Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-05 23:48:31 -04:00
Code Issues Packages Projects Releases Wiki Activity
30,739 Commits 71 Branches 510 Tags 764 MiB
f321c84f9d
Commit Graph

15856 Commits

Author SHA1 Message Date
Andrew Tridgell
100363ba03 AP_InertialSensor: if no sensors found allow parameter change 2018-01-20 10:36:22 +11:00
Andrew Tridgell
24c424ae5d AP_InertialSensor: support over 1kHz IMUs 
this allows for invensense IMUs to run above 1kHz by adjusting the
downsampling rate
 2018-01-20 10:36:22 +11:00
Andrew Tridgell
c0c5f23aa5 AP_InertialSensor: added INS_ENABLE_MASK 
this allows for only a specified subset of IMUs to be probed, so you
can disable IMUs that aren't needed.

The back corresponds to bits in the order the IMUs are normally probed
on the board
 2018-01-20 10:36:22 +11:00
Andrew Tridgell
9416165fe3 AP_InertialSensor: improved invensense debugging on ChibiOS 2018-01-20 10:36:22 +11:00
Leonard Hall
d5976442f8 AC_PosControl: minor comment change 
non-functional change
 2018-01-19 15:40:32 +09:00
Leonard Hall
3ada0f32b0 AC_AttitudeControl: minor comment update 
Non-functional change
 2018-01-19 15:40:24 +09:00
mirkix
700171a0fc AP_HAL_Linux: add second RCIN port for Blue 2018-01-17 15:25:51 -08:00
Michael du Breuil
8712fbd55d AP_BattMonitor: Move per battery params into a containing class 2018-01-17 22:21:55 +00:00
Michael du Breuil
bb0d43d03c AP_BattMonitor: Remove unneeded memebers 
is_powering_off was only used for solo, and was just an intermediate
copy before updating notify
 2018-01-17 22:21:55 +00:00
Michael du Breuil
a1a5665213 AP_Param: Support marking a param group as ignoring the enable flag 2018-01-17 22:21:55 +00:00
Nikita Tomilov
1549b1a52a AP_BoardConfig: CAN: Merge PX4 and Linux CAN setup 
Here we merge PX4 and Linux CAN bus setup since the interface is almost
the same for both of them.
 2018-01-17 07:24:17 -08:00
Tom Pittenger
d713d57904 AP_HAL_Linux: update software license referencing UAVCAN submodule 2018-01-17 07:24:17 -08:00
Nikita Tomilov
3ac2e4e8c5 AP_HAL_Linux: CAN: _pollRead no more than 100 iterations 
This adds a counter here to only loop to a maximum number of iterations.
Now we avoid situations in which we would be stuck processing packets here.
This also adds some other meaningful defines
 2018-01-17 07:24:17 -08:00
Nikita Tomilov
43bfcbc8e2 AP_HAL_Linux: CAN: Rename CANDriver -> CANManager 2018-01-17 07:24:17 -08:00
Nikita Tomilov
d0fc481202 AP_HAL_Linux: CAN: Rename Linux::LinuxCAN -> Linux::CAN 2018-01-17 07:24:17 -08:00
Alexey Bulatov
e0acbd3e53 AP_HAL_LINUX: Add CAN to timer_task 2018-01-17 07:24:17 -08:00
Alexey Bulatov
606eb05c95 AP_BoardConfig: Linux CAN initialisation 2018-01-17 07:24:17 -08:00
Nikita Tomilov
a50e6c6dd7 AP_HAL: board: linux: Add default CAN interface name 2018-01-17 07:24:17 -08:00
Nikita Tomilov
b6665f7e58 AP_HAL_Linux: CAN: get rid of RaiiCloser 2018-01-17 07:24:17 -08:00
Alexey Bulatov
976500960f AP_HAL_LINUX: Add CAN driver 2018-01-17 07:24:17 -08:00
Alexey Bulatov
09de8e852d AP_HAL: Make methods get_UAVCAN and set_UAVCAN pure 2018-01-17 07:24:17 -08:00
Dylan Herman
85e1f9f9f6 AP_SmartRTL: attempts to set home in update 
update will continuously attempt to set SmartRTL home as long as
position is ok and home has not be set. Updated examples to use set_home.
 2018-01-17 11:03:33 +09:00
Andrew Tridgell
8fea99e1da HAL_Linux: use calloc in preferance to malloc 2018-01-17 11:22:05 +11:00
Andrew Tridgell
3f5534eed5 AP_HAL: use calloc in preferance to malloc 2018-01-17 11:22:05 +11:00
Andrew Tridgell
f6138e3c91 HAL_ChibiOS: use calloc in preferance to malloc 2018-01-17 11:22:05 +11:00
Andrew Tridgell
20d75f52c2 AP_Compass: use calloc in preferance to malloc 2018-01-17 11:22:05 +11:00
Andrew Tridgell
c9deabc283 DataFlash: use calloc in MAVLink backend 2018-01-17 11:22:05 +11:00
Andrew Tridgell
8dae3fe59b HAL_ChibiOS: use calloc for malloc type 
this is not strictly necessary on ChibiOS as we already override
malloc, but will keep static analysis happy
 2018-01-17 11:22:05 +11:00
Andrew Tridgell
a99b690d49 HAL_PX4: use calloc for malloc_type() 
this ensures that EKF memory is zero on start
 2018-01-17 11:22:05 +11:00
Andrew Tridgell
4322ef7ca4 AP_HAL: prevent valgrind errors in EKF 
ensure that EKF memory is zero on start
 2018-01-17 11:22:05 +11:00
Randy Mackay
094620bc8a AC_WPNav: pass dt to avoidance 2018-01-16 12:13:48 +09:00
Leonard Hall
f48b14b810 AC_Avoidance: accept dt and pass to sqrt controller 2018-01-16 12:13:48 +09:00
Leonard Hall
b9ed8b292a AC_PosControl: pass dt to att control sqrt_controller 2018-01-16 12:13:48 +09:00
Leonard Hall
62cc25022c AC_AttitudeControl: protect against overshoot in sqrt controller 2018-01-16 12:13:48 +09:00
Leonard Hall
75de0cb4ef AC_AttitudeControl: sqrt_controller accepts dt 2018-01-16 12:13:48 +09:00
Leonard Hall
0a10deb3f7 AP_Motors: Fix gain scaling on Throttle Average Max and reduce additional gain on low throttle for Single and Coax. 2018-01-16 11:50:30 +09:00
Andrew Tridgell
7ca3b56886 HAL_ChibiOS: fixed STM32F405 typos 2018-01-16 09:46:30 +11:00
Andrew Tridgell
b6f3db44d8 DataFlash: log health and primary for airspeed 2018-01-16 07:14:20 +11:00
Andrew Tridgell
5846558b0e AP_Baro: moved constants to AP_Math/definitions.h 2018-01-16 07:14:20 +11:00
Andrew Tridgell
ee1fea55ce AP_Math: moved constants from AP_Baro 2018-01-16 07:14:20 +11:00
Andrew Tridgell
8bb0ad7f3a AP_Arming: check all airspeed sensors are healthy 2018-01-16 07:14:20 +11:00
Andrew Tridgell
bbcda11afe DataFlash: log both airspeed sensors 2018-01-16 07:14:20 +11:00
Andrew Tridgell
58b0ac07ec AP_Airspeed: support dual airspeed sensors 
allow for a primary and secondary airspeed sensor
 2018-01-16 07:14:20 +11:00
rde-mato
87e3777f67 AP_Airspeed: added SDP3X airspeed sensor driver 2018-01-16 07:14:20 +11:00
rde-mato
787420931e AP_Baro: make AP_Baro a singleton 
for AP_Airspeed
 2018-01-16 07:14:20 +11:00
Andrew Tridgell
e120e912f1 HAL_ChibiOS: moved board defines to hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell
d2c04aa649 AP_HAL: moved board defines to hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell
f8542c86b6 AP_Terrain: added support for AP_Terrain for ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
2773b17fad AP_HAL: added support for AP_Terrain for ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
e2a65c8c60 HAL_ChibiOS: added support for AP_Terrain for ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
cde930f5c8 HAL_ChibiOS: added skyviper-v2450 hwdef config 2018-01-15 11:46:02 +11:00
Andrew Tridgell
c8beddf1e4 HAL_ChibiOS: allow for includes in hwdef.dat files 
this allows creation of derived boards
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
2929b3dbb1 HAL_ChibiOS: allow builds on systems with no SDIO 2018-01-15 11:46:02 +11:00
Andrew Tridgell
7b0eccc309 HAL_ChibiOS: updated skyviper-f412 hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell
60a773d045 HAL_ChibiOS: removed duplicate defines 2018-01-15 11:46:02 +11:00
Andrew Tridgell
ff87d27143 AP_BoardConfig: fixed return of get_pwm_count() 
thanks to Michael for noticing
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
ef1a14cc6c HAL_ChibiOS: fixed 5V analog scale on fmuv4 and mindpx-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell
867e7ebf71 HAL_ChibiOS: auto-generate GPIO table from hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell
fbe8166c71 HAL_ChibiOS: auto-generate AnalogIn pin table 2018-01-15 11:46:02 +11:00
Andrew Tridgell
f14a847b97 HAL_ChibiOS: rename classes to remove 'Chibi' 
it is redundent as all classes are in ChibiOS namespace, and makes the
code harder to read
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
25b68dc150 HAL_ChibiOS: switch base freq when needed 
timers can't do below 123 Hz with a clock of 8MHz, so we need to
change clock frequency based on the target period
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
ff3b0ec1bd AP_IOMCU: added set_default_rate method 2018-01-15 11:46:02 +11:00
Andrew Tridgell
738d70ef02 HAL_ChibOS: fixed handling of disabled channels 2018-01-15 11:46:02 +11:00
Andrew Tridgell
320ada2002 AP_IOMCU: fixed crash with BRD_IO_ENABLE=0 2018-01-15 11:46:02 +11:00
Andrew Tridgell
2978649cd4 waf: moved to generated loader script 2018-01-15 11:46:02 +11:00
Andrew Tridgell
6e4ef32628 HAL_ChibiOS: moved to generated loader script 2018-01-15 11:46:02 +11:00
Andrew Tridgell
9482ab1840 waf: use common makefile for ChibiOS if no custom present 2018-01-15 11:46:02 +11:00
Andrew Tridgell
bae9469af7 HAL_ChibiOS: use a common makefile and board.c 
allow for custom files per board if supplied, but don't require them
for every board
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
d17e9f321a HAL_ChibOS: fixed mixture of brushed and normal PWM 
allow non-brushed PWM servos with brushed main motors
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
c639708e22 HAL_ChibOS: auto-generate full PWM config 
use PWM markers in hwdef.dat to mark each PWM channel
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
b741c6c29e AP_Compass: fixed build error on ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
daa9eec836 HAL_ChibiOS: auto-configure timer channels 
allow for one marked PPMIN for input
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
d65ec2ada7 HAL_ChibiOS: moved more headers to common 
allow customisation, but don't require every port to copy the defaults
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
960bc40ff3 HAL_ChibiOS: moved to a common mcuconf.h 2018-01-15 11:46:02 +11:00
Andrew Tridgell
48d2704cf4 HAL_ChibiOS: CS pins don't need to be a single SPI BUS 
its possible to use a CS pin on different buses, so they should not
have a particular bus tag
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
a554215576 HAL_ChibiOS: start to cope with not having I2C, SPI and UARTs 2018-01-15 11:46:02 +11:00
Andrew Tridgell
f5c8754d75 HAL_ChibiOS: use ARRAY_SIZE_SIMPLE 
this allows for boards without a device type (eg. no SPI bus)
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
7aeab8f5a8 AP_Common: added ARRAY_SIZE_SIMPLE() 
this works with zero length arrays
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
468cadca45 HAL_ChibiOS: auto-generate UART driver declarations 2018-01-15 11:46:02 +11:00
Andrew Tridgell
8e87c30a33 AP_Compass: fixed MindPX-v2 compass orientations 2018-01-15 11:46:02 +11:00
Andrew Tridgell
8ab35e8aca AP_InertialSensor: fixed MindPX-v2 orientation of IMU2 2018-01-15 11:46:02 +11:00
Andrew Tridgell
58796ff435 HAL_Chibios: moved SPI device tables to hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell
d1f93cd66c HAL_Chibios: auto-generate I2C, SPI and UART device lists 
this is less error prone and make a port faster as more information is
in hwdef.dat
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
c80149123f AP_HAL: use hwdef.h for config options in chibios 2018-01-15 11:46:02 +11:00
Andrew Tridgell
dcab40459d AP_InertialSensor: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell
8699b6233a AP_HAL: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell
36a141f9f1 AP_Compass: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell
5458377e67 AP_BoardConfig: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell
51f9f087ab AP_Baro: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell
280140bf25 HAL_ChibiOS: added support for MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell
febe414766 AP_InertialSensor: disable fast sampling on 2nd IMU on Pixracer 
it also hosts a mag, and gets lots of FIFO resets if we try to run it
at 8kHz
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
9f5e01d20a HAL_Chibios: fixed FMUv4 compasses 2018-01-15 11:46:02 +11:00
Andrew Tridgell
2646b9ef33 HAL_Chibios: matched debug port speed to NuttX 2018-01-15 11:46:02 +11:00
Andrew Tridgell
41be81af34 HAL_Chibios: added hardware flow control for UARTs 
implement RTS in software and CTS in hardware
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
9916a93919 HAL_ChibiOS: fixed I2C device list 2018-01-15 11:46:02 +11:00
Andrew Tridgell
f135e73e04 HAL_ChibiOS: F412 doesn't have CCM ram 2018-01-15 11:46:02 +11:00
Andrew Tridgell
85f4958e4e AP_OpticalFlow: use AP_FEATURE_BOARD_DETECT 2018-01-15 11:46:02 +11:00
Andrew Tridgell
3fc095589c AP_InertialSensor: support ChibiOS FMUv4 2018-01-15 11:46:02 +11:00
Andrew Tridgell
0b6659b36a AP_Baro: support ChibiOS FMUv4 2018-01-15 11:46:02 +11:00
Andrew Tridgell
02c3bea5a5 AP_BoardConfig: support ChibiOS FMUv4 2018-01-15 11:46:02 +11:00
Andrew Tridgell
743714de4c AP_Compass: support ChibiOS FMUv4 2018-01-15 11:46:02 +11:00
Andrew Tridgell
c7fd455f6a AP_HAL: added FMUv4 port for ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
c3435e45c5 HAL_ChibiOS: initial port to FMUv4 2018-01-15 11:46:02 +11:00
bugobliterator
5feef04f5f HAL_ChibiOS: add support for CCM memory 
this uses DMA bounce buffers for bus transfers, and falls back to CCM
ram in allocations if the type is unspecified
 2018-01-15 11:46:02 +11:00
bugobliterator
ea2a880d8a AP_NavEKF3: allocate from MEM_FAST region 2018-01-15 11:46:02 +11:00
bugobliterator
b1213a522d AP_NavEKF2: allocate NavEKF core from MEM_FAST region 2018-01-15 11:46:02 +11:00
bugobliterator
1c6beaa7c4 AP_InertialSensor: use new API for DMA safe allocation 2018-01-15 11:46:02 +11:00
bugobliterator
e591265329 HAL_PX4: change dma_allocate api to malloc_type 2018-01-15 11:46:02 +11:00
bugobliterator
9d6ab78376 AP_HAL: add support for memory allocation by region type 2018-01-15 11:46:02 +11:00
Andrew Tridgell
08346deed5 AP_BattMonitor: run SMBus batteries at 100kHz 
use longer timeouts and SMBUS mode. This fixes the SMBus battery
support for Solo on ChibiOS
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
f2102bba05 HAL_VRBrain: fixed I2C get_device() interface 
just stubs for now
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
ded22a6766 HAL_PX4: fixed I2C get_device() interface 
just stubs for now
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
43c1bd0ae9 HAL_Linux: fixed I2C get_device() interface 
just stubs for now
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
5e19183e90 HAL_Empty: fixed I2C get_device() interface 2018-01-15 11:46:02 +11:00
Andrew Tridgell
36227aa126 HAL_ChibiOS: implement bus speed and smbus for I2C 
use the slowest speed of all devices on the bus
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
8260b3f65f AP_HAL: allow bus speed and SMBUS enable on I2C 
this allows a driver to request a bus speed for a device, and whether
the device should be in SMBUS mode. It also allows a min timeout to be
specified, to allow for slow devices
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
4b5e617673 HAL_ChibiOS: added missing DMA table for STM32F405 2018-01-15 11:46:02 +11:00
Peter Barker
f3d46506b0 AP_HAL_Chibios: warning fixes 2018-01-15 11:46:02 +11:00
Andrew Tridgell
791edee0ff HAL_Chibios: added more SPI devices for FMUv3 2018-01-15 11:46:02 +11:00
Andrew Tridgell
ddf8523c2b AP_OpticalFlow: prevent crash on bad device name 2018-01-15 11:46:02 +11:00
Andrew Tridgell
755eca31c2 HAL_Chibios: don't unregister shared DMA 
the shared DMA handle is a property of the bus, not the device, so
should not be unregistered when the device is removed
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
9812fc9574 HAL_Chibios: prevent creation of i2c devices on invalid bus 2018-01-15 11:46:02 +11:00
Andrew Tridgell
82b5b94e24 AP_IOMCU: fixed race condition on thread startup 
thread_ctx may not be set for first trigger_event()
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
b62773bbad HAL_ChibiOS: improved auto-config of ADC pins 
ADC config now based on pin_scaling array
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
1cc4b92b76 HAL_ChibiOS: added additional FMUv3 analog pins 2018-01-15 11:46:02 +11:00
Andrew Tridgell
aa2175ec0c HAL_ChibiOS: show ADC1 channels in hwdef.h 2018-01-15 11:46:02 +11:00
Andrew Tridgell
5a7e2f75d1 HAL_ChibiOS: added ADC1_Map to STM32 tables 2018-01-15 11:46:02 +11:00
Andrew Tridgell
3a004adbd4 HAL_Chibios: use macro for NUM_GROUPS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
b57f8f01c6 HAL_Chibios: fixed return for read on invalid gpio pin 2018-01-15 11:46:02 +11:00
Andrew Tridgell
82cc36d6d0 AP_BoardConfig: called board_setup() even without autodetect 
we need to init hal.rcou and hal.gpio
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
b1ebbd1a1c AP_BoardConfig: enable auto-detect only on FMUv3 
F412 should not do board detection
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
7971f03bde Hal_Chibios: fixed F412 SPI config 2018-01-15 11:46:02 +11:00
Andrew Tridgell
51512ed7c0 AP_Param: don't panic on bad embedded parameters 
this makes life much easier for vendors
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
21f40da510 HAL_Chibios: align GPIO pins with px4 build 2018-01-15 11:46:02 +11:00
Andrew Tridgell
60b1eab06d AP_BoardConfig: added get_pwm_count() 2018-01-15 11:46:02 +11:00
Andrew Tridgell
26d6947bf6 HAL_ChibiOS: fixed PWM output 2018-01-15 11:46:02 +11:00
Andrew Tridgell
e88fe93688 AP_BoardConfig: init chibios IO after boardconfig 
this allows for the init to use parameters such as BRD_IO_ENABLE from
AP_BoardConfig
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
c742543565 HAL_Chibios: align SPI device IDs with px4 IDs 
this makes for easier update to ChibiOS without redoing accelcal
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
7cb1c0420a AP_BoardConfig: include BRD_IO_ENABLE on ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
4ce696a520 AP_Math: fixed example build on ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
347c774665 AP_HAL: fixed example build on ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
2941afa62b AP_Beacon: fixed example build on ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
f5b24a3838 AP_Math: fixed build of Sub with ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
6dbab450a5 Hal_Chibios: use AP_BoardConfig::io_enabled() 2018-01-15 11:46:02 +11:00
Andrew Tridgell
13f4780815 AP_BoardConfig: make a singleton 
allows for io_enabled() static function
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
340d85642e AP_Gripper: build fix for ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
c0c4021605 SRV_Channels: fix for replay 2018-01-15 11:46:02 +11:00
Andrew Tridgell
d0d6040b3e AP_Param: use wider range of sentinal values 
this copes better with power off while writing parameters
 2018-01-15 11:46:02 +11:00
bugobliterator
be4e9f27f7 AP_Module: restrict module related headers to systems that can use it 2018-01-15 11:46:02 +11:00
Andrew Tridgell
3d2c4ffa79 AP_Math: allow write to indexed vector2 2018-01-15 11:46:02 +11:00
Andrew Tridgell
f088c3de23 AP_Math: added long templates 2018-01-15 11:46:02 +11:00
Andrew Tridgell
c62dbcdb62 HAL_PX4: allow for printf from multiple threads 
this is useful for hal.console
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
979ee67c19 HAL_PX4: cope with failed flash writes 
we need to recover from possible bad flash
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
86fbdcd060 HAL_ChibiOS: ensure malloc returns zeroed memory 2018-01-15 11:46:02 +11:00
Andrew Tridgell
e255f07022 GCS_MAVLink: rename ch variable 
avoid conflict with ch variable from ChibiOS
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
43a6ed4099 DataFlash: support ChibiOS FATFS implementation 2018-01-15 11:46:02 +11:00
Andrew Tridgell
3cd5386a7e AP_OpticalFlow: support ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
3b5f66fd9f AP_FlashStorage: fixed size of flash storage 2018-01-15 11:46:02 +11:00
Andrew Tridgell
0bfbc4bf72 AP_FlashStorage: added re_initialise() API 2018-01-15 11:46:02 +11:00
Andrew Tridgell
d1fd843539 AP_IOMCU: support IMU heater 2018-01-15 11:46:02 +11:00
Andrew Tridgell
1568f578d7 AP_IOMCU: added retries on event failure 2018-01-15 11:46:02 +11:00
Andrew Tridgell
9b9b4a169e AP_IOMCU: fixed build on systems without IO MCU 2018-01-15 11:46:02 +11:00
Andrew Tridgell
71a47303b4 AP_IOMCU: support servo voltage and rssi 2018-01-15 11:46:02 +11:00
Andrew Tridgell
bb3ed9d6a3 AP_IOMCU: added APIs for RC input 2018-01-15 11:46:02 +11:00
Andrew Tridgell
ceeade5822 AP_IOMCU: added periodic reading of RC input 2018-01-15 11:46:02 +11:00
Andrew Tridgell
06322da4e2 AP_IOMCU: added setting of output rates 2018-01-15 11:46:02 +11:00
Andrew Tridgell
39f60adcd7 AP_IOMCU: initial implementation of PWM and safety 2018-01-15 11:46:02 +11:00
Andrew Tridgell
0c01ae1223 AP_IOMCU: started on MCU IO library 2018-01-15 11:46:02 +11:00
Andrew Tridgell
f37d1e3363 AP_RAMTRON: added RAMTRON fram device driver 
for parameter storage on most stm32 boards
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
39362a81ae AP_InertialSensor: support ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
391affc02d AP_HAL: support ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
5d9fa7f85b AP_Compass: support ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
c8c563f90d AP_Baro: support ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
f8bea3af14 AP_BattMonitor: support ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell
accac344f2 AP_BoardConfig: support ChibiOS as well as NuttX 
allow for board detection with ChibiOS
 2018-01-15 11:46:02 +11:00
Andrew Tridgell
8b6bab7b17 HAL_Chibios: added ChibiOS HAL 
this is based on initial work by Sid, reset here for easier merging
 2018-01-15 11:46:02 +11:00
Michael du Breuil
8ef7e61066 AP_HAL_SITL: Spam u-blox NAV-SVINFO at 0.1Hz 
This resolves EKF3 being hung on launch
 2018-01-13 10:13:00 +09:00
Leonard Hall
eb6ab53f6c AP_Motors: fix optimum thrust calcs 2018-01-13 10:06:11 +09:00
Randy Mackay
4d0c24f4eb AC_WPNav: RFND_USE param desription update 2018-01-12 16:50:00 +09:00
Leonard Hall
cddd815a75 AC_AttitudeControl: comment thrust_heading_rotation_angles 
non-functional change
 2018-01-12 15:20:47 +09:00
Randy Mackay
86cbc445bd AP_Compass: ICM20948 default rotation to Pitch180Yaw90 2018-01-12 08:16:41 +09:00
Randy Mackay
5e90cdbf59 AR_AttitudeControl: parameter desc range increase 
new steering controller can use higher FF and zero P
 2018-01-12 08:15:34 +09:00
Leonard Hall
3e0c24adf9 AC_PosControl: remove out-of-date comments 2018-01-11 21:18:34 +09:00
Peter Barker
18d7d3f038 DataFlash: add missing FALLTHROUGH declarations 2018-01-11 13:23:06 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
596119bca3 GCS_MAVLink: do not use hardcoded array sizes 2018-01-11 09:52:13 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas
24ad9e9dff GCS_MAVLink: Adapt to upstream mavlink changes in autopilot_version message 2018-01-11 09:52:13 +11:00
Tom Pittenger
36f06d3576 AP_InertialSensor: remove AP_InertialSensor_UserInteract 
leftover dead code from when CLI was removed
 2018-01-11 08:11:07 +11:00
Peter Barker
8d7c710e9b GCS_MAVLink: panic in SITL if unknown message sent 2018-01-10 19:11:15 +00:00
Michael du Breuil
5fedc65efb AP_Airspeed: Allow specifying the MS5525 address 2018-01-10 17:49:35 +00:00
Andrew Tridgell
e5813effff RC_Channel: improved efficiency of min_max_configured 
this is quite a costly function due to scan in AP_Param. It takes
about 4 to 5 milliseconds when done as part of AP_Arming
 2018-01-10 16:42:51 +09:00
Peter Barker
404e395880 DataFlash: avoid declarations of SITL-only functions 2018-01-09 23:21:58 +00:00
Peter Barker
fd0aa3c659 DataFlash: add validation for Log_Write parameters 2018-01-09 23:21:58 +00:00
Peter Barker
5070628230 DataFlash: factor out validate_structure 2018-01-09 23:21:58 +00:00
mirkix
8d7000db2c AP_HAL_Linux: fix typo 2018-01-09 12:54:03 -08:00
Michael du Breuil
9e37e9ee82 AP_GPS: Remove unused blending function. 
Thanks to ender-chen for noticing, closes #7510
 2018-01-09 12:52:32 -08:00
Peter Barker
c8e0ae6890 AC_Fence: adjust fence sys_status failed based on position and parameters 2018-01-09 17:15:19 +00:00
Peter Barker
e30a6bbce3 AC_Fence: rename sys_status methods from geofence_ to sys_status_ 2018-01-09 17:15:19 +00:00
Peter Barker
a5aafab7ff AC_Fence: use pre-arm checks for sanity checks 
Magically resetting people's parameters not a great look.
 2018-01-09 17:15:19 +00:00
Peter Barker
155407956c AC_Fence: add a pre-arm check for polygon fence validity 
Also change SYS_STATUS bit to be unhealthy if boundary invalid
 2018-01-09 17:15:19 +00:00
Peter Barker
aba525e4c5 GCS_Console: remove GCS_Console 2018-01-09 13:46:22 +00:00
Dr.-Ing. Amilcar Do Carmo Lucas
f6ab044161 GCS_MAVLink: add microseconds since boot to the home and origin Mavlink messages 2018-01-09 13:01:05 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas
479d4be3fd AP_GPS: Add horizontal, vertical and speed accuracy to the GPS_RAW_INT message 2018-01-09 13:01:05 +11:00
Hiroshi Takey (hiro2233)
aa6f66f29b AP_Motors: Updated Motor example. 2018-01-09 08:12:01 +09:00
Randy Mackay
1bb18bc941 AR_AttitudeControl: get_throttle_out_speed uses timeout definition 2018-01-05 13:33:21 +09:00
Randy Mackay
4ac5ef3a13 AR_AttitudeControl: allow filter to be zero 
Also increase default filter to 50hz
 2018-01-05 13:33:21 +09:00
Randy Mackay
16d3e5c00d AR_AttitudeControl: add feed foward for speed and steering rate control 2018-01-05 13:33:21 +09:00
Randy Mackay
40bb2b0ad9 AR_AttitudeControl: set throttle speed pid dt 2018-01-05 13:33:21 +09:00
Randy Mackay
9930550cfc AR_AttitudeControl: lengthen timeout to 200ms 
This is required because occasionally the turn rate controller can be disabled for just over 100ms as new navigation commands are loaded
 2018-01-05 13:33:21 +09:00
Randy Mackay
a2b1807ca0 AR_AttitudeControl: fix turn-rate controller timeout 2018-01-05 13:33:21 +09:00
Randy Mackay
4e8155f4e5 AC_PID: allow non-zero ff gain default 2018-01-05 13:33:21 +09:00
Randy Mackay
1531801c83 AP_WheelEncoder: minor comment fix 2018-01-04 14:08:17 +09:00
Matt
b5bdaa18ac AP_AVOIDANCE: Minimum altitude for avoidance action 2017-12-30 13:50:42 -08:00
dheideman
521bece9e7 AP_JSButton: Add servo toggle button function 2017-12-28 14:14:47 -05:00
dheideman
307638e8af AP_JSButton: Add momentary servo button function 2017-12-28 14:14:47 -05:00
dheideman
dd239183c1 AP_JSButton: Add momentary relay button function 2017-12-28 14:14:47 -05:00
Peter Barker
588b0c17c8 AC_Fence: remove AC_FENCE_TYPE_NONE define 
0 is the appropriate value for a bitmask which is empty
 2017-12-28 15:38:37 +00:00
Peter Barker
aa482bae40 AC_Fence: remove argument to check() 
Also, rename check_fence() to check()
 2017-12-28 15:38:37 +00:00
Andrew Tridgell
55f73f4163 AP_Airspeed: fixed timing errors in MS5525 driver 
this fixes issue #7188, where we could read from the MS5525 sensor too
soon after requesting data and the result coming back would be garbage
 2017-12-27 11:05:54 -08:00
mirkix
4b1ec08eaf AP_BattMonitor: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix
0926802013 AP_Notify: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix
9b6a826b49 AP_HAL_linux: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix
0e7ade6f0c AP_HAL: add new board PocketPilot 2017-12-27 16:01:55 +00:00
Pierre Kancir
8c8767e964 AP_InertialSensor: reduce QURT include scope 2017-12-27 15:13:30 +00:00
Pierre Kancir
14b5c8a6c4 AP_Baro: don't include vehicle specific baro by default 2017-12-27 15:13:30 +00:00
Peter Barker
a35e86c2fd AP_SmartRTL: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker
7646e09349 AP_OpticalFlow: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker
e584a90c81 AP_Module: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker
89d3289400 AP_Mission: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker
5dc714bf5f AP_NavEKF3: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker
9c8466dc03 AP_NavEKF2: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker
aea460df2c AP_FrSky: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker
e15442355a AP_AHRS: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker
ca4f25a78e AP_Terrain: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker
fb3cba3867 AP_Mount: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker
a4584431a2 AP_Landing: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker
d1d5a484ce AP_ADSB: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker
e0c586876b APM_Control: use GPS singleton 2017-12-27 00:58:02 +00:00
Hiroshi Takey (hiro2233)
fb5b6f2169 AP_Airspeed: Updated Airspeed example. 2017-12-26 14:57:58 +00:00
Peter Barker
dea15892dc AP_Volz_Protocol: use AP::serialmanager() 2017-12-21 04:35:11 +00:00
Peter Barker
b3f5e807a6 AP_SerialManager: add AP::serialmanager() 2017-12-21 04:35:11 +00:00
Pierre Kancir
6728598099 AP_Rangefinder: don't include Bebop rangefinder by default 2017-12-21 04:13:09 +00:00
Pierre Kancir
be96a27fa8 AP_NavEKF3: only report terrain estimator innovations with valid rng value 2017-12-18 22:51:46 +00:00
Pierre Kancir
171e80d8dc AP_NavEKF2: only report terrain estimator innovations with valid rng value 2017-12-18 22:51:46 +00:00
khancyr
2732226664 AP_AHRS: use direct assignation and correct some style 2017-12-18 22:43:59 +00:00
khancyr
dae636b39e AP_AHRS: correct some constcorrectness 2017-12-18 22:43:59 +00:00
khancyr
d89d496c8f AP_AHRS: make getter const 2017-12-18 22:43:59 +00:00
mirkix
eecd8fcfa6 AP_HAL_Linux: Add VOLTAGE_SCALING for BeagleBone Blue 2017-12-19 09:17:06 +11:00
Andrew Tridgell
4ac49483c8 AP_Param: added support for embedded parameters 
use a block of flash to hold embedded parameters that can be changed
using apj_tool.py
 2017-12-18 11:14:59 +11:00
Peter Barker
738377c089 AP_Arming: remove airspeed arming check bits from non-plane vehicles 2017-12-16 11:08:35 +11:00
Peter Barker
0f94fde434 AC_Fence: get home distance directly from ahrs 2017-12-15 01:42:49 +00:00
Peter Barker
20e295c23a AC_Fence: check supplied location within fence rather than current loc 2017-12-15 01:24:13 +00:00
Peter Barker
dff27ec506 AC_WPNav: correct call for getting location vector 
Function has been renamed and only takes a Vector2f
 2017-12-15 01:24:13 +00:00
Peter Barker
302e5c6871 AP_Common: have get_vector_xy_from_origin_NE take a Vector2f rather than 3f 
Also, rename it from get_vector_xy_from_origin_NED
 2017-12-15 01:24:13 +00:00
mirkix
26f3a62db7 AP_HAL_Linux: remove BBBmini from RCInput_PRU.cpp 2017-12-14 12:40:37 -08:00
Mark Whitehorn
f57eab3482 AP_SerialManager: add Volz and Sbus protocols to param metadata 2017-12-14 19:27:02 +00:00
ChristopherOlson
569f55f5c6 AC_AttitudeControl:TradHeli - fix for alt_hold angle limiter active at hover collective in Traditional Helicopters 
add definition for max collective/throttle for helicopters that compensates for negative collective pitch range
and sets proper collective overhead before alt_hold angle limiter becomes effective
 2017-12-14 20:46:13 +09:00
Andrew Tridgell
1c503ee459 SRV_Channel: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
fd14dedcff DataFlash: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
15026c6898 AP_Volz_Protocol: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
d175fb2f18 AP_Terrain: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
b6ecce8329 AP_TECS: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
003851a5c1 AP_SmartRTL: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
1cdbb09466 AP_ServoRelayEvents: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
dd489a0797 AP_SerialManager: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
580af4a69a AP_Scheduler: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
dec3a27d91 AP_SBusOut: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
076f7bc0cf AP_RSSI: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
9b4fef4d50 AP_RPM: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
16cd31b63a AP_Relay: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
e9b847b5ee AP_RCMapper: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
ffced7d591 AP_RangeFinder: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
7122cae589 AP_Rally: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
e798b38271 AP_Parachute: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
0d4dca0394 AP_OpticalFlow: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
cd51c71857 AP_Notify: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
c13eaf0c7f AP_NavEKF3: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
4d4e66d825 AP_NavEKF2: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
3d2c81ff05 AP_Mount: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
c72c1de99e AP_Module: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
a3e07f66a1 AP_Mission: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
1dac512567 APM_Control: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
5f4680bf2c AP_LeakDetector: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
645508224f AP_Landing: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
ad99b04de7 AP_LandingGear: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
31092da426 AP_L1_Control: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
99499dece2 AP_InertialSensor: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
d2c9e2719e AP_GPS: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
c618a27ee0 AP_Frsky_Telem: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
f326377a5c AP_Compass: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
573a5bf3d0 AP_Camera: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
a4d2d79ce7 AP_BoardConfig: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
ca91edbbeb AP_Beacon: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
a4c56fcb82 AP_BattMonitor: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
68f8817e97 AP_Baro: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
8c1cf9affe AP_Airspeed: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
0ccaa5bcba AP_AHRS: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
6487a22acd AP_ADSB: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
85f9fecd24 AC_Sprayer: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
9ba8097502 AC_PrecLand: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
25c409d4a2 AC_InputManager: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
25b9a7e711 AC_Fence: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
d5c55e0dfe AC_Avoidance: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell
7a6ab4ac44 AP_AHRS: fixed a bug with startup ordering of SITL 
this fixes a crash that can happen with SITL
 2017-12-13 14:09:39 +11:00
Peter Barker
86fe1671c1 AC_Fence: fix comment 2017-12-13 10:04:50 +09:00
Peter Barker
e8151a7ec1 AC_Fence: require home as well as origin for prearm checks 2017-12-13 10:04:50 +09:00
Peter Barker
1ecfdffa76 AC_Fence: methods to help populate SYS_STATUS 2017-12-13 10:04:50 +09:00
Peter Barker
ac3f030a34 AC_Fence: factor out check_fence_alt_max 
NFC
 2017-12-13 10:04:50 +09:00
Peter Barker
d04a4dd0f8 AC_Fence: factor out check_fence_circle 
NFC
 2017-12-13 10:04:50 +09:00
Peter Barker
d379c7bbd9 AC_Fence: factor out check_fence_polygon 
NFC
 2017-12-13 10:04:50 +09:00
Peter Barker
5eeed442c8 AP_AHRS: correct comment 2017-12-13 10:04:50 +09:00
Peter Barker
518399c13a AC_Fence: stop looking at EKF filter status 
Fence has no business looking at what the filter status is.

Fence should only care whether it can currently get a position.
 2017-12-13 10:04:50 +09:00
khancyr
65373b85f0 AC_Fence: replace AP_InertialNav by AHRS 2017-12-13 10:04:50 +09:00
priseborough
3b32d583a9 AP_NavEKF2: Fix delta time use error 2017-12-12 11:39:38 +11:00
priseborough
440d361aff AP_NavEKF2: Limit range of delta times 2017-12-12 11:39:38 +11:00
Andrew Tridgell
6b30c9213a AP_NavEKF3: delay startup until IMU buffer is filled 
this prevents a vulnerability where the initial IMU data is processed
26 times (where 26 is the IMU buffer length)
 2017-12-12 11:39:38 +11:00
Andrew Tridgell
1f9a3dd1bd AP_AHRS: improved init attitdue in DCM 
this tries harder to get a good IMU sample for the initial attitude
estimate. I have seen cases of bad IMU data on startup and this makes it
much less likely
 2017-12-12 11:39:38 +11:00
Andrew Tridgell
97729a12f0 AP_NavEKF2: don't run IMU updates until buffer fills 
this prevents us using bad initial data multiple times. It fixes a bug
where the IMU may pause during EK2 initialisation
 2017-12-12 11:39:38 +11:00
Andrew Tridgell
39c206ca03 AP_InertialSensor: limit delta-time from INS 
limit delta-time to 2x average time

DEBUG CODE - DO NOT MERGE
 2017-12-12 11:39:38 +11:00
Andrew Tridgell
a0af4af5b5 AP_InertialSensor: debugging code for EK2 bug 2017-12-12 11:39:38 +11:00
Randy Mackay
38145f9541 AP_InertialSensor: fix param docs for notch and log settings 2017-12-12 07:59:41 +09:00
Randy Mackay
cabced82f1 AR_AttitudeControl: fix parameter descriptions 2017-12-11 17:01:18 +09:00
Michael Oborne
78f732c380 AR_AttitudeControl: fix parameter docs 2017-12-11 08:35:33 +09:00
Randy Mackay
744f4baf22 AR_AttitudeControl: add parameter description increment 2017-12-09 16:23:25 +09:00
Randy Mackay
f00f4ce79b AR_AttitudeControl: fix get_desired_speed timeout 2017-12-09 16:23:22 +09:00
Randy Mackay
9b81c133f6 AP_HAL_PX4: fix compiler warning in UARTDriver 2017-12-09 12:18:49 +09:00
Randy Mackay
36c5f057ae AR_AttitudeControl: add get_desired_turn_rate lat_accel and speed 
for reporting use only
 2017-12-09 12:18:49 +09:00
Andrew Tridgell
30944f60e6 AP_SBusOut: fixed param doc name 2017-12-09 08:31:24 +11:00
Andrew Tridgell
051f30990c SRV_channel: fixed doc names of VOLZ and SBUS 
thanks to Mark for noticing
 2017-12-09 08:08:00 +11:00
Peter Barker
c4734484e7 AC_Avoid: take an AP_AHRS in place of an AP_AHRS_NavEKF 2017-12-08 11:27:37 +09:00
Peter Barker
8a4ab685c7 AP_AHRS: implement get_hgt_ctrl_limit on base class 
If no limits are required false can be returned, so an trivial
implementation is possible
 2017-12-08 11:27:37 +09:00
Peter Barker
89e12163cd AP_AHRS: correct comment 2017-12-08 11:27:37 +09:00
Peter Barker
c3eff57f60 AP_InertialNav: remove unused get_hgt_ctrl_limit 2017-12-08 11:27:37 +09:00
Peter Barker
a1c982be4a AC_Avoid: work in metres to avoid extra work 2017-12-08 11:27:37 +09:00
Peter Barker
0fe45ef6b6 AC_Avoid: eliminate get_position and get_alt_above_home 2017-12-08 11:27:37 +09:00
Peter Barker
54010451bf AC_Avoid: check result of AHRS calls 
Work in metres to avoid computation
 2017-12-08 11:27:37 +09:00
khancyr
b44ba29a05 AC_Avoidance: replace AP_InertialNav by AHRS 2017-12-08 11:27:37 +09:00
Andrew Tridgell
4289190654 HAL_PX4: added LIS3MDL on FMUv4 2017-12-08 09:49:25 +11:00
Mark Whitehorn
b0e2f06a7a AP_Compass: add LIS3MDL probe for Pixracer 2017-12-08 09:49:25 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas
9b2e48ce10 AP_GPS: Improve comments (NFC) 2017-12-05 10:44:58 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
fa4427fbce AC_AttitudeControl: Add AC_PosControl::get_bearing_to_target() method 2017-12-05 09:17:15 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
1a512609ac AC_WPNav: Use the get_bearing_cd() overloaded function provided by AP_Math instead 2017-12-05 08:54:49 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
e13281ab2d AP_Math: add overloaded functions get_horizontal_distance_cm() and get_bearing_cd() (NFC) 2017-12-05 08:54:49 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
07c8d208bc AC_WPNav: Use DEGX100 define instead of hardcoded value (NFC) 2017-12-05 08:54:49 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
ec1790dad9 AP_Math: Use DEGX100 define instead of hardcoded value (NFC) 2017-12-05 08:54:49 +09:00
Guglie
4eaa1f17df SITL: fix pthread_setname_np to build on mac 2017-12-04 21:14:29 +11:00
Tom Pittenger
da11241aa8 AP_HAL_SITL: add const 2017-12-02 09:17:27 +09:00
Patrick José Pereira
bd1110f444 AP_JSButton: simplifies logic 
Less code make people happy

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2017-12-01 14:50:15 -08:00
Peter Barker
e39e8359b6 GCS_MAVLink: tighten result of handle_preflight_reboot 2017-12-01 17:01:10 +00:00
Peter Barker
161e2145cb AP_InertialSensor: tighten type of simple_accel_cal result 2017-12-01 17:01:10 +00:00
Randy Mackay
82cd320bd0 AP_AHRS: add get_origin method to parent 2017-12-01 09:28:56 +09:00
Andrew Tridgell
da4d3ebe2b HAL_SITL: fixed UART utils for cygwin and Linux 2017-12-01 08:02:48 +11:00
Tom Pittenger
6bdbe53024 AP_HAL_SITL: fix compile error for Windows/Cygwin builds 
termios2 not available on cygwin. This needs a re-think for cygwin. For now let's just hide it by letting it be declared empty by the virtual and totally bypass it in the cygwin build.
 2017-11-30 12:17:49 -08:00
Tom Pittenger
013035a4da AP_HAL_SITL: fix compile error for Windows/Cygwin builds 
Can not find "asm/termios.h"
 2017-11-30 12:05:56 -08:00
Tom Pittenger
760c6185e5 AP_HAL_SITL: remove SBUS debug code 2017-11-30 12:03:17 -08:00
Pierre Kancir
c30642a348 AP_HAL_SITL: correct _unbuffered_writes usage 2017-11-30 10:36:54 -08:00
Mark Whitehorn
b1b1c0218f AP_HAL_PX4: clean whitespace 2017-11-30 10:20:04 +11:00
Mark Whitehorn
d9ce90ceb0 AP_SBusOut: fix typo in comment 2017-11-30 10:20:04 +11:00
Mark Whitehorn
8d70255b8b AP_SBusOut: turn off SBUS_DEBUG 2017-11-30 10:20:04 +11:00
Mark Whitehorn
5a417e3152 AP_HAL_SITL: support SBusOut 
add uart config methods
 2017-11-30 10:20:04 +11:00
Mark Whitehorn
644f5b75e6 AP_HAL_VRBRAIN: rename enable_sbus_out to enable_px4io_sbus_out 2017-11-30 10:20:04 +11:00
Mark Whitehorn
12ea8efa84 AP_HAL_PX4: support SBusOut 
add unbuffered writes and uart config
 2017-11-30 10:20:04 +11:00
Mark Whitehorn
66c4b7d986 AP_HAL: support SBusOut 
rename enable_sbus_out to enable_px4io_sbus_out
 2017-11-30 10:20:04 +11:00
Mark Whitehorn
3587d7f253 AP_SerialManager: add SBUS1 serial output support 2017-11-30 10:20:04 +11:00
Mark Whitehorn
cca251c135 SRV_Channel: support SBusOut 2017-11-30 10:20:04 +11:00
Mark Whitehorn
94d4f068a8 AP_SBusOut: create library 2017-11-30 10:20:04 +11:00
Mark Whitehorn
560402bad4 AP_BoardConfig: clarify PX4IO SBUS enable message 2017-11-30 10:20:04 +11:00
Peter Barker
47f8ed7fab AP_GPS: set GPS_SAVE_CFG default to save GPS config as required 2017-11-29 00:58:43 -07:00
Andrew Tridgell
9677d570e9 AP_GPS: faster GPS lock 
use 9600 and 115200 first
 2017-11-29 00:58:43 -07:00
Andrew Tridgell
2c6593e35e AP_NavEKF3: fixed inverted function setInhibitGpsVertVelUse() 2017-11-29 09:47:14 +09:00
Andrew Tridgell
4019a167a9 AP_NavEKF2: fixed inverted function setInhibitGpsVertVelUse() 2017-11-29 09:47:14 +09:00
Grant Morphett
f7db538220 APM_Control: Fixed the subparam indexs to start at 1 
AFAIK there is still a bug in ArduPilot where subparams should not start at index 0.  This is due to the way the index math and bit shifing works as it incorrectly offsets all 0 index params to 0. We allow 2 levels of sub params - 3 levels in total.  So params, sub params and sub sub params.  The 0 parameter in all those is unfortunately always references param[0].  So param[0] and subparam[0] and subsubparam[0] will reference the same parameter value.  Its why we always say start the index from 1 as the math and bitshifting then works correctly.

Yeah this is worded badly - hard to explain.
 2017-11-29 09:43:10 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
5a0ffe94d2 AP_Common: NFC spell in comments 2017-11-27 23:13:34 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
0ecb14361d AP_AHRS: NFC spell in comments 2017-11-27 23:13:34 +09:00
Randy Mackay
b9a1621d38 AR_AttitudeControl: minor comment fix 
non-functional change
 2017-11-27 10:35:26 +09:00
Peter Barker
30355fa6d8 AP_Mission: provide short description for mission item types 2017-11-27 10:28:24 +09:00
Andrew Tridgell
9660973975 AP_Math: make crc_crc8 const 2017-11-27 10:15:07 +09:00
Leonard Hall
bd284d9fd7 AC_PosControl: correct lean-angle-to-accel formula 
Thanks to @luweikxy for finding this issue!
 2017-11-24 09:12:00 +09:00
Leonard Hall
e49d29f8cd AC_WPNav: protect against divide by zero 
This could occur if the spline origin and destination were the same location
In these cases we mark the vehicle as having reached the destination avoid all calculations
 2017-11-23 21:24:28 +09:00
Andrew Tridgell
917d9842c4 SITL: support AHRS_ORIENTATION in SITL 
this allows for tailsitters in RealFlight
 2017-11-23 14:26:11 +11:00
Andrew Tridgell
ebcffcb0ac HAL_SITL: fixed console printf in SITL examples 2017-11-23 14:26:11 +11:00
Andrew Tridgell
3f226cd2b9 AP_Math: added from_rotation() method to Matrix3 
this is used to get a rotation matrix from a rotation enum
 2017-11-23 14:26:11 +11:00
Peter Barker
22f1b5ed6f TECS: support for units on fields 2017-11-23 10:40:30 +11:00
Peter Barker
d68ba874d0 DataFlash: correct examples with units 2017-11-23 10:40:30 +11:00
Peter Barker
b19f981c07 DataFlash: validate units and multipliers 2017-11-23 10:40:30 +11:00
Peter Barker
9896e23c36 DataFlash: Log_Write() fills unknown units with '?' 2017-11-23 10:40:30 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas
2e94673e4f DataFlash: keep the unit names consistent with Tools/autotest/param_metadata/param.py:33 2017-11-23 10:40:30 +11:00
Peter Barker
a5442fb293 DataFlash: support for units on fields 2017-11-23 10:40:30 +11:00
Peter Barker
1e512338f9 AP_AirSpeed: clarify comment 2017-11-23 10:40:30 +11:00
Jacob Walser
46ac0e45aa AP_HAL_SITL: initialize rc inputs appropriately for ArduSub 2017-11-22 15:43:46 -05:00
Patrick José Pereira
28ff272017 SIM_Submarine: Solve problem when frame is above water level 
Fix bluerobotics/ardusub/issues/128

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
Co-Authored-By: jaxxzer <jwalser90@gmail.com>
 2017-11-22 12:38:14 -08:00
HeBin
c056076e85 AP_InertialSensor: fix code style problem, delete useless codes 2017-11-22 10:20:00 -08:00
HeBin
1918b07705 AP_Notify: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
HeBin
efbb030494 AP_InertialSensor: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
HeBin
0e1ce2a7fd AP_HAL_Linux: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
HeBin
895b5f34b8 AP_HAL: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
HeBin
26de6de848 AP_Compass: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
Chinese66
700aaf2e8f AP_HAL: add delay to UART_test example 
For AC3.5 and higher version, serial uartA-USBconsole cannot work. Maybe the code before "setup" has been changed. Ensure that the uartA can be initialized
 2017-11-22 09:05:17 +09:00
Michael du Breuil
983a330cd5 AC_Fence: Remove unused duplicate methods 
The Vector2l methods completely duplicate the code of the Vector2f
methods, but aren't used anywhere. They are therefore subject to bitrot
and aren't adding any value. (Also shrinks the build by 8 bytes for some
reason, given that it's unused code I expected to see no difference in
binary size).
 2017-11-21 17:04:11 +09:00
Andrew Tridgell
e0d383c986 AP_Volz_Protocol: add a 30% safety margin over baudrate 
we don't want to fill the buffer if we don't get full uart utilisation
 2017-11-21 14:10:54 +11:00
Guy Tzoler
7f68be9bdf SRV_Channel: adding Volz Support 2017-11-21 14:10:54 +11:00
Guy Tzoler
2442f3fb06 AP_SerialManager: adding Volz Support 
and make AP_SerialManager a singleton
 2017-11-21 14:10:54 +11:00
Guy Tzoler
65032919e2 AP_Volz_Protocol: added Volz protocol library 2017-11-21 14:10:54 +11:00
Samuel Tabor
05492be269 AP_AHRS: clarify scope of AHRS_GPS_USE parameter 2017-11-20 13:53:36 +09:00
Samuel Tabor
1b4705242c AP_NavEKF2: print reason for EKF2 arming failure when no GPS is available 2017-11-20 13:53:31 +09:00
Michael du Breuil
012ddbefac AP_Landing: Support absolute altitude deepstalls 2017-11-19 16:48:17 +01:00
Andrew Tridgell
964d64a623 SITL: adjust FlightAxis defaults 
and map 0,0 to CMAC location, to improve how SITL works in
MissionPlanner
 2017-11-19 18:24:08 +11:00
Andrew Tridgell
cdd350f93e SITL: fixed build under cygwin 2017-11-18 21:23:15 +11:00
Georgii Staroselskii
a18cf45798 AP_Notify: enable AP_BoardLED for Navio 2017-11-17 09:20:55 -08:00
Georgii Staroselskii
6326e23682 AP_HAL: Navio: add defs for BoardLED 2017-11-17 09:20:55 -08:00
Georgii Staroselskii
56534b34c5 AP_HAL_Linux: use GPIO_Sysfs for Navio 
/boot/config.txt: dtoverlay=navio-rgb should be disabled for this thing
to work, though.
 2017-11-17 09:20:55 -08:00
Georgii Staroselskii
4e02637f23 AP_Notify: add Led_Sysfs and use in Navio2 
Navio2 exports its leds via /sys/class/leds interface. We reuse it in
order not to conflict with GPIO_Sysfs. Otherwise we'd get a Device Busy
error in GPIO_Sysfs::_export_pin().
 2017-11-17 09:20:53 -08:00
Georgii Staroselskii
5254ee03c2 AP_HAL_Linux: use GPIO_Sysfs for Edge 2017-11-17 09:18:36 -08:00
Georgii Staroselskii
8fcd30c611 AP_HAL_Linux: use GPIO_Sysfs for Navio 2 2017-11-17 09:18:35 -08:00
Peter Barker
fd543fce6d AP_Scheduler: create AP::PerfInfo class 2017-11-16 15:31:53 +00:00
Peter Barker
5c2f68e8f5 Copter+AP_Scheduler: move perf_info.cpp into Scheduler 2017-11-16 15:31:53 +00:00
Peter Barker
b97ee33438 DataFlash: AP_Camera functions use GPS singleton 2017-11-16 15:28:37 +00:00
Peter Barker
7258fa81d9 AP_Camera: use GPS singleton 2017-11-16 15:28:37 +00:00
Leonard Hall
ebd864d2d2 AC_PosControl: minor update to comments 2017-11-16 09:46:28 +09:00
Peter Barker
269294754f GCS_MAVLink: use gps singleton 2017-11-15 13:43:03 +00:00
Peter Barker
a8aa6a7822 AP_Arming: use gps singleton 2017-11-15 13:43:03 +00:00
Peter Barker
693823ae0d AP_GPS: add gps() to AP:: namespace 2017-11-15 13:43:03 +00:00
Randy Mackay
6315e6eb45 AC_AttitudeControl: remove unused get_tilt_limit_rad 2017-11-15 20:22:02 +09:00
DOMINATOR\Eugene
4c6f954cdf AP_BoardConfig: separation of parameter groups 2017-11-15 09:52:43 +11:00
André Kjellstrup
1a63fd85d8 AP_Camera: Option to trig by distance only when in AUTO mode 2017-11-14 00:10:22 +00:00
khancyr
4413ebab7b AP_HAL_SITL: suppress output until initialization is finished 2017-11-13 10:52:38 +11:00
Jacob Walser
07fa65a88c AP_HAL_SITL: Add current and voltage monitoring implementation for Sub 2017-11-13 10:50:27 +11:00
khancyr
2a25011b14 AR_AttitudeControl: const local variables 2017-11-09 09:53:12 +09:00
Peter Barker
23882aaab0 AP_Notify: only play not-ready-or-not-finished tone if we've been ready 2017-11-08 19:08:23 +09:00
Peter Barker
25a0e6378e AP_Arming: manual transmitter checks call rc calibration checks 2017-11-08 19:07:57 +09:00
Peter Barker
49dd5f4f80 Copter: prearm board voltage checks are called in parent class 2017-11-08 19:07:53 +09:00
Peter Barker
30c1a040d7 Copter: prearm baro checks are called in parent class 2017-11-08 19:07:44 +09:00
Peter Barker
901fe55d04 AP_Notify: play sad tone if prearm checks start to fail 2017-11-08 19:02:44 +09:00
khancyr
76a6649a2d AP_Autotune: remove unimplemented function 2017-11-08 17:21:56 +09:00
khancyr
e9e1dac188 AR_AttitudeControl: remove unused skid_steering arg from get_throttle_out 2017-11-08 15:45:35 +09:00
khancyr
aa09541847 AR_AttitudeControl: const ahrs reference 2017-11-08 15:34:41 +09:00
khancyr
d226ffeeb2 AP_AttitudeControl: remove tabs 
non-functional change
 2017-11-08 15:06:25 +09:00
Daniel Widmann
49887235df AR_AttitudeControl: get_steering_out methods accept reverse argument 2017-11-08 14:36:23 +09:00
bnsgeyer
63bafa2c7f AP_Motors: Tradheli- fixes servo_test function for Dual Heli frame 2017-11-08 11:07:08 +09:00
proficnc
6a94d285de AP_BoardConfig: fixed description to warn against 
setting the wrong heater value in params
 2017-11-07 12:00:32 +11:00
Michael du Breuil
ef0b52e017 AP_Arming: Run extra GPS checks when arming 2017-11-06 01:33:57 +00:00
Michael du Breuil
236e74c529 AP_GPS: Singleton 2017-11-06 01:33:57 +00:00
Michael du Breuil
c856cc6f33 AP_GPS: Allow GPS's to run functions on arming (used by SBF) 
Supports starting/stopping GPS logging
 2017-11-06 01:33:57 +00:00
Andrew Tridgell
c9652fec3c AP_BattMonitor: fixed SITL segfault 2017-11-04 19:41:41 +11:00
Andrew Tridgell
274e441292 DataFlash: fixed build for aerofc-v1 2017-11-04 16:53:29 +11:00
Andrew Tridgell
6358081b18 AP_Motors: apply tailsitter min spin to both motors 2017-11-04 11:41:40 +11:00
Michael du Breuil
338d745de1 AP_Landing: Implement is_on_approach for deepstall 
(Fixes a disarm in flight)
 2017-11-04 10:07:16 +11:00
Andrew Tridgell
878d2e2563 AP_Motors: fixed tailsitter use of SPIN_MIN 2017-11-04 09:29:08 +11:00
alexshirley
8058fdf093 AP_HAL_Linux: combine ppm and sbus on ocpoc_zynq 
Removes compile-time selection of RCInput driver for ocpoc_zynq.
PPM and SBUS input are now colocated on the ocpoc board, and it
only needs to run RCInput_ZYNQ. Pulse input is also inverted
to accommodate SBUS input, which has no effect on PPM input.
 2017-11-01 10:28:40 -07:00
alexshirley
065b00eb81 AP_HAL: Remove SBUS macro from ocpoc target 2017-11-01 10:28:40 -07:00
Randy Mackay
002d3f08f6 AP_L1_Control: update_waypoint zeros xtrack i term on init 2017-11-01 16:46:40 +09:00