Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
21,159 Commits 70 Branches 507 Tags 659 MiB
Commit Graph

21159 Commits

Author SHA1 Message Date
Leonard Hall f221d4d757 Copter: auto sets desired spool state 2016-04-01 11:59:30 +09:00
Leonard Hall 70433d25e3 Copter: althold uses 0 to 1 throttle range and spool logic 
stabilizes even while landed
sets desired motor spool state
check for spool up before takeoff
 2016-04-01 11:59:30 +09:00
Leonard Hall 2180514dde Copter: acro uses 0 to 1 throttle and sets desired spool state 2016-04-01 11:59:30 +09:00
Leonard Hall f56ff4d564 Copter: stabilize uses 0 to 1 throttle and sets motor spool state 2016-04-01 11:59:30 +09:00
Leonard Hall 76a8de8a53 Copter: CTUN logs throttle_in, angle boost in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 7bcdc76655 Copter: get_pilot_desired_climb_rate accepts control_in as 0 to 1000 
Previously the input was expected to be throttle_min (i.e. 130) to 1000
 2016-04-01 11:59:30 +09:00
Leonard Hall 20debc962a Copter: update get_throttle_pre_takeoff for 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 37e6977813 Copter: update get_non_takeoff_throttle for 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 74983669be Copter: set_accel_throttle_I_from_pilot_throttle uses 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall c3403a128c Copter: throttle passed to compass in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall a44f7f650b Copter: throttle sent to GCS uses 0 to 1 range 
This is probably not correct because we should be sending the throttle as a 0 to 1 number using the full possible output range.  This uses the reduced range passed in when the copter is being stabilized (i.e. between throttle-min and throttle-max)
 2016-04-01 11:59:30 +09:00
Leonard Hall f8d7b677d4 Copter: update_thr_average uses 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall fd2509f6ed Copter: get_pilot_desired_throttle outputs in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall e132ea34d9 Copter: g.rc_3.control_in range 0 to 1000 
Previously the range was throttle_min (normally 130) to 1000 but we can remove this awkward range and use 0 to 1000 now that the attitude controller and motor library inputs are in the 0 to 1 range.
 2016-04-01 11:59:30 +09:00
Leonard Hall a00a9601a4 Copter: AP_MotorsCoax now uses 4 servos 2016-04-01 11:59:30 +09:00
Leonard Hall 1174ad3e66 AC_InputManager_Heli: get_pilot_desired_throttle in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall d312e52aee AC_InputManager: add f for float constants 2016-04-01 11:59:30 +09:00
Leonard Hall c64a505906 AC_PosControl: relax_alt_hold_controllers accepts throttle in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 15be80a25d AC_PosControl: accel_to_throttle outputs 0 to 1 2016-04-01 11:59:30 +09:00
Leonard Hall e5d6d45851 AC_AttControl_Heli: angle_boost to float 2016-04-01 11:59:30 +09:00
Leonard Hall 2822b93cd4 AC_AttControl: add get_throttle_in accessor 
Used for logging only
 2016-04-01 11:59:30 +09:00
Leonard Hall c0f209fa42 AC_AttControl: angle_boost to float 2016-04-01 11:59:30 +09:00
Leonard Hall 6f29bbafb4 AC_AttControl_Multi: get_althold_lean_angle_max uses motor thrust in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 24f975c16a AC_AttControl_Multi: fix throttle boost for 0 to 1 2016-04-01 11:59:30 +09:00
Leonard Hall bab08cbcc1 AC_AttControl_Multi: add divide by zero check 2016-04-01 11:59:30 +09:00
Leonard Hall a0409e4f9e TradHeli: dynamic flight check uses throttle in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall d2a1cdf906 MotorsHeli: replace throttle_control_input with throttle_in 
throttle_control_input was 0 to 1000 range, throttle_in is 0 to 1
 2016-04-01 11:59:30 +09:00
Leonard Hall f02e8f8e01 AP_MotorsHeli: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 5cd4b78918 AP_MotorsSingle: remove reverse parameters 
No longer necessary because we can use individual servo reverse params
 2016-04-01 11:59:30 +09:00
Leonard Hall 6264159f4d AP_MotorsSingle: move servo objects into Single class 2016-04-01 11:59:30 +09:00
Leonard Hall 21d304b86d AP_MotorsSingle: output_to_motors implements spool logic 2016-04-01 11:59:30 +09:00
Leonard Hall 24a100e429 AP_MotorsSingle: stability patch uses 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall cffdced838 AP_MotorsSingle: support 4 servo outputs 2016-04-01 11:59:30 +09:00
Leonard Hall f53d6e95e8 AP_MotorsSingle: rename _rev_roll to _roll_reverse 
Also rename _rev_pitch to _pitch_reverse and _rev_yaw to _yaw_reverse
 2016-04-01 11:59:30 +09:00
Leonard Hall 4db73d86af AP_MotorsSingle: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall 46ab198ebc AP_MotorsSingle: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 40c18891cf AP_MotorsCoax: remove reverse parameters 
No longer necessary because we can use individual servo reverse params
 2016-04-01 11:59:30 +09:00
Leonard Hall 260006dcb3 AP_MotorsCoax: move servo objects into Coax class 2016-04-01 11:59:30 +09:00
Leonard Hall 110d41ee24 AP_MotorsCoax: fix SV_SPEED param description 2016-04-01 11:59:30 +09:00
Leonard Hall 8d8f52b22f AP_MotorsCoax: output_to_motors implements spool logic 2016-04-01 11:59:30 +09:00
Leonard Hall b85c20bb65 AP_MotorsCoax: stability patch in 0 to 1 range 
Also removes setting of limits in stability patch
sets outputs for additional 2 servos
 2016-04-01 11:59:30 +09:00
Leonard Hall 7df9b2eb8c AP_MotorsCoax: support 4 servo outputs 2016-04-01 11:59:30 +09:00
Leonard Hall 7d6c6b5556 AP_MotorsCoax: rename _rev_roll to _roll_reverse 
Also rename _rev_pitch to _pitch_reverse and _rev_yaw to _yaw_reverse
 2016-04-01 11:59:30 +09:00
Leonard Hall 5cb44901ff AP_MotorsCoax: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall 3df52aad5f AP_MotorsCoax: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 45a16d6dad AP_MotorsTri: implement output_to_motors for spool logic 2016-04-01 11:59:30 +09:00
Leonard Hall d0a7579fa0 AP_MotorsTri: stability patch in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 80f77bc30b AP_MotorsTri: output_min does not set limits 2016-04-01 11:59:30 +09:00
Leonard Hall ba659be5cb AP_MotorsTri: rename _yaw_servo_reverse to _yaw_reverse 2016-04-01 11:59:30 +09:00
Leonard Hall 8c4d6d6fbe AP_MotorsTri: remove output_disarmed 2016-04-01 11:59:30 +09:00