATE_IMAX to 1000
...
This allows us to load up the I term with the vehicle's current
acceleration during mode transitions
pair programmed with Randy
2014-05-08 16:15:34 +09:00
Randy Mackay
d857427444
Copter: disable RALLY points by default
...
This saves 2k of flash which allows the code to fix on the APM1/2
2014-04-30 21:46:21 +09:00
Randy Mackay
a4c675c23e
Copter: add PILOT_ACCEL_Z parameter
...
Allows configurable z-axis acceleration when pilot is controlling
altitude
2014-04-30 21:46:13 +09:00
Randy Mackay
19f1e7fec4
Copter: disable Parachute by default
...
This saves 1k of flash and we are desperately low on the APM1/APM2.
Hopefully we can find savings somewhere and re-enable it by default.
2014-04-24 19:02:32 +09:00
Randy Mackay
287af8f66e
Copter: disable optical flow by default
...
We have run out of flash on the APM2, it was a choice between Hybrid
flight mode and OF_Loiter
2014-04-23 15:27:08 +09:00
Randy Mackay
55e7e1eb3e
Copter: allow HYBRID to be disabled to save flash
...
Hybrid flight mode costs 4.5k of flash which currently puts us over the
limit for APM1 and APM2 unless optical flow or other features are
disabled
2014-04-23 15:27:05 +09:00
Ju1ien
f8e8d4024d
Copter: Hybrid's max brake angle to 30deg
2014-04-23 14:59:53 +09:00
Randy Mackay
f467d7bc20
Copter: add Hybrid parameters
2014-04-23 14:59:25 +09:00
Randy Mackay
5fc071f5f9
Copter: restore SITL to run at 100hz
2014-04-21 21:46:22 +09:00
Randy Mackay
8ac14023b4
Copter: set main loop rate from CPU class
...
Previously this was determined by the board
2014-04-21 13:32:00 +09:00
Andrew Chapman
fa3732ac6d
Copter: integrate AP_Rally
2014-04-19 15:00:23 +09:00
Emile Castelnuovo
9e31f032c2
Copter: added VRBRAIN board #includes and #defines
2014-04-08 16:19:20 +10:00
Randy Mackay
ff32b27272
Copter: integrate parachute lib
2014-04-07 13:36:44 +09:00
Andrew Tridgell
640b64f5e4
Copter: convert to new GPS API
2014-04-01 06:38:24 +11:00
Jonathan Challinger
2601ac9959
Copter: Remove 80m altitude limit on RTL
2014-03-31 20:34:19 +09:00
Andrew Tridgell
3de574e5dc
Copter: disable GPS2 in HIL
2014-02-27 08:16:20 +11:00
Andrew Tridgell
37394b30ee
Copter: added support for 2nd GPS
2014-02-26 09:40:29 +11:00
Randy Mackay
00913ffe1b
Copter: throttle rate to simple P controller
...
Saves at least 15bytes of RAM
2014-02-16 13:35:40 +11:00
Randy Mackay
aab9b30bf6
Copter: replace APM_PI with AC_P
...
Saves about 90bytes of RAM
2014-02-15 06:09:08 +11:00
Randy Mackay
ea1158a9d5
Copter: remove unused config
2014-02-15 05:27:47 +11:00
Randy Mackay
aec67cd3df
Copter: integrate control_autotune
2014-02-15 05:27:44 +11:00
Randy Mackay
ef666c73ab
Copter: remove Position mode
2014-02-15 05:27:42 +11:00
Robert Lefebvre
c561d6bb9e
Small comment change.
2014-02-15 05:27:42 +11:00
Randy Mackay
2253cf9769
Copter: run main loop at 400hz for pixhawk
2014-02-15 05:27:33 +11:00
Andrew Tridgell
0a3476bbf1
Copter: change to new board_voltage() API
2014-02-14 21:50:59 +11:00
Randy Mackay
dee5fb212a
Copter: remove dup definition of FRAME_ORIENTATION
...
Ideally the frame orientation parameter should be moved to the motors
class
2014-01-21 21:44:17 +09:00
Randy Mackay
a9f1a2ee5e
Copter: disarm on land even if pilot throttle not zero
...
default behaviour remains as before, this is an compile time option only
2014-01-15 11:31:00 +09:00
Randy Mackay
a3527ade61
Copter: move EARTH_FRAME definition to defines.h
...
defines.h is for defining enumerations and other unchanging values while
config.h is for changeable values like parameter defaults, enabling or
disabling sensors.
2014-01-14 21:53:13 +09:00
