Andrew Tridgell
dbd9814327
AP_Baro: get rid of apm2_hardware parameter in init
2012-12-20 14:51:38 +11:00
Andrew Tridgell
cafeaf91d6
AP_Baro: updates for new AP_Param API
2012-12-20 14:51:38 +11:00
Pat Hickey
475da4eca4
CONFIG_HAL_BOARD - test sketches fixed up, build all passes
2012-12-20 14:51:37 +11:00
Andrew Tridgell
2ea243e45b
AP_Baro: removed unused code
2012-12-20 14:51:37 +11:00
Pat Hickey
bfd03ab40c
AP_Baro: robust spi device
2012-12-20 14:51:35 +11:00
Pat Hickey
60f7788be4
AP_Baro: robust calibration
2012-12-20 14:51:35 +11:00
Pat Hickey
eaa0a990a4
AP_Baro: MS5611 robust semaphores
2012-12-20 14:51:35 +11:00
Pat Hickey
52925b655f
AP_Baro: MS5611 uses delay in busy wait
2012-12-20 14:51:35 +11:00
Pat Hickey
c1114168e4
AP_Baro tests rebase fixups
2012-12-20 14:51:29 +11:00
Pat Hickey
a4f1f6a5db
AP_Progmem: fix dependencies for all sketches touched by AP_HAL_AVR
2012-12-20 14:51:28 +11:00
Pat Hickey
668caa4a2e
Fix calls to AP_HAL::Scheduler::register_timer_process
2012-12-20 14:51:27 +11:00
Pat Hickey
5d40074e4e
AP_Baro: port to AP_HAL
2012-12-20 14:51:26 +11:00
Pat Hickey
3f1d9d7f69
AP_Param: #include <AP_Param.h> fixups for libraries & sketches
...
* I mostly went through with grep and added an #include <AP_Param.h> below
every #include <AP_Common.h>. Not all of these example sketches might
strictly need AP_Param.
2012-12-20 14:51:19 +11:00
Andrew Tridgell
3552f3f9c5
AP_Baro: fixed example build
2012-11-24 21:07:41 +11:00
Andrew Tridgell
e331634bc5
AP_Baro: switch to SREG = oldSREG pattern for interrupt mask/restore
2012-11-20 22:31:17 +11:00
rmackay9
56f88821e9
AP_AHRS: fix example sketch
...
AP_Airspeed: fix example sketch
AP_Baro: fix example sketch
AP_Declination: fix example sketch
AP_Math: fix example sketch
2012-11-08 00:08:18 +09:00
rmackay9
1c7118a2d1
AP_Baro: added get_last_update which returns the time the barometer sensor was last read
2012-11-07 19:21:25 +09:00
Andrew Tridgell
e5846bd965
AP_Baro: removed _sync_access check
...
this isn't needed as the common variables are already protected by
cli()/sei()
2012-09-20 17:34:33 +10:00
uncrustify
4cd6657f70
uncrustify libraries/AP_Baro/AP_Baro_BMP085_hil.h
2012-08-21 19:19:51 -07:00
uncrustify
fa90f0b80f
uncrustify libraries/AP_Baro/AP_Baro.h
2012-08-21 19:00:51 -07:00
uncrustify
1196285266
uncrustify libraries/AP_Baro/AP_Baro_MS5611.h
2012-08-21 19:00:50 -07:00
uncrustify
cfcef93e16
uncrustify libraries/AP_Baro/AP_Baro_BMP085.h
2012-08-21 19:00:50 -07:00
uncrustify
5a99d6b697
uncrustify libraries/AP_Baro/AP_Baro_BMP085.cpp
2012-08-21 19:00:18 -07:00
uncrustify
b0003c020f
uncrustify libraries/AP_Baro/AP_Baro_MS5611.cpp
2012-08-21 19:00:18 -07:00
uncrustify
b39411e8d4
uncrustify libraries/AP_Baro/AP_Baro_BMP085_hil.cpp
2012-08-21 19:00:18 -07:00
uncrustify
6f02a645c3
uncrustify libraries/AP_Baro/AP_Baro.cpp
2012-08-21 19:00:18 -07:00
uncrustify
12497c51b5
uncrustify libraries/AP_Baro/examples/AP_Baro_MS5611_test/AP_Baro_MS5611_test.pde
2012-08-21 19:00:18 -07:00
uncrustify
fce9044fb4
uncrustify libraries/AP_Baro/examples/AP_Baro_BMP085_test/AP_Baro_BMP085_test.pde
2012-08-21 19:00:17 -07:00
Andrew Tridgell
c9ba693e1f
AP_Baro: the HIL baro needs to inherit calibrate() from the parent class
...
this was what caused the renorm errors
2012-08-18 16:32:23 +10:00
Andrew Tridgell
034fb5b194
APM: fixed hil build
2012-08-16 12:53:37 +10:00
Andrew Tridgell
518d6365ff
AP_Param: update remaining libraries for new constructor syntax
2012-08-08 12:11:57 +10:00
Andrew Tridgell
a7b9aff79f
AP_Baro: the DerivativeFilter now handles duplicate data
...
this saves a few bytes of memory
2012-08-08 12:07:36 +10:00
Andrew Tridgell
f501503eb0
AP_Baro: improved barometer averaging
...
this changes the barometer calculations to floating point. On a MS5611
this is actually about twice as fast as the previous 64 bit
calculations, but gains us more accuracy as we are able to take
advantage of sub-bit precision when we average over 8 samples.
2012-07-06 15:11:30 +10:00
Andrew Tridgell
3c7e521f70
AP_Baro: update MS5611 test to use baro library altitude
2012-07-06 15:11:30 +10:00
Andrew Tridgell
209136386b
AP_Baro: added get_pressure_samples() interface
...
this returns how many samples were used to calculate the last pressure
2012-07-05 16:29:21 +10:00
Andrew Tridgell
185c6e5b32
AP_Baro: change to a 7 point DerivativeFilter for climb rate
2012-07-05 13:00:47 +10:00
Andrew Tridgell
f9fc7aafe7
AP_Baro: use DerivativeFilter in barometer climb rate
2012-07-05 13:00:46 +10:00
Andrew Tridgell
9f8703274c
AP_Baro: show climb rate in baro test sketch
2012-07-05 13:00:45 +10:00
Andrew Tridgell
057eb5e6f6
Baro: average over all pressure/temperature samples on MS5611
...
this allows us to use the MS5611 barometer at its full 100Hz sample
rate (80Hz for pressure, 20Hz for temperature). The pressure and
temperature values are averaged between reads without adding any
latency. Previously the driver would throw away values between
readings
This also fixes a race condition in reading from the SPI bus that
could lead to bad values from the barometer
2012-07-02 13:44:53 +10:00
Andrew Tridgell
f70cd71791
Baro: fixed build of MS5611 test code
2012-07-02 13:44:53 +10:00
Andrew Tridgell
5bccfbd94c
Barometer: fixed airstart for APM
...
we need to re-load the ground pressure and temperature from eeprom on
and airstart
2012-06-27 16:01:50 +10:00
Andrew Tridgell
c387edd74c
Baro: added get_altitude() and get_climb_rate() interfaces
...
this allows the barometer driver to calibrate and return altitude and
climb rate values. This will be used by the AHRS drift correction code
for vertical velocity
The climb rate uses a 5 point average filter
2012-06-27 16:01:50 +10:00
rmackay9
5c9dc00ae2
AP_Baro: fixed comment to clarify that every-other call updates temperature or pressure
2012-06-03 17:31:17 +09:00
Andrew Tridgell
88b2139d91
Baro: added suspend/resume on init
2012-05-01 12:06:54 +10:00
rmackay9
2d65ec2874
AP_Baro - change data type size of temperature's average filter to int32_t (was int16_t)
2012-03-24 23:21:11 +09:00
rmackay9
01cc5fe938
AP_Baro - removed unnecessary 2 element average filtering of pressure (there is a 4 or 5 element average filter in arducopter code itself, two places is messy)
...
- also removed unused _offset_press variable
2012-03-18 15:18:05 +09:00
rmackay9
7560242721
AP_Baro - added average filter for temperature to replace broken filter
...
- added average filter (for last two values) for raw pressure
- changed some "long" to int32_t and "unsigned long" to uint32_t
2012-03-18 01:06:02 +09:00
Jason Short
486c56ce41
Consolidated Barometer pressure sensing to a single filter based on Randy's new filter class.
2012-03-08 23:13:04 -08:00
Jason Short
e57b91c2e2
Updated on Barometer - increased the Temp filtering and decreased the pressure filtering to and get less temp noise, faster response from pressure. I'm filtering the Climb rate differently now, so this higher pressure noise should not hurt the derivative calcs at all now.
2012-03-06 20:55:35 -08:00
rmackay9
d81c951849
AP_Baro - fixed small compiler warning to do with order of parameters in constructor
2012-02-29 22:46:29 +09:00