karthik.desai
afc382c342
Copter: moved beacon logging to dataflash
2017-04-22 10:55:08 +09:00
Randy Mackay
8140353c64
Copter: log event when primary GPS changes
2017-03-13 11:31:51 +11:00
Peter Barker
b7f982d7ce
Copter: support for arming and disarming using an auxsw
2017-02-06 16:48:50 +09:00
Andrew Tridgell
e85df47b06
Copter: fixed parameter handling for pointer objects
...
fixed loading of default files and use of POINTER flag on object
groups
2017-01-12 17:39:37 +11:00
Randy Mackay
38478638de
Copter: aux switch for enable/disable proximity based avoidance
2016-12-20 19:48:02 +09:00
Peter Barker
289aba4350
Copter: support for NAV_CMD_PLACE
2016-12-02 12:52:53 +11:00
Randy Mackay
74c9c4aa9d
Copter: add beacon data flash logging
...
Added to Copter vehicle because currently only used by Copter
2016-11-30 17:56:59 +09:00
Peter Barker
e72f5a6240
ArduCopter: enable/disable precision loiter on a switch
...
A switch MUST be assigned for precision loiter to be enabled
2016-11-18 09:41:56 +09:00
Peter Barker
236b8ab6b7
Copter: make EPM a subclass of AP_Gripper_Backend
2016-11-05 10:20:39 +09:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Randy Mackay
a07ecfe2b3
Copter: log proximity sensor at 10hz
...
This is current in the Copter vehicle code but we can move to the dataflash library when other vehicles start using this type of sensor. Until then adding it to common will just increase the dependencies unnecessarily for other vehicles.
2016-10-13 20:21:07 +09:00
Randy Mackay
d74ae535d1
Copter: log EKF lane switch
2016-10-10 16:40:08 +09:00
Peter Barker
b81074d83a
Copter: simplify auxsw duplicates check
2016-09-23 18:12:19 +09:00
Andrew Tridgell
d0dd10aeea
Copter: added DEV_OPTIONS parameter
...
this is for little used options to allow standard firmware builds to
enable those options for development purposes
First option is for MAVLink based ADSB avoidance
2016-09-12 16:24:34 +10:00
Randy Mackay
e17c8ac851
Copter: remove non-working reset-to-armed-yaw
...
Arguably we should make this work, but until that happens we should not present the option on the auxiliary switches
2016-08-29 16:34:24 +09:00
floaledm
893614897e
Copter: moved MAV_TYPE to Copter.h
2016-08-25 10:16:20 +10:00
Andrew Tridgell
96de005591
Copter: moved MAV_TYPE define to defines.h
2016-08-25 10:16:20 +10:00
Randy Mackay
728e8f8f56
Copter: land_state uses enum
...
This resolves a Covarity warning related to initialisation (that was not really a problem) but it is better form anyway
2016-08-08 13:31:29 +09:00
Randy Mackay
88da5bd453
Copter: sport mode restructured to match althold and feedback from mid-stick
...
This modifies sport mode to be structured like althold and loiter flight modes so that ongoing maintenance of the modes is hopefully easier.
Also changes throttle feedback to occur from mid-stick
2016-08-05 12:40:37 +09:00
Leonard Hall
205bac91a1
Copter: loiter spin-up to throttle min (and remove a state)
2016-08-05 12:40:37 +09:00
Leonard Hall
d9deab9e8e
Copter: AltHold pilot feedback only spins up to min throttle
2016-08-05 12:40:37 +09:00
Randy Mackay
f4f13bbe6b
Copter: add throw mode logging
2016-08-02 20:25:52 +09:00
chambana
25940c8e0f
Copter: add THROW_TYPE and allow dropping vehicle to trigger motors
2016-08-02 20:25:52 +09:00
Randy Mackay
f0f87a2f0c
Copter: add throw_nextmode
...
vehicle switches to mode specified in THROW_NEXTMODE parameter after the
throw is completed.
2016-08-02 20:25:52 +09:00
Randy Mackay
64ac18da6c
Copter: move throw state into structure
...
This makes it easier to add more state which is required for the follow throw_nextmode change
2016-08-02 20:25:52 +09:00
Randy Mackay
1161417d7f
Copter: add GUIDED_NOGPS flight mode
...
This mode is a cut down version of Guided mode that only accepts attitude commands.
This mode does not require a GPS lock
2016-08-02 18:25:59 +09:00
Randy Mackay
d50987f976
Copter: avoidance_adsb implements copter avoidance using ADSB
2016-07-25 20:24:37 +09:00
Randy Mackay
b61ae1a4a1
Copter: log EKF yaw reset event
2016-06-24 18:12:30 +09:00
Randy Mackay
390d06a400
Copter: add and use FLIP_COMPLETE mode reason
...
No need to use the original reason we entered flip mode as the reason we are exiting flip. Instead we can use a new reason called FLIP_COMPLETE
2016-05-25 16:15:34 +09:00
Randy Mackay
e18bf3af56
Copter: remove unused definitions
2016-05-21 10:36:53 +09:00
Randy Mackay
7689315ba2
Copter: rename sonar to rangefinder
2016-05-21 10:36:53 +09:00
Randy Mackay
e0bf08abe0
Copter: fixes to guided mode target check is within fence
...
guided altitude targets are converted to alt-above-home
remove unnecessary fence_status local variable from guided_set_destination methods
log failures to set guided target under a new failure code: ERROR_CODE_DEST_OUTSIDE_FENCE (5)
rename pv_get_home_destination_distance_mc to pv_distance_to_home_cm
2016-05-21 09:56:12 +09:00
Jonathan Challinger
747344a8ba
Copter: add disarm on land detect option to PILOT_THR_BHV
2016-05-13 11:57:48 +09:00
Randy Mackay
cfb2a6b2f9
Copter: update brake-timeout to work with master
...
We added mode-change reasons since PR was submitted
2016-05-13 11:42:25 +09:00
Andrew Tridgell
111eb2ccc1
Copter: use DataFlash::log_while_disarmed()
2016-05-09 12:05:52 +10:00
Randy Mackay
2eb0484142
Copter: rename Loiter states and swap order within select statement
2016-05-07 10:08:34 +09:00
Randy Mackay
9c12b64ba5
Copter: rename AltHold states and swap order within select statement
...
No functional change
2016-05-07 10:08:30 +09:00
Randy Mackay
3d31c3b936
Copter: log error if circle does not initialise correctly
2016-04-30 10:33:01 +09:00
Randy Mackay
43d14defd4
Copter: RTL handles terrain data failure
2016-04-30 10:33:01 +09:00
Randy Mackay
47658fe964
Copter: add terrain failsafe
2016-04-30 10:33:01 +09:00
Randy Mackay
2134e8bfb9
Copter: add terrain and navigation dataflash error codes
2016-04-30 10:33:01 +09:00
Andrew Tridgell
f32b7684a0
Copter: removed unused startup log message
2016-04-21 17:05:17 +10:00
Jonathan Challinger
1356deab8b
Copter: add control_mode_reason
2016-04-14 12:24:04 +09:00
Jonathan Challinger
6b5ba86f21
Copter: simplify GCS failsafe
2016-04-14 12:24:04 +09:00
Jonathan Challinger
a0ce8af633
Copter: use enum type for control_mode
2016-04-14 12:24:04 +09:00
Andrew Tridgell
31000ac756
Copter: moved Log_Write_Rate() to common code
2016-03-25 12:13:59 +11:00
Lucas De Marchi
e88ba38595
ArduCopter: replace header guard with pragma once
2016-03-16 18:40:44 +11:00
Randy Mackay
a93a0d370a
Copter: add throw mode to aux switches
2016-03-03 15:30:03 +09:00
Paul Riseborough
a7b69366a1
Copter: Add flight mode for throw launch
...
The is commit adds a new flight mode called 'Throw' to Copter that enables the copter to be thrown into the air to start motors. This mode can only be netered when the copters EKF has a valid position estimate and goes through the following states
Throw_Disarmed - The copter is disarmed and motors are off.
Throw_Detecting - The copter is armed, but motors will not spin unless THROW_MOT_START has been set to 1. The copter is waiting to detect the throw. A throw with an upwards velocity of at least 50cm/s is required to trigger the detector.
Throw_Uprighting - The throw has been detected and the copter is being uprighted with 50% throttle to maximise control authority. This state transitions when the copter is within 30 degrees of level.
Throw_HgtStabilise - The copter is kept level and height is stabilised about the target height which is 3m above the height at which the throw release was detected. This state transitions when the height is no more than 0.5m below the demanded height.
Throw_PosHold - The horizontal motion is arrested and the copter is kept at a constant position and height.
2016-03-03 12:18:13 +09:00
Andrew Tridgell
4efb9bd785
ArduCopter: update for changed AP_Camera API
2016-01-29 09:19:43 +11:00