Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
65,724 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

65724 Commits

Author SHA1 Message Date
Andrew Tridgell f6726e66f8 AC_Fence: prevent a fetch R/C switch from disabling FENCE_AUTOENABLE=3 
we should only add fence types to the no auto-enable mask if the
enable actually changed that type of fence. This fixes the case where
the user has both FENCE_AUTOENABLE=3 and RCn_OPTION=11. The disable
triggered by the init of the aux function was preventing the fence
from auto-enabling
 2024-12-11 18:58:00 +11:00
Andrew Tridgell 42ad2a7911 autotest: added non-compass takeoff test 2024-12-11 08:44:15 +11:00
Andrew Tridgell c15fa7b943 Plane: fixed takeoff direction with no yaw source 
in TAKEOFF mode with either very poor yaw source or no yaw source we
need to use ground vector and wait for sufficient ground speed
 2024-12-11 08:44:15 +11:00
Andrew Tridgell 4f7a1fc81c Tools: support CANFD log playback in CAN_playback.py 2024-12-11 08:43:56 +11:00
Andrew Tridgell 7023650c69 Tools: added option for CAN logging 2024-12-11 08:43:56 +11:00
Andrew Tridgell c2864b5733 AP_CANManager: support CAN frame logging 
this supports logging of all bxCAN and CANFD frames, which helps with
debugging tricky CAN support issues and for the development of new CAN
driver lua scripts
 2024-12-11 08:43:56 +11:00
Andrew Tridgell 07a5e40aa1 AP_Logger: logging structures from AP_CANManager 2024-12-11 08:43:56 +11:00
Andrew Tridgell f5b0a447d8 AP_HAL: enable up to 3 CAN callbacks 2024-12-11 08:43:56 +11:00
Andrew Tridgell 00202bf016 AP_Airspeed: don't send AIRSPEED_AUTOCAL message when disabled 
we were wasting bandwidth sending this all the time

also fixed to support calibration messages for 2nd airspeed sensor
 2024-12-11 07:45:55 +11:00
Randy Mackay dd37065bb5 AP_Camera: camera-status-fov attitude in earth frame 2024-12-10 19:57:06 +09:00
Randy Mackay a9f561ac78 AP_Camera: always send camera-fov-status 2024-12-10 19:57:06 +09:00
Randy Mackay 5a1a8d1c10 AP_Mount: add get_attitude_quaternion method 2024-12-10 19:57:06 +09:00
Henry Wurzburg 051c2dcd35 Tools: add Plane autoland applet 2024-12-10 13:18:41 +11:00
Henry Wurzburg 637fea1f2d AP_Scripting: add Plane autoland applet 2024-12-10 13:18:41 +11:00
rishabsingh3003 031b5268a8 autotest: add test for stuck tether simulation 2024-12-10 10:48:00 +11:00
rishabsingh3003 99f4f13369 SITL: Add simulator for tethered vehicle 2024-12-10 10:48:00 +11:00
Andy Piper af0fe69085 AP_HAL_ChibiOS: don't throw an internal error on mismatched cork/push 2024-12-09 23:46:37 +00:00
Andy Piper 1d6d11283e AP_HAL: protect against invalid values when calculating Jain's estimator 2024-12-10 10:43:17 +11:00
Randy Mackay ec215c3a29 AP_DDS: default IP to 192.168.144.x 2024-12-10 10:37:30 +11:00
Randy Mackay 9d9eaa3150 AP_Networking: default IP to 192.168.144.x 2024-12-10 10:37:30 +11:00
Vincent Poon 13481ce4d8 add bmi270 support to kakuteh7 2024-12-10 10:33:26 +11:00
Rhys Mainwaring 3c561e215f AP_HAL_ESP32: set default cpu frequency to 240MHz 
Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
 2024-12-10 10:32:47 +11:00
Thomas Watson a14fb9ab28 AP_HAL_ESP32: regenerate sdkconfig after sdkconfig.defaults change 
Ensures the sdkconfig does not get out of date as updates are made to
the defaults. The sdkconfig can still be manually changed for testing.
 2024-12-10 10:32:47 +11:00
Thomas Watson 535f6875a8 AP_HAL_ESP32: move generated sdkconfig to build folder 
Ensures it gets cleaned with `./waf clean`. Users will hopefully delete
and not be confused by the old one as it will now show up as an
untracked file.
 2024-12-10 10:32:47 +11:00
YI-BOYANG 1b51d6ace3 Tools: add GEPRC_TAKER_H743 2024-12-10 10:30:54 +11:00
YI-BOYANG 122eb21b45 AP_HAL_ChibiOS: add GEPRC_TAKER_H743 2024-12-10 10:30:54 +11:00
Andrew Tridgell 7759bc7662 hwdef: enable IMU in HolybroG4_GPS 
IMU rate zero by default
 2024-12-10 09:29:37 +11:00
Andrew Tridgell 60f6a9deec waf: enable IMU in simulated AP_Periph 2024-12-10 09:29:37 +11:00
Andrew Tridgell 4c0ef40d3b AP_Periph: fixed IMU in periph 
wait_for_sample() can't handle very low sample rates without a
separate delay() by a ms value
 2024-12-10 09:29:37 +11:00
Andrew Tridgell 02ea371eae hwdef: added baro in HolybroG4_GPS 
new units have a ICP201XX baro

disable baro by default to avoid issues with airflow and GPS modules
installed on the outside of the aircraft
 2024-12-10 09:29:37 +11:00
Andrew Tridgell 4d31a7320a AP_InertialSensor: stop sensors converging if motors arm 
if the user arms within 30s of startup then stop the re-init of the
sensors. This can give less accurate frequency as the sample rate may
not have settled yet, but it is better than doing init of the filters
while the vehicle may be flying

also fix a 32 bit millis wrap
 2024-12-09 07:40:48 +11:00
Andrew Tridgell 8e1acb10fd Filter: enable 4 filters on low-flash boards 2024-12-09 07:40:06 +11:00
Andrew Tridgell 7a0af16d6c Tools: allow PID filtering to be enabled on custom build server 
we have a small plane with a SpeedyBeedF405Wing, 1M flash, that needs
PID filtering for some structural modes
 2024-12-09 07:40:06 +11:00
Iampete1 e4de4c9b41 AP_Scripting: Examples: message_interval: give checker a hint about types 2024-12-08 08:09:06 +09:00
shen 9d21b3396e hwdef: Add AEROFOX H7 2024-12-07 18:10:09 +11:00
shen f9285112a8 Tools: add AEROFOX H7 bootloaders 2024-12-07 18:10:09 +11:00
Andy Piper ad539ffa03 AP_RCTelemetry: add missing CRSF scheduler table entry 2024-12-05 10:03:27 -06:00
Randy Mackay 1308efb9a4 AP_Scripting: promote video-stream-information to applet 2024-12-05 16:46:48 +09:00
Randy Mackay 3325bdd7df AP_Scripting: set-video-stream-info encoding binding and docs 2024-12-05 16:46:48 +09:00
Randy Mackay 6f6613fefd AP_Camera: set-stream-information loses send-text 2024-12-05 16:46:48 +09:00
Thomas Watson d7b26a2205 AC_AutoTune: fix tracking of maximum angular acceleration 
Issue introduced in https://github.com/ArduPilot/ardupilot/pull/27370
and partially fixed in https://github.com/ArduPilot/ardupilot/pull/27762,
though evidently not properly tested.

Failing to track the maximum can result in dangerously low values being
calculated for `ATC_ACCEL_[RPY]_MAX` and the vehicle becoming unflyable.

Make the variable a reference so that the maximum value is preserved
between function calls.
 2024-12-05 09:18:56 +09:00
George Zogopoulos 9a5f81aa95 Plane: Added check for takeoff level-off timeout 
When an airspeed sensor is not used, during a takeoff, the pitch angle
is asymptotically driven to 0 as the takeoff altitude is approached.
Some airplanes will then stop climbing and fail to reach altitude.

To prevent an indefinite wait for the takeoff altitude to be reached, a
dedicated level-off timeout has been introduced.
 2024-12-04 18:07:30 +11:00
George Zogopoulos 768b2eabc4 autotest: Created test for unsuccessful takeoff level off 2024-12-04 18:07:30 +11:00
Andy Piper 3ed6ada2e3 Copter: allocation failure on rate thread start 2024-12-04 07:45:05 +11:00
Andy Piper 88f6125a94 AP_InertialSensor: belt and braces checks 2024-12-04 07:45:05 +11:00
Andy Piper 277386e6e2 AP_HAL_ChibiOS: add cork()/push() check 2024-12-04 07:45:05 +11:00
Andy Piper 4b0fa15278 AP_InertialSensor: address review comments 2024-12-04 07:45:05 +11:00
Andy Piper 96a70df75b Copter: address review comments 2024-12-04 07:45:05 +11:00
Andy Piper 3d43f2053f Copter: move RTDT logging to fast path 
log after motor output in fast rate thread
 2024-12-04 07:45:05 +11:00
Andy Piper 8fc4a6a6e9 AP_HAL_ChibiOS: add comments to force_push on rcout 2024-12-04 07:45:05 +11:00