Andrew Tridgell
ea3ff853c7
Tools: added MatekL431-Rangefinder bootloader
2022-04-17 17:40:04 +10:00
Andrew Tridgell
9f58c73780
hwdef: Added MatekL431-Rangefinder
2022-04-17 17:40:04 +10:00
Peter Barker
bca4fc9608
hwdef: disable serially-attached actuators on SkyViper
2022-04-17 09:10:10 +10:00
Andrew Tridgell
95ae150a21
AP_InertialSensor: catch FIFO overruns on BMI088
...
we have seen errors where the BMI088 gets out of sync, so that the 3
axes are rotated. The data is shifted by 4 bytes, so that X=Z, Y=X
and Z=Y
this changes the BMI088 to "stop on full" mode, which is what Bosch
use in their example drivers, and also catches FIFO overrun events and
triggers a full FIFO reset. This should fix the problem with the FIFO
sync
2022-04-16 19:24:16 +10:00
Andrew Tridgell
973befa5d8
GCS_MAVLink: prevent devop larger than buffer
2022-04-16 19:24:16 +10:00
Andrew Tridgell
4c9a851fc6
SITL: update for changed INS_NOTCH parameter name
2022-04-16 08:14:06 +10:00
Andrew Tridgell
db9d796dd4
Tools: update for changed INS_NOTCH parameter name
2022-04-16 08:14:06 +10:00
Andrew Tridgell
f5c3b56426
AP_HAL_ChibiOS: update for changed INS_NOTCH parameter name
2022-04-16 08:14:06 +10:00
Andrew Tridgell
627f62d23b
Plane: param conversion for INS_NOTCH to INS_HNTC2
2022-04-16 08:14:06 +10:00
Andrew Tridgell
47e95c2a88
Copter: param conversion for INS_NOTCH to INS_HNTC2
2022-04-16 08:14:06 +10:00
Andrew Tridgell
ab5e8419d8
AP_InertialSensor: move INS_HNTC2 to a new parameter table ID
2022-04-16 08:14:06 +10:00
Andrew Tridgell
fbc9b771d1
AP_Periph: updated release nodes for 1.3.1
2022-04-15 13:48:31 +10:00
Peter Barker
fe740681af
autotest: test_build_options.py: undef variables before setting them
2022-04-15 12:37:26 +10:00
Bill Geyer
836ae87955
Copter: properly set feedforward enabled before exit
2022-04-14 07:49:38 +09:00
Willian Galvani
cb4f5ac578
Autotest: Sub: tweak params
2022-04-13 16:23:55 -03:00
Willian Galvani
c63d12b6c9
Autotest: Sub: fix sub tests for new althold implementation
...
With this implementation (same as copter's) 1450 is within the pilot deadzone,
which breaks the test.
2022-04-13 16:23:55 -03:00
Willian Galvani
6e326ee912
AC_PosControl_Sub.h: do not use our own input_vel_accel_z
2022-04-13 16:23:55 -03:00
Willian Galvani
81cd49213a
Autotest: Sub: tighten default watch_altitude_maintened delta
2022-04-13 16:23:55 -03:00
Willian Galvani
cd9cc1419b
Sub: Improve althold to handle small inputs with payload/buyoancy better
2022-04-13 16:23:55 -03:00
Willian Galvani
e23e2cb63f
Autotest: Sub: Add depth hold cases of large buoyancies and small inputs
2022-04-13 16:23:55 -03:00
mateksys
16a8400f85
AP_HAL_ChibiOS:add icm42688p as substitution
2022-04-13 20:59:07 +10:00
Andrew Tridgell
69666d19ee
Tools: fix cygwin build error
2022-04-13 18:30:18 +10:00
Peter Barker
e788941f70
hwdef: turn off various GPS backends on on AP_Periph
2022-04-13 18:23:51 +10:00
Peter Barker
ccca0e8e0f
AP_GPS: stop using HAL_BUILD_AP_PERIPH to gate GPS backends
2022-04-13 18:23:51 +10:00
Andrew Tridgell
cdfa682be0
AC_AttitudeControl: use deadzone for pitch
...
when pitch for nose-in and tail-in is enabled we should use the
deadzone
2022-04-13 18:19:02 +10:00
Andrew Tridgell
f4548daa5a
AC_AttitudeControl: added an option for pitch weathervaning
...
when nose-in or tail-in, if the aircraft has significant pitch
asymmetry in hover then we would spin around in no wind if we use
pitch as an input
this makes pitch input for nose-in and tail-in optional and off by
default to preserve existing behaviour
2022-04-13 18:19:02 +10:00
Peter Barker
c33f6f3a8d
autotest: add tests to ensure we get BCN, RPM and PRX/PRXR log msgs
2022-04-13 16:22:19 +10:00
Peter Barker
134e4ff705
Rover: move logging of Beacon into Beacon library
2022-04-13 16:22:19 +10:00
Peter Barker
39eca59938
ArduCopter: move logging of Beacon into Beacon library
2022-04-13 16:22:19 +10:00
Peter Barker
e5c40d0e54
AP_Logger: move logging of Beacon into Beacon library
2022-04-13 16:22:19 +10:00
Peter Barker
bbcf0a0968
AP_Beacon: move logging of Beacon into Beacon library
2022-04-13 16:22:19 +10:00
Peter Barker
2327218822
Rover: move logging of Proximity into Proximity library
2022-04-13 16:22:19 +10:00
Peter Barker
de2182b88f
ArduCopter: move logging of Proximity into Proximity library
2022-04-13 16:22:19 +10:00
Peter Barker
a62e08ee40
AP_Proximity: move logging of Proximity into Proximity library
2022-04-13 16:22:19 +10:00
Peter Barker
795427e574
AP_Logger: move logging of Proximity into Proximity library
2022-04-13 16:22:19 +10:00
Peter Barker
3d854c7e92
Rover: move logging of RPM into RPM library
2022-04-13 16:22:19 +10:00
Peter Barker
f023f0443d
GCS_MAVLink: move logging of RPM into RPM library
2022-04-13 16:22:19 +10:00
Peter Barker
ab86dafda7
AP_RPM: move logging of RPM into RPM library
2022-04-13 16:22:19 +10:00
Peter Barker
23f2055330
AP_Logger: move logging of RPM into RPM library
2022-04-13 16:22:19 +10:00
Peter Barker
c09f56112e
AP_Arming: move logging of RPM into RPM library
2022-04-13 16:22:19 +10:00
Peter Barker
04cc45de65
hwdef: remove non-ascii character from hwdef
...
Killing the custom build server
2022-04-13 12:14:17 +10:00
Randy Mackay
375ab84e56
SITL: correct suggestion to user re wind estimatation param value
...
EK3_MCOEF becomes EK3_DRAG_MCOEF
EK3_BCOEF_ becomes EK3_DRAG_BCOEF_
2022-04-13 07:57:35 +09:00
Randy Mackay
002bcca7f9
AP_Baro: correct param description refering to EK3 wind est params
...
AP_NavEKF3: correct wind estimate param descriptions
mention of EK3_BCOEF_X/Y becomes EK3_DRAG_BCOEF_X/Y
2022-04-13 07:57:35 +09:00
Randy Mackay
37e9ce3fb7
AP_NavEKF3: correct wind estimate param descriptions
...
EK3_MCOEF becomes EK3_DRAG_MCOEF
EK3_BCOEF_X/Y becomes EK3_DRAG_BCOEF_X/Y
2022-04-13 07:57:35 +09:00
QioTek
56513a0761
Tools: added QioTekAdeptF427 board ID
...
Tools: added QioTekAdeptF427 board ID
2022-04-12 23:32:28 +10:00
Peter Barker
7474a31a83
waf: take ap_version.h int items from environment as we do str items
...
This will mean we take the integer version of GIT_VERSION from the env
too
2022-04-12 11:47:48 +10:00
Peter Barker
fa293fd5f3
github: set GIT_VERSION_INT to consistent value for checksum tests
...
For consistent git hashes
2022-04-12 11:47:48 +10:00
Peter Barker
eb930f830b
Tools: build_ci.sh: set consistent GIT_VERSION_INT in env
...
For consistent compiler output
2022-04-12 11:47:48 +10:00
Peter Barker
e0a96eaa83
AP_GPS: remove more code based on GPS_MOVING_BASELINE
2022-04-12 11:20:01 +10:00
Peter Barker
aa72559d00
AP_GPS: tidy initialisation of sending blobs
2022-04-12 11:20:01 +10:00
