Commit Graph

43 Commits

Author SHA1 Message Date
bnsgeyer dec8c5de77 AP_Motors: convert heli code to use SRV_Channels
this converts the heli code to use the SRV_Channels output
functions. It does not change behaviour, but removes the last vehicle
type that did its own servo output calculations.  This change also
fixed servo initialization conflicts.

Note that this also allows helis to be setup with more than one
channel for a particular output (eg. two separate channels for tail
servo if they are wanted). This isn't likely to be used much, but does
make heli consistent with other vehicle types
2018-07-16 12:41:16 +10:00
Jacob Walser abcb845af5 AP_Motors: refactor output_test -> output_test_seq 2018-07-02 11:31:58 -04:00
Jacob Walser 9ce9f95692 AP_Motors: make output_test signatures consistent and ensure override
specifier on derived classes
2018-07-02 11:31:58 -04:00
ChristopherOlson 9aa685a6d8 AP_Motors:TradHeli - single rotor only - add support for H3-140 swashplates.
Also changes the old definition to H3 for swashplates with fixed control radius and adjustable servo position.
2018-04-18 14:24:59 +09:00
ChristopherOlson f073c58f68 AP_Motors:TradHeli - add support for reverse collective swashplates 2018-04-18 14:24:59 +09:00
ChristopherOlson 96793a3ae7 AP_Motors:TradHeli - DDVP Ramp/Runup
Change to ramp and runup DDVP tail rotor to prevent torque pitching the frame and provide runup in sync with main
rotor like a mechanically driven tail.

Fix some comments and remove indents found in whitespace in AP_MotorsHeli.cpp and AP_MotorsHeli.h
2018-03-14 09:18:07 +09:00
Andrew Tridgell 03e1f6967f AP_Motors: removed enable() API
all output channels are already enabled by SRC_Channels::enable_aux_servos()
2017-10-22 15:52:50 +11:00
Andrew Tridgell 1ad5e1db4e AP_Motors: integrate AP_MotorsHeli_Dual
fixed issues with combining with Heli_Single
2017-03-25 16:22:10 +11:00
Andrew Tridgell 638f1364be AP_Motors: adapt to new RC_Channel API 2017-01-12 17:39:37 +11:00
Randy Mackay 2da7ea746b MotorsHeli: minor formatting updates 2016-12-14 13:21:59 +09:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell 255bda9f9c AP_Motors: allow setting of loop rate
this allows for SCHED_LOOP_RATE in copter
2016-06-17 15:01:18 +10:00
Andrew Tridgell 4e5e301c4e AP_Motors: fixed servo constructor for heli 2016-05-26 16:41:06 +10:00
Randy Mackay c4b88aafef AP_MotorsHeli: swash and tail servo objects moved into class 2016-04-01 11:59:30 +09:00
Randy Mackay fe4733121d AP_MotorsHeli_Single: ext_gyro_gain in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 2cdc5da226 AP_MotorsHeli_Single: rotor speed functions in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 68945df45d AP_MotorsHeli_Single: write_aux uses 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay a63dba5b13 AP_MotorsHeli_Single: servo_test becomes protected 2016-04-01 11:59:30 +09:00
Randy Mackay cefd114964 AP_MotorsHeli_Single: remove unused accessors for tail_type, ext_gyro_gain, phase_angle 2016-04-01 11:59:30 +09:00
Randy Mackay f2fc39943e AP_MotorsHeli_Single: remove unused delta_phase_angle 2016-04-01 11:59:30 +09:00
Randy Mackay 381f538aca AP_HotorsHeli_Single: remove unused definition 2016-04-01 11:59:30 +09:00
Randy Mackay 71866be652 AP_MotorsHeliSingle: move_yaw in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay f6120b801b AP_MotorsHeliSingle: move_actuators in -1 to +1 range 2016-04-01 11:59:30 +09:00
Lucas De Marchi 7d9153feb8 AP_Motors: replace header guard with pragma once 2016-03-16 18:40:42 +11:00
Andrew Tridgell 79c90d37f6 AP_Motors: apply HELI_RSC output type if available 2016-01-04 16:14:09 +11:00
Robert Lefebvre 3a13db9333 AP_MotorsHeli: Add more parameter checks. 2015-12-07 14:51:42 +09:00
Andrew Tridgell 47b9f6598a AP_Motors: allow change to heli rotor speed controls while armed
this helps a lot with tuning for gas helis
2015-11-27 15:12:03 +09:00
Robert Lefebvre b89b0d7f9e AP_MotorsHeli_Single: Move Servo_Test static variables to be class members 2015-11-12 19:37:37 +09:00
Robert Lefebvre eeb544d098 AP_MotorsHeli: Create SV_MAN=5=Oscillate servo setup mode. 2015-11-12 19:37:33 +09:00
Randy Mackay ca942f39dd AP_Motors_Heli: remove unused allow_arming check 2015-10-27 09:14:40 +09:00
Andrew Tridgell 9da2b2b430 AP_Motors: added H_GYR_GAIN_ACRO 2015-09-25 12:30:33 +10:00
Randy Mackay e3ff4ed9c4 MotorsHeli: integrate RotorControlState 2015-08-31 11:43:59 +09:00
Robert Lefebvre 535da1d79a AP_MotorsHeli_Single: DDVPT to use it's own ramp and runup times 2015-08-31 11:43:51 +09:00
Robert Lefebvre 28318c4116 AP_MotorsHeli: Move Output functions into parent class 2015-08-31 11:43:50 +09:00
Robert Lefebvre 84102c3e3f AP_MotorsHeli: Rework how servo setup is done. 2015-08-31 11:43:49 +09:00
Robert Lefebvre b11600aebe AP_MotorsHeli: Move set_delta_phase_angle into _Single class 2015-08-31 11:43:47 +09:00
Robert Lefebvre f853979816 AP_MotorsHeli: run RSC Control function in Output Min function
Move Output_Min() function into Heli_Single class as it will eventually be overloaded by other helicopter class types.
2015-08-31 11:43:44 +09:00
Robert Lefebvre 315f0408ae AP_MotorsHeli: RSC controller to use speed ramp as simple float scalar 2015-08-31 11:27:52 +09:00
Robert Lefebvre 10b0be9e75 AP_MotorsHeli: Fully detail tradheli output functions and move manual servo handling 2015-08-31 11:27:39 +09:00
Robert Lefebvre 7dda0f651a AP_MotorsHeli: Rename tradheli servo objects for clarity 2015-08-31 11:27:38 +09:00
Robert Lefebvre 457d939e77 AP_MotorsHeli: Update includes so that it builds 2015-08-31 11:27:37 +09:00
Fredrik Hedberg 411947ea7c AP_Motors: Rename output_yaw to move_yaw in AP_MotorsHeli_Single. 2015-08-31 11:27:35 +09:00
Fredrik Hedberg 97e09fa9b0 AP_Motors: Move traditional helicopter controls into AP_MotorsHeli_Single.
Original commit by fhedberg, had to fix merge conflicts and now it appears I did the commit?
2015-08-31 11:27:31 +09:00