Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
6,872 Commits 70 Branches 507 Tags 662 MiB
Commit Graph

278 Commits

Author SHA1 Message Date
Robert Lefebvre bfade7d0ed Fixed that last commit 
#define Stupid_Mistake
 2012-10-18 16:50:42 -04:00
Robert Lefebvre 592f4040fd Changed RLT Yaw Mode for TradHeli. Also a few comment cleanups. 2012-10-18 16:39:05 -04:00
rmackay9 583f2e49a3 ArduCopter: integrated Leonard Hall's improved ACRO mode 2012-10-18 23:24:34 +09:00
rmackay9 7d7de976c3 ArduCopter: reduced optical flow's I and IMAX terms 2012-10-17 17:47:43 +09:00
LeonardTHall d7b7e1cefa New Yaw controller using rate feed forward and stabilize. 
Signed-off-by: LeonardTHall <LeonardTHall@gmail.com>
 2012-10-15 11:37:49 +09:00
rmackay9 ee5dab9647 ArduCopter: enable ACRO mode's AXIS_LOCK by default 2012-10-14 19:50:45 +09:00
rmackay9 997fe85880 ArduCopter: fixed acro mode 
Changes included:
Removing earth frame roll_rate_trim, pitch_rate_trim and yaw_rate_trim.
Switch ACRO mode to use YAW_ACRO instead of YAW_HOLD.
Changed YAW_ACRO to use stabilize yaw when axis_enabled.
Reset ACRO roll, pitch and yaw targets to current attitude when first entering ACRO.
 2012-10-14 17:47:46 +09:00
rmackay9 4a41a3d210 ArduCopter: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery voltage and current monitor 2012-10-13 18:40:46 +09:00
Robert Lefebvre dae81d2068 Added #define for Tilt_Compensation. 
Also added some detail to WP_Speed_Max parameter.
 2012-10-12 14:51:31 -04:00
rmackay9 03933df5b7 ArduCopter: set default rate roll and pitch I terms to 0.010, and rate yaw to 0.015 
Updated after discussing with Marco
 2012-10-11 17:25:01 +09:00
rmackay9 35fa50234f ArduCopter: move I terms from stabilize to rate controllers 2012-10-11 17:20:05 +09:00
rmackay9 af1d6a9b82 ArduCopter: reduce Stabilize Yaw P term to 4.5 2012-10-03 14:19:49 +09:00
rmackay9 ea4f256f8e ArduCopter: BATT_PIN parameter added to allow you to select which pin is used for voltage and current measurements 
To save a parameter, the current sensor pin is assumed to always be 1 higher than the voltage pin.
 2012-10-02 22:16:19 +09:00
rmackay9 95763e610b ArduCopter: allow DMP to run in parallel with DCM 
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
 2012-09-30 00:25:40 +09:00
rmackay9 41fbb19cf5 AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory 
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
 2012-09-28 19:21:59 +09:00
rmackay9 fff5d51694 ArduCopter: reduced Loiter Rate I to 0.04 (was 0.08) 2012-09-25 19:08:31 +09:00
rmackay9 a71aa21514 ArduCopter: increase default Loiter Rate P to 5.0 2012-09-25 12:19:44 +09:00
rmackay9 9e66b555cb ArduCopter: removed INSTANT_PWM from ArduCopter and AP_Motors library 2012-09-13 21:31:13 +09:00
rmackay9 42406c827a ArduCopter: added NUM_IMU_SAMPLES_FOR_XYZHZ definitions for MPU6000 and Oilpan to allow more syncing of the mainloop with the arrival of data from the IMU. 2012-09-10 11:37:48 +09:00
Craig Elder 274b2e2143 Arducopter: Release 2.7.2 2012-08-31 19:18:10 -07:00
Andrew Tridgell e8d928cca4 ACM: added TELEM_DELAY to ArduCopter 2012-08-30 09:03:01 +10:00
Craig Elder 4ad516c445 Arducopter: increased MAVLINK delay to 6s to reduce the chance of xBee bricking 
Arduplane:  increased MAVLINK delay to 6s to reduce the chance of xBee bricking
Ardurover:  increased MAVLINK delay to 6s to reduce the chance of xBee bricking
 2012-08-28 20:09:10 -07:00
rmackay9 2ad6dcb7c4 ArduCopter: increased Stabilize Roll and Pitch I term to 0.05 (was 0.01) based on feedback from Jason 2012-08-29 11:34:53 +09:00
rmackay9 b4b394e67e ArduCopter: reduced Rate Roll and Pitch PID values 
RATE_ROLL_P, RATE_PITCH_P reduced to 0.165 (was 0.185)
RATE_ROLL_D, RATE_PITCH_D reduced to 0.004 (was 0.008)
 2012-08-26 10:45:45 +09:00
uncrustify 429c41155c uncrustify ArduCopter/config.h 2012-08-21 19:19:50 -07:00
Andrew Tridgell 6d11940ada AHRS: removed Quaternion build support from APM/ACM/rover 2012-08-22 10:42:21 +10:00
rmackay9 1d32e03f61 ArduCopter: added ACCEL_ALT_HOLD and INERTIAL_NAV to config.h and commented out of APM_Config.h. 
Reduces possibility of difference between arduino ide compiled code and script built code (i.e. autotester, mission planner)
 2012-08-19 12:31:02 +09:00
Jason Short 3ee2fd3fb6 ACM: Config.h - added default for toy mixer 2012-08-16 15:40:28 -07:00
Jason Short 9a568385b0 ACM increase the minimum speed at WP 2012-08-10 10:01:40 -07:00
Jason Short 3e57f8afd8 ACM: config.h = updated default gains 
More yaw rate control
 2012-08-09 16:59:43 -07:00
Amilcar Lucas d34549f386 Add an optional second mount to ArduPlane and ArduCopter 2012-08-08 23:22:24 +02:00
Amilcar Lucas 9cc705939a Add a second mount instance 2012-08-08 23:07:25 +02:00
Amilcar Lucas aa3cc63b15 ArduCopter: Make the code fit in a 1280 chip again 
Even allows to control a camera/antenna mount, if the user explicitly wants to.
 2012-08-06 00:23:48 +02:00
Amilcar Lucas 0106c133cf Default CLI_SLIDER_ENABLED to DISABLED 
Chris asked for this on the mailing list
 2012-08-06 00:22:33 +02:00
Amilcar Lucas afd96025a7 ArduCopter: Save more space in APM1280 2012-08-05 23:05:52 +02:00
Amilcar Lucas d29f7023cc Merge from ArduPlane 2012-08-04 18:38:50 +02:00
rmackay9 77b1785bc6 ArduCopter: reduce stabilize roll, pitch and rate yaw IMAX values 2012-07-30 11:01:45 +09:00
rmackay9 014f5aae99 ArduCopter: added DMP_ENABLE #define and CH6 tuning value for AHRS_KP 2012-07-28 14:21:07 +09:00
Jason Short 96aabb7712 ACM: Lowered default Alt hold P 2012-07-21 16:45:00 -07:00
Jason Short 3b496ff229 Arducopter: Upped D rate to .005 by default 2012-07-19 22:35:21 -07:00
Jason Short 49c7579079 Arducopter: Config.h defaults adjustments 2012-07-19 17:48:48 -07:00
Jason Short 3401bd3583 Arducopter: Clarified units in comment 2012-07-19 09:49:13 -07:00
Jason Short dcf9f9dab1 Arducopter 
for rate altitude changes
 2012-07-18 22:57:10 -07:00
Andreas M. Antonopoulos a976a59c88 AP_Limits: Configuration defaults moved to config.h. Fixed AP_LIMITS==DISABLED handling. 2012-07-16 11:46:43 -07:00
rmackay9 36ecdff593 ArduCopter: removed unused config for CAM_ROLL_GAIN and CAM_ROLL_PITCH now in AP_Mount library) 2012-07-15 16:38:52 +09:00
Jason Short 7a5544051d Arducopter 
Lowered WP speed default to 500. 600 was quite high once the nav routines were fixed and quad could achieve that speed.
 2012-07-11 17:46:07 -07:00
Jason Short c04bff67de Arducopter: Config.h, default gain tweaks from flight tests. 2012-07-10 21:53:38 -07:00
Amilcar Lucas dfe0983e1e Merge the changes from APM_Camera branch into ArduCopter 
Conflicts:

	ArduCopter/Camera.pde
	ArduCopter/Parameters.pde
 2012-07-11 00:39:13 +02:00
Jason Short 038116f521 Airspeed patch: 
pre-calculated airspeed resistance pitches copter automatically to gain a certain speed allowing the speed controller to work off of a better set point - similar to Alt hold.
added param tilt_comp with a default of 54 which equals 19.5° of pitch to go 6m/s
upped Z and Y target speeds to int32_t for speed squared calculation
 2012-07-09 13:13:32 -07:00
Andrew Tridgell 60caaa4b04 MAVLink: remove MAVLink 0.9 protocol support 
this simplifies the code a lot. We're not going back to 1.0
 2012-07-05 13:00:46 +10:00
Adam M Rivera 6e93ab6af6 Parameters: Added flag for camera pitch/roll servos (continuous or regular) 2012-07-04 21:06:21 -05:00
Jason Short 37685756df Config.h: 
decreased alt hold_P to .4
removed RTL_AUTO_LAND default
increased alt hold I
 2012-07-03 17:37:37 -07:00
Jason Short 2d572461ec Config: increased WP distance to 2m but default, removed alt hold D: causing issues with APM1 noise. 2012-07-03 17:18:33 -07:00
Jason Short 8a08a74cc6 Config.h : shortening the landing time to 10s 2012-07-02 17:52:38 -07:00
Jason Short 8ab1acfb92 Config.h 
Removed Approach delay redundancy - using land timer instead
Removed Retro loiter mode param
 2012-07-01 13:40:11 -07:00
rmackay9 78fa903e17 ArduCopter: updated STABILIZE_ROLL_I to 0.01 (was 0.1) as instructed by Marco 2012-06-30 19:26:14 +09:00
Jason Short 4450d80ea3 Config.h: Optimizing Nav gains 2012-06-29 21:20:28 -07:00
Jason Short c76ac4543b Added user editable define for Super simple radius 2012-06-26 10:38:46 -07:00
Jason Short a0dc1f7ab1 Config.h : New Gains based on testing, new Crosstrack gain. from 1.0 to .2 because of new algorithm 2012-06-25 23:06:28 -07:00
Jason Short 7e0708ca36 Config.h - returned low to original 120 2012-06-20 15:22:35 -07:00
Jason Short 4f18e7f80b lowered minimum throttle 2012-06-20 08:47:47 -07:00
Jason Short 39a253a273 decreased I term based on the tests last weekend in high winds 2012-06-20 08:47:47 -07:00
rmackay9 65050775e1 ArduCopter: made Robert's new yaw method optional (off by default). 
Add this line to APM_Config.h to enable Robert's yaw
#define ALTERNATIVE_YAW_MODE ENABLED
 2012-06-13 21:50:16 +09:00
Jason Short ff0659535e Raised the Max throttle to 1000, min to 200. Worked good in SIM with Tridge's motor safety patch. 2012-06-12 13:58:49 -07:00
rmackay9 c6f1d93849 ArduCopter: updated standard loiter pids. 
Loiter_P (speed from distance to target) = 0.2 (was 0.35)
Loiter_Rate_P (lean angle from desired acceleration) = 2.4 (was 2.5)
Loiter_Rate_I = unchanged at 0.08
Loiter_Rate_D = 0.40 (was 0.45)
 2012-06-12 20:56:31 +09:00
Jason Short a9610a0761 Stabilization patches 
removed Angle error limit for stabilization
constricted Iterm to +- 5° error and limited the implementation to when the quad is +- 5° from center
doubled the output limit for Rate controller.
increased default Rate_P gain to .18 with matching Rate_D of .004
Tested in the SIM and in backyard. dramatically increases performance and quad no longer overshoots and flips when pushed hard.
 2012-06-05 16:41:44 -07:00
Michael Oborne a71ed6c5ce enable mavlink10 by default 2012-06-04 08:02:08 +08:00
Jason Short 9310d613e1 Lowered I term - causes oscillations in SIM 2012-05-29 12:43:01 -07:00
Jason Short 7f3e142fa8 Loiter Gains based on new SIM 2012-05-15 22:01:01 -07:00
Robert Lefebvre c8fb9a6635 More CopterLEDS changes. 
Merged CopterLEDS and Piezo functions to eliminate pin conflict on APM2.  Created new Parameter bit to turn piezo function on and off from MP. Moved GPS and Aux pin assignments to allow commonality between APM1 and 2.  Set LED_Mode parameter default to 9 in order to make CopterLEDS completely backwards compatible with old Motor LEDS and Piezo code.  Legacy users should see no difference.
 2012-05-15 12:00:21 -04:00
Robert Lefebvre a285e2779f CopterLEDS changes for APM2 2012-05-15 10:07:03 -04:00
Adam M Rivera 8e580729b7 config.h: Removed comment. 2012-04-23 00:16:41 -05:00
Adam M Rivera 97040a7b3a Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach 2012-04-23 00:03:37 -05:00
rmackay9 090f5aaa6f ArduCopter - config.h - set standard RC_SPEED to 125 for helicopter frame 2012-04-21 23:46:36 +09:00
rmackay9 919f004b27 ArduCopter - changed Optical Flow for APM2 to use A3 pin 2012-04-21 20:15:16 +09:00
Adam M Rivera c233defbe6 Merge branch 'retro-loiter' of https://code.google.com/r/a432511-wip into auto-approach 
Conflicts:
	Tools/ArdupilotMegaPlanner/Common.cs
 2012-04-19 11:08:34 -05:00
Adam M Rivera 24363ccb83 Merge branch 'master' of https://code.google.com/p/ardupilot-mega into retro-loiter 2012-04-19 10:17:36 -05:00
Adam M Rivera d29f1ef331 Loiter: Made the "retro loiter" routines configurable. Add RETRO_LOITER_MODE ENABLED to APM_Config.h to enable the older loiter shtuff. 2012-04-19 10:16:29 -05:00
James Goppert 0e7e77760a Updated ArduPlane/ArduCopter cmake options. 2012-04-18 15:16:02 -04:00
Adam M Rivera 7b277d7044 config.h: Added RTL_APPROACH_DELAY config value. 2012-04-16 14:00:08 -05:00
rmackay9 84b07b5e6a ArduCopter - LEDS - added new COPTER_LEDS definition 
Code by Robert Lefebvre
 2012-04-12 22:55:32 +09:00
Andrew Tridgell 0bc604f030 ACM: removed FORCE_AUTOMATIC_DECLINATION_UPDATE 
we now have the EEPROM option COMPASS_AUTODEC instead
 2012-03-30 14:25:27 +11:00
Adam M Rivera 51b70e4d36 ArduCopter: Changed implementation of configuration value for automatic declination. There is now a FORCE_AUTOMATIC_DECLINATION_UPDATE that when enabled will update the declination on every GPS 3D fix regardless of whether or not the user saved a value to the EEPROM. By default the declination will only be set by the automatic declination routine if the user has not saved a declination to the EEPROM. 2012-03-30 14:25:06 +11:00
rmackay9 1f4cfb9333 ArduCopter - added PID log type. Implemented for Yaw stabilize and rate controllers. 2012-03-25 16:09:08 +09:00
Jason Short e2560c5865 Throttle_hold was in APM_Config - which is ignored by the Mission planner Hex generator 2012-03-22 10:01:24 -07:00
rmackay9 0773a25b5d ArduCopter - increased default THROTTLE_CRUISE to 450 2012-03-20 16:34:07 +09:00
rmackay9 dc92da818c ArduCopter - remove reference to AUTO_RESET_LOITER that is not used anymore 2012-03-18 14:53:19 +09:00
Jason Short 491af02d8a ACM: Lowered gains from flight tests today with 3DR Quad 2012-03-17 11:04:01 -07:00
Jason Short 3038da1dc3 ACM: Softer Loiter Gains 2012-03-16 14:10:19 -07:00
Jason Short a52a14bf12 Tune down Loiter_P a hair 2012-03-15 19:17:27 -07:00
Jason Short 48ba24a810 ACM: Loiter tuning updates, turned up I a bit, a higher I will work better if the system is well tuned. 2012-03-13 10:23:31 -07:00
Jason Short 7034b709d1 ACM: removing old define 2012-03-12 13:11:30 -07:00
Jason Short 0b51d9b8b0 ACM: Made Loiter_D 0 by default. Accidentally left it on by default. 2012-03-12 10:37:15 -07:00
Jason Short a989b88680 ACM: made same as Loiter I 2012-03-11 23:21:49 -07:00
Jason Short 0d434ca92c ACM: Tuning based on flights today 2012-03-11 23:21:49 -07:00
Adam M Rivera 2524f9c8df AP_Declination: Added new config value to allow the user to have the declination overwritten on every 3D fix. 
Signed-off-by: Andrew Tridgell <tridge@samba.org>
 2012-03-11 20:59:47 +11:00
Jason Short 83729d0f75 ACM: decreased rate P for alt hold to remove bumpy repsonse 2012-03-10 12:41:06 -08:00
Jason Short 220d5a1c6e ACM: Increased the altitude error P for smoother alt hold response 2012-03-10 12:40:44 -08:00
Jason Short 4b703e8842 decreased the loiter rate P for overshoot 2012-03-10 12:40:07 -08:00
Andrew Tridgell 7e4c8592ff ACM: make it possible to build ArduCopter with quaternions 2012-03-10 10:34:29 +11:00