Commit Graph

87 Commits

Author SHA1 Message Date
bnsgeyer 28f4c68f2f AP_MotorsHeli: add spool logic support
Also moved heli init_target_on_arming flag in from vehicle code
2019-01-15 11:41:44 +09:00
bnsgeyer 833bc4e77d AP_Motors: Tradheli - fixes slew speed of swashplate during collective servo test 2018-09-24 19:55:11 +01:00
bnsgeyer 0f75866042 AP_Motors: Tradheli-corrected get_motor_mask method 2018-07-16 12:41:16 +10:00
bnsgeyer dec8c5de77 AP_Motors: convert heli code to use SRV_Channels
this converts the heli code to use the SRV_Channels output
functions. It does not change behaviour, but removes the last vehicle
type that did its own servo output calculations.  This change also
fixed servo initialization conflicts.

Note that this also allows helis to be setup with more than one
channel for a particular output (eg. two separate channels for tail
servo if they are wanted). This isn't likely to be used much, but does
make heli consistent with other vehicle types
2018-07-16 12:41:16 +10:00
Jacob Walser abcb845af5 AP_Motors: refactor output_test -> output_test_seq 2018-07-02 11:31:58 -04:00
ChristopherOlson 1709c258bf AP_Motors:TradHeli - fix metadata for H_COL_CTRL_DIR 2018-06-28 09:02:48 +09:00
bnsgeyer c8488e3333 AP_Motors: Tradheli - swashplate servo trim fix for heli single and dual frames 2018-04-24 10:30:26 +10:00
ChristopherOlson 9aa685a6d8 AP_Motors:TradHeli - single rotor only - add support for H3-140 swashplates.
Also changes the old definition to H3 for swashplates with fixed control radius and adjustable servo position.
2018-04-18 14:24:59 +09:00
ChristopherOlson f073c58f68 AP_Motors:TradHeli - add support for reverse collective swashplates 2018-04-18 14:24:59 +09:00
bnsgeyer 690e8fd3f4 AP_Motors: TradHeli - Changed RSC mode 3 to a spline fit throttle curve 2018-03-27 09:07:03 +11:00
ChristopherOlson 96793a3ae7 AP_Motors:TradHeli - DDVP Ramp/Runup
Change to ramp and runup DDVP tail rotor to prevent torque pitching the frame and provide runup in sync with main
rotor like a mechanically driven tail.

Fix some comments and remove indents found in whitespace in AP_MotorsHeli.cpp and AP_MotorsHeli.h
2018-03-14 09:18:07 +09:00
bnsgeyer 7a9e424977 AP_Motors: added comments to indicate parameter indices previously used by RSC_PWM_MIN, RSC_PWM_MAX, and RSC_PWM_REV 2018-01-23 14:12:27 +09:00
Andrew Tridgell 2c73b374f5 AP_Motors: protect against writes to NULL servo_aux
if user changes parameter while setting up it could crash
2018-01-21 21:12:13 +11:00
bnsgeyer ac2e933358 AP_Motors: Tradheli - Fixed Directdrive Variable Pitch Feature 2018-01-21 21:12:13 +11:00
bnsgeyer 37ea64513d AP_Motors: TradHeli - fixed servo test function 2017-11-01 14:01:48 +09:00
Andrew Tridgell 03e1f6967f AP_Motors: removed enable() API
all output channels are already enabled by SRC_Channels::enable_aux_servos()
2017-10-22 15:52:50 +11:00
ChristopherOlson 7e086e8c4d AP_Motors: Fix DDFP so tail motor doesn't start without Channel 8 high 2017-10-05 13:41:34 +11:00
Andrew Tridgell f07aac396c AP_Motors: support inverted flight for helicopters 2017-10-03 10:16:41 +11:00
Peter Barker 35d8f11e46 AP_Motors: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas 1b062d9d29 AP_Motors: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 9d9ebc91cd AP_Motors: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Andrew Tridgell 2c4975ba31 AP_Motors: removed cork/push from AP_Motors
should be done by vehicle code if needed, so that AUX servos are sent
at the same time
2017-05-01 14:32:18 +10:00
Andrew Tridgell 638f1364be AP_Motors: adapt to new RC_Channel API 2017-01-12 17:39:37 +11:00
Pierre Kancir 8ef5067e12 AP_Motors: MotorsHeli_Single utilize an explicit type cast to avoid the loss of a fractional part. 2016-12-06 06:25:15 -08:00
Peter Barker 06b616f761 AP_Motors: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell 7cd7f03d56 AP_Motors: fixed use of trim on heli servos
this was broken by the servo range 0 to 1 changes
2016-10-13 09:34:48 +11:00
Andrew Tridgell 270fa95a8d AP_Morors: scale colyaw to match previous behaviour
this was missed in the motor scaling changes. Thanks to Rob for
noticing this.
2016-08-10 07:58:06 +10:00
Andrew Tridgell 11975223dd AP_Motors: added H_RSC_POWER_NEGC and H_RSC_SLEWRATE
this gives more control over throttle for petrol
helis. H_RSC_POWER_NEGC allows for a asymmetric V-curve, which allows
for less power being put into the head when landing or when sitting on
the ground. That can lead to significantly less vibration and chance
of ground oscillation. A heli not being flown with aerobatics does not
need to use high throttle at negative collective pitch.

The H_RSC_SLEWRATE allows for a maximum throttle slew rate to be
set. Some petrol motors can cut if the throttle is moved too
quickly. We had this happen at a height of 6m when switching from
ALT_HOLD to STABILIZE mode. It also lowers the chance of the blades
skewing in their holders with the sudden change of power when the heli
is disarmed. In general it is a bad idea to do instantaneous large
movements of a IC engine throttle.
2016-07-03 18:29:05 +10:00
Andrew Tridgell 7a9b4c7572 AP_Motors: fixed motor load calculation
scale to 1.0 for max collective
2016-06-19 13:50:04 +10:00
Andrew Tridgell f58d837026 AP_Motors: fixed heli RSC output range and float conversion
adds H_RSC_PWM_MIN, H_RSC_PWM_MAX and H_RSC_PWM_REV
2016-06-04 18:33:36 +10:00
Ricardo de Almeida Gonzaga 2802775e7d AP_Motors: Fix typos 2016-05-13 19:20:06 -03:00
dgrat 41661f815f AP_Math: Replace the pythagorous* functions with a variadic template
The new function can deal with a variable number of function parameters.
Additionally, I renamed the functions to norm(), because this is the
standard name used in several other projects.
2016-05-10 11:41:26 -03:00
Randy Mackay c4b88aafef AP_MotorsHeli: swash and tail servo objects moved into class 2016-04-01 11:59:30 +09:00
Randy Mackay b5593431bf AP_MotorsHeli_Single: replace collective_mid_pwm with collective_mid_pct 2016-04-01 11:59:30 +09:00
Randy Mackay a39bbc5421 AP_MotorsHeli: servo_test in range -1 to 1 2016-04-01 11:59:30 +09:00
Randy Mackay e1e4e37c92 AP_MotorsHeli_Single: use RSC class's get_idle_output function
No functional change
2016-04-01 11:59:30 +09:00
Randy Mackay 2cdc5da226 AP_MotorsHeli_Single: rotor speed functions in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 68945df45d AP_MotorsHeli_Single: write_aux uses 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay f2fc39943e AP_MotorsHeli_Single: remove unused delta_phase_angle 2016-04-01 11:59:30 +09:00
Randy Mackay 27fed39671 AP_MotorsHeli_Single: remove roll_scalar, pitch_scalar 2016-04-01 11:59:30 +09:00
Randy Mackay 71866be652 AP_MotorsHeliSingle: move_yaw in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay f6120b801b AP_MotorsHeliSingle: move_actuators in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 879e12ba43 AP_MotorsHeli_Single: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall d2a1cdf906 MotorsHeli: replace throttle_control_input with throttle_in
throttle_control_input was 0 to 1000 range, throttle_in is 0 to 1
2016-04-01 11:59:30 +09:00
Peter Barker a66da7be00 AP_Motors: correct parameter documenation 2016-03-17 16:10:10 +11:00
dgrat 5148e41c1a AP_Math: Cleaned macro definitions
Moved Definitions into a separate header. Replaced PI with M_PI and
removed the M_PI_*_F macros.
2016-02-27 02:51:33 -03:00
Andrew Tridgell 7c9ee9363b AP_Motors: added rc_map_mask() function 2016-01-06 22:09:40 +11:00
Andrew Tridgell dfccf8f713 AP_Motors: also wrap set_freq and enable_ch for motor mapping 2016-01-06 22:09:40 +11:00
Andrew Tridgell d31ba2b380 AP_Motors: added rc_write function
this is intended to make remapping motors and rescaling output easier
2016-01-04 16:56:54 +11:00