move throttle_slew_limit and THR_SLEWRATE parameter
move have_skid_steering to library
move mix_skid_steering to library's output_skid_steering method
move radio.cpp's output channel initialisation to motor's init method
use motors.get_throttle and get_steering instead of getting from Servo objects
use motors.set_throttle and set_steering instead of setting to Servo object
AP_Arming::arming_required is replaced with SAFE_DISARM parameter
It is a very simply form of station keeping. If a boat is
loitering on a waypoint and it gets blown off a distance
past the WAYPOINT_RADIUS it will automaticlly drive back to
the waypoint.
Rover now accepts a new message MAV_CMD_NAV_SET_YAW_SPEED
which has an angle in centidegrees and a speed scale and the rover
will drive based on these inputs.
included update_trigger function
added camera trigger precise time mark
detect camera feedback pin status
added support for TRIGGER MSG
corrected according to defines.h
Global revision of message severity values.
Required also change to the low priority function gcs_send_text_fmt()
on GCS_Mavlink.cpp to disable the automatic setting of priority on
messages sent by this function
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.
This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.
AVR-specific places were not changed.
Rover now honours the Param1 setting of a time in seconds for a
NAV_WAYPOINT and the Rover will loiter at that waypoint for that
period of time.
Note that as soon as the Rover reaches that waypoint the loiter timer
will start. If you enter a different mode during this time (HOLD for
instance) the timer resets. If you then switch back to AUTO
mode and the Rover returns to that waypoint it will wait for the
loiter time configured in param1.
