Peter Barker
6da68e39f8
AP_Airspeed: add rc channel option to disable all airspeed sensors
2021-06-23 15:13:13 +10:00
Peter Barker
00002b78a4
AP_Airspeed: remove HIL support
2021-06-15 09:47:31 +10:00
QioTek
0190a42e47
AP_Airspeed: added ASP5033 driver
2021-03-28 07:50:34 +11:00
Andrew Tridgell
857d905d9f
AP_Airspeed: added MSP backend
2020-12-08 20:41:12 +11:00
Peter Barker
de2802e322
AP_Airspeed: populate airspeed_raw for sensors returning airspeed reading
...
Without this ARSP[x].Airspeed isn't populated
2020-12-08 11:59:49 +11:00
Peter Barker
8647dda8a9
AP_Airspeed: add and use instance number to ARSP message
2020-11-24 12:19:45 +11:00
Iampete1
0e41b821e8
AP_Airspeed: defualt to type none on sub
2020-10-27 11:24:49 +11:00
Iampete1
2aff8787c1
AP_Airspeed: add NMEA water speed backend
2020-10-27 11:24:49 +11:00
Iampete1
662d4640ef
AP_Airspeed: add dedicated MAX_WIND param
2020-10-27 11:21:04 +11:00
Andrew Tridgell
505953bdb2
AP_Airspeed: added get_num_sensors()
2020-08-27 20:20:51 +10:00
Andrew Tridgell
a20d3fed94
AP_Airspeed: allow hwdef override of airspeed default type
2020-08-25 09:59:15 +10:00
Siddharth Purohit
d65b43795a
AP_Airspeed: move to using CANManager library
2020-08-19 17:31:09 +10:00
Josh Welsh
eb4b5fb720
AP_Airspeed: Add additional DLVR support 20inH2O 30inH2O 60inH2O
2020-08-12 08:02:49 +10:00
Henry Wurzburg
21940cea09
AP_Airspeed: fix airspeed messages for consistency
2020-07-21 09:41:05 +10:00
Andrew Tridgell
40f1b5f9ae
AP_Airspeed: use GCS_SEND_TEXT()
2020-04-29 07:36:55 +10:00
Peter Barker
6046aa3625
AP_Airspeed: rename APMrover2 to Rover
2020-04-14 09:50:34 +09:00
Andrew Tridgell
b5e091bc84
AP_Airspeed: hide unused parameters for AP_Periph
2020-02-18 11:15:05 +11:00
Andrew Tridgell
f51378f2e8
AP_Airspeed: enable for use in AP_Periph
2019-10-21 19:12:01 +11:00
Andrew Tridgell
c173f8e24d
AP_Airspeed: support both 5inH2O and 10inH2O versions of DLVR sensor
...
useful for faster aircraft
2019-07-19 21:39:30 -07:00
Andrew Tridgell
1ffc2cbe41
AP_Airspeed: allow setting of default airspeed pin
2019-07-13 15:23:45 +10:00
Peter Barker
5cfba85095
AP_AirSpeed: take EAS2TAS directory from baro; use for all backends
...
Plane was only setting EAS2TAS in the primary frontend; calibration
expected it to be set on each instance.
2019-06-06 12:44:36 +10:00
Andrew Tridgell
bbe4c92b58
AP_Airspeed: skip cal on watchdog reset
2019-04-22 16:53:35 +10:00
Peter Barker
f0379ff7f0
AP_Airspeed: move logging of ARSP into Airspeed library
2019-04-09 09:29:35 +10:00
Peter Barker
59ef486da0
AP_Airspeed: add AP::airspeed() to get airspeed singleton
2019-04-09 09:29:35 +10:00
Peter Barker
4ab13b37ac
AP_Airspeed: logger uses the singleton for logging airspeed now
2019-04-09 09:29:35 +10:00
Tom Pittenger
e67b6e15fa
AP_Airspeed: rename dataflash to logger
2019-03-28 16:40:57 +11:00
Tom Pittenger
0c32453505
AP_Airspeed: unify singleton naming to _singleton and get_singleton()
2019-02-10 19:09:58 -07:00
Tom Pittenger
95c903c7cf
AP_Airspeed: disable airspeed (_TYPE=0) as rover default
2019-02-07 11:17:21 +09:00
Tom Pittenger
1a04a540f5
AP_Airspeed: convert the defines into static consts
...
- also perform logging at end of update
- convert Options Mask into an enum
2019-02-03 08:25:46 -08:00
ChrisBird
d77906cb06
AP_Airspeed: This adds the ability to turn off and on the airspeed sensor if faulty.
2019-02-03 08:25:46 -08:00
Nathan E
0401078694
Update AP_Airspeed.cpp
2019-01-23 09:24:18 -07:00
Peter Barker
6fc76a32af
GLOBAL: use AP::logger() and strip redundant Log_ from methods
2019-01-18 18:08:20 +11:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
DOMINATOR\Eugene
c81f9e6baa
AP_Airspeed: update data with logging
2018-11-17 07:52:42 +11:00
Michael du Breuil
88aa20d691
AP_Airspeed: Make user facing messages clearer, improve handling of bad tube order
2018-10-02 06:28:47 +10:00
liang.tang
653766c4cc
AP_Airspeed: uavcan airspeed supported
2018-09-05 17:22:08 +10:00
Michael du Breuil
f2b4e06a1a
AP_Airspeed: Add 5"H2O DLVR differential sensor driver
2018-08-08 09:07:17 +10:00
Michael du Breuil
6225f51815
AP_Airspeed: Remove APM doc references
2018-08-01 09:24:26 +10:00
Michael du Breuil
57f3e9cd88
AP_Airspeed: Remove unused ADC include
2018-07-17 09:29:50 +10:00
Andrew Tridgell
8a2f1fdb3d
AP_Airspeed: fixed airspeed filtering issue
...
this fixes an issue where an airspeed sensor that becomes unhealthy
can have an undue effect after the sensor becomes healthy again.
In a recent flight log the MS4525 airspeed sensor went unhealthy for a
few seconds, and at the same time gave a reading of 12m/s. The plane
was flying at 24m/s. While the sensor was unhealthy the code correctly
switched to the airspeed estimate, which was fine.
When the airspeed sensor become healthy again the IIR filter in
AP_Airspeed meant that the speed read at 12m/s initially, then came up
to 24m/s over a couple of seconds. This caused the VTOL motors to come
on for a few seconds.
2018-06-14 09:13:30 +10:00
Michael du Breuil
f6624cc8b2
AP_Airspeed: Use named float wrapper
2018-05-17 00:59:45 +01:00
Peter Barker
30f944b921
AP_AirSpeed: notify of calibration start
2018-04-02 23:25:05 +01:00
Michael du Breuil
a46c60f4de
AP_Airspeed: Create a singleton
2018-03-21 13:36:35 +00:00
Tom Pittenger
b1a4540359
Revert "AP_Airspeed: blending of several sensors and failure recognition"
...
This reverts commit 26c7614118
.
2018-03-09 13:12:05 -08:00
Eugene Shamaev
26c7614118
AP_Airspeed: blending of several sensors and failure recognition
2018-03-09 11:27:20 -08:00
David Ingraham
2547ca399a
AP_Airspeed: Fix ARSPD2_TYPE docs
2018-01-26 13:19:53 -08:00
Andrew Tridgell
58b0ac07ec
AP_Airspeed: support dual airspeed sensors
...
allow for a primary and secondary airspeed sensor
2018-01-16 07:14:20 +11:00
rde-mato
87e3777f67
AP_Airspeed: added SDP3X airspeed sensor driver
2018-01-16 07:14:20 +11:00
Michael du Breuil
5fedc65efb
AP_Airspeed: Allow specifying the MS5525 address
2018-01-10 17:49:35 +00:00
Mark Whitehorn
f32f51f843
AP_Airspeed: eliminate airspeed positive bias
2017-09-22 18:21:09 +10:00