Commit Graph

6101 Commits

Author SHA1 Message Date
Michael du Breuil 8290bd4e67 Copter: check all EKF cores for health on arming 2019-04-09 10:53:25 +10:00
Peter Barker 5db75b313d Copter: use floats for roll/pitch
Otherwise we're taking floats, making them int32 and then making them
floats again when calling the attitude controller
2019-04-09 09:21:12 +09:00
Pierre Kancir 4f29d2e5a6 Copter: factorize esc calibration setup 2019-04-09 08:44:46 +09:00
Pierre Kancir 54380bd144 Copter: change always true condition to a timer 2019-04-09 08:44:46 +09:00
Peter Barker 41a20504b2 Copter: use RSSI singleton for logging 2019-04-09 09:33:13 +10:00
Peter Barker e5b25824eb Copter: remove unused takeoff_trigger_dz parameter 2019-04-09 08:15:39 +10:00
Peter Barker ef334fe3c7 Copter: remove hanging method declaration 2019-04-09 08:15:39 +10:00
Pierre Kancir 43dcf066c1 ArduCopter: move check_latlng to Location 2019-04-08 12:56:01 -07:00
Randy Mackay a5bdd12bfa Copter: replace TUNE_LOW/HIGH params with TUNE_MIN/MAX
change from uint16 to floats to ease setup
also add check that no function assigned to rc6
2019-04-08 15:24:00 +09:00
Peter Barker 85be2b0c8b Copter: clean up flip state enumerations
... including a redundant definition of the states...
2019-04-08 14:24:19 +09:00
Randy Mackay 69626ba855 Copter: rename FXY logging to FHXY
this keeps the log messages appearing directly below the related FHLD when looking in the MP log viewer
2019-04-08 11:26:59 +09:00
Leonard Hall df3e73f161 Copter: spool fixes for acro stabilize and throw 2019-04-08 09:42:21 +09:00
Randy Mackay d626ea66f1 Copter: poshold loses stray set-desired-spool-state
spool state is all handled higher up in the poshold state switch statement
2019-04-08 09:42:21 +09:00
Randy Mackay 29d05dfeac Copter: loiter mode gets roll and pitch from loiter_nav
both wp_nav and loiter_nav's get_roll() and get_pitch() simply get their values from the same underlying position controller
2019-04-08 09:42:21 +09:00
bnsgeyer 94738c3f86 Copter: change make_safe_shut_down to make_safe_spool_down 2019-04-08 09:42:21 +09:00
bnsgeyer f96da56ad6 Copter: Allow safe shutdown before disarming 2019-04-08 09:42:21 +09:00
bnsgeyer 7ff3a49a10 Copter:tradheli-spool logic fix for acro and stabilize 2019-04-08 09:42:21 +09:00
Leonard Hall 593925567b Copter: formatting fixes 2019-04-08 09:42:21 +09:00
Randy Mackay a6bfafefb0 Copter: move loiter and wpnav init out of make_safe_shut_down
resolves autotest RTLSpeed test failure
2019-04-08 09:42:21 +09:00
Leonard Hall 38cc5a817f Copter: consolidate mode state decisions
bnsgeyer and rmackay9 contributed to these changes

make_safe_shut_down waits for spool down before disarming
remove use of attitude_control::set_throttle_out_unstabilized to consolidate logic between multicopters and tradhelis
2019-04-08 09:42:21 +09:00
bnsgeyer d949c80d54 Copter: tradheli replaces rotor_runup_complete with spool state 2019-04-08 09:42:21 +09:00
Peter Barker 3b33f4ca4d Copter: add floating-point-constant designators 2019-04-05 23:04:17 -07:00
Michael du Breuil d1246f5868 Copter: Fix RangeFinder init 2019-04-06 09:15:22 +11:00
Pierre Kancir 4cec958269 ArduCopter: move location_update to Location and rename to offset_bearing 2019-04-06 09:10:28 +11:00
Pierre Kancir 5987966ac6 ArduCopter: move get_bearing_cd to Location and rename to get_bearing_to 2019-04-06 09:10:28 +11:00
Michael du Breuil 0e8c3dc485 Copter: include FWversion 2019-04-05 20:12:53 +11:00
Patrick José Pereira 86633e45ff Copter: Use new RC_Channel AUX_FUNC
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-04-03 09:53:58 -07:00
Peter Barker fad769f3bf Copter: add param conversion from MAG_ENABLE to COMPASS_ENABLED 2019-04-02 10:24:49 +11:00
Peter Barker 2040580ce7 Copter: move enabled parameter into compass library 2019-04-02 10:24:49 +11:00
bnsgeyer 3869507839 Copter: Tradheli- removes suppression of hover_trim_roll on auto takeoff 2019-03-29 13:13:55 +11:00
Rajat Singhal 49554bf8d9 Copter: Add function for sending POSITION_TARGET_LOCAL_NED message 2019-03-29 09:11:14 +11:00
Tom Pittenger 7824b64ad6 Copter: rename dataflash to logger 2019-03-28 16:40:57 +11:00
Peter Barker 86bd531b24 Copter: use convenience manual_override method 2019-03-27 22:33:47 -07:00
Randy Mackay 7c09084f02 Copter: add Loiter and Follow to aux switch 2019-03-28 13:54:22 +09:00
Peter Barker 8441542a52 Copter: remove climb_rate cache of inertial_nav.get_velocity_z
There were only two users of it and dozens of places using
get_velocity_z
2019-03-28 12:10:31 +11:00
Peter Barker 6bac6cd725 Copter: remove redundant compass arming checks
These are already part of prearm checks in the parent class, which must also pass for us to arm
2019-03-28 11:28:44 +11:00
ChristopherOlson e56c970eb0 Copter:AP_ARMING - remove collective position prearm check for heli 2019-03-28 10:40:54 +11:00
Peter Barker e9398e73ff Copter: tidy get_pilot_desired_throttle 2019-03-27 18:03:56 +11:00
Peter Barker c1c71fec23 Copter: move Mode functions into mode.cpp from Attitude.cpp (NFC) 2019-03-27 14:02:31 +11:00
Peter Barker 7e01d1ef50 Copter: correct compilation for ERROR_SUBSYSTEM_FLIGHT_MODE changing names 2019-03-27 13:23:12 +11:00
Peter Barker c7e21d95ef Copter: move Log_Write_Error into library 2019-03-27 12:36:40 +11:00
Peter Barker 7a1648059b Copter: stop passing dataflash into handle_radio_status 2019-03-27 10:38:39 +11:00
Peter Barker 335c1769ee Copter: do not allow change to Drift if in non-manual-throttle mode
drift acts just like stabilise or acro in terms of pilot throttle when
pilot input is maxed.
2019-03-26 20:57:15 +11:00
Peter Barker d95160b33c Copter: move check for high-throttle on mode change up 2019-03-26 20:57:15 +11:00
Peter Barker 34d9ce27af Copter: make get_pilot_desired_throttle a method on Mode 2019-03-26 20:57:15 +11:00
Patrick José Pereira 33764d6c3b Copter: Fix typo
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-03-26 15:39:23 +11:00
Peter Barker 9a2d5ac5a6 Copter: move various sensor status flag updates up 2019-03-26 11:03:21 +11:00
bnsgeyer 2ec470aaee Copter:tradheli - added swash params to convert on upgrade 2019-03-20 10:40:20 +10:00
bnsgeyer 2fc942ac24 Copter: tradheli-convert swash parameters on firmware upgrade 2019-03-20 10:40:20 +10:00
Peter Barker f4a21d446f Copter: move command-long DO_SET_HOME up 2019-03-19 19:56:13 +11:00
Peter Barker 451f5f17ce Copter: move devo telemetry handling to GCS 2019-03-19 14:39:14 +11:00
Peter Barker 4f70bdd046 Copter: GCS can report simple/supersimple input modes 2019-03-19 14:39:14 +11:00
Peter Barker a5c18ff8f5 Copter: move vehicle_initialised to be on GCS not GCS_MAVLink 2019-03-19 14:39:14 +11:00
Peter Barker e22b29bce4 Copter: FrSky support has moved to GCS 2019-03-19 14:39:14 +11:00
Peter Barker 3e0ec99100 Copter: fill Notify flag for flying 2019-03-19 14:39:14 +11:00
Peter Barker 227f6499d3 Copter: mark vtol_state and landed_state methods as override 2019-03-19 10:32:50 +11:00
Peter Barker 366051c39f Copter: use enum class for AltFrame enumeration 2019-03-19 10:31:18 +11:00
Peter Barker 85d9dd6f64 Copter: move sending of RPM message up 2019-03-16 10:33:01 +09:00
Randy Mackay 467e8481fb Copter: minor formatting fix to ekf failsafe check 2019-03-15 15:44:01 +09:00
chobits 6bee4216c0 Copter: speed up EKF failsafe by checking if velocity innovations > 2x FS_EKF_THRESH 2019-03-15 15:36:13 +09:00
Bill Geyer c40312d0f9 Copter: fix to acro trainer leveling mode 2019-03-15 15:26:24 +09:00
Randy Mackay e57ec068f0 Copter: remove duplicate guided limit-init-time-and-pos
this is called from nav_guided_start()
2019-03-15 14:51:35 +09:00
Randy Mackay 8d66c5f547 Copter: move do_payload_place handler
commands are placed in numerical order
2019-03-15 14:51:35 +09:00
Peter Barker 6d87b9316f ArduCopter: compass init never fails 2019-03-13 13:06:50 +11:00
Peter Barker f189860162 Copter: use enum class for ArmingMethod and ArmingRequired 2019-03-12 19:48:14 +11:00
Peter Barker 281dbfcef8 Copter: support send_extended_sys_state 2019-03-12 09:16:13 +09:00
Peter Barker 7b6fef16aa Copter: remove redundant PreArm: in check_failed calls 2019-03-08 08:57:53 +09:00
Peter Barker cc8912255e Copter: move checking of fence up 2019-03-08 08:57:27 +09:00
Randy Mackay ead3682e4c Copter: correct ACRO_YAW_P param description
this parameter applies to all flight modes
2019-03-06 14:42:59 +09:00
Randy Mackay 938868cc03 Copter: 3.6.7 release notes 2019-03-06 14:24:25 +09:00
Peter Barker cac87b8e0b Copter: use attitude and position controller prearm checks 2019-03-06 10:36:32 +09:00
Peter Barker 4f69eefd4a Copter: remove unused includes 2019-03-05 13:19:29 +09:00
Peter Barker eed73749f9 Copter: move sending of send_pid_tuning up 2019-03-05 10:41:56 +11:00
Michael du Breuil cac4b91671 Copter: Allow scripting to run 2019-03-05 08:45:54 +11:00
Peter Barker 7c05364612 Copter: reindent mode init functions (NFC) 2019-03-01 13:43:20 +09:00
Peter Barker fab2d59a1c Copter: move check for position up 2019-03-01 13:43:20 +09:00
Peter Barker e744df585c Copter: avoid int32_t<->float conversions 2019-03-01 12:09:58 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas f1e43979ab ArduCopter: NFC small renames and comment improvements 2019-03-01 09:15:24 +09:00
Dr.-Ing. Amilcar do Carmo Lucas 08124faab4 Copter: replace location_offset() and get_distance() function calls with Location object member function calls
This allows removing duplicated code
2019-02-28 11:44:09 +11:00
Randy Mackay a90f94d5a7 Copter: 3.6.7-rc1 release notes 2019-02-28 09:15:44 +09:00
Randy Mackay 384bca9482 Copter: stop at waypoint depending upon next command 2019-02-27 13:30:40 +09:00
Randy Mackay a903c91c40 Copter: remove unused auto_spline_start declaration 2019-02-27 13:30:40 +09:00
IamPete1 ba3d1bc6c7 Copter: move E-stop state to SRV_Channel 2019-02-27 08:51:24 +09:00
Peter Barker 2c814e9de2 Copter: get_alt_above_ground to get_alt_above_ground_cm 2019-02-26 19:31:41 +09:00
Andrew Tridgell ef3306d408 Copter: fixed crash on mavlink send before pos_control is allocated 2019-02-26 16:18:26 +11:00
Peter Barker a48f461158 Copter: remove position-vector methods
Both were used in just one place
2019-02-26 14:09:21 +11:00
Arjun Vinod d02d897928 Copter: make LOITER_TIME send "Reached command" message to GCS 2019-02-26 10:19:37 +09:00
Arjun Vinod 8044d98382 Copter: do an early-return if the time hasn't been reached 2019-02-26 10:14:56 +09:00
murata 8644f4d76e Copter: Disable option code
Copter: Revert change

Copter: Change mistakes
2019-02-26 10:00:00 +09:00
Peter Barker 693873fd04 Copter: AHRS set_orientation renamed to update_orientation 2019-02-26 10:28:09 +11:00
Peter Barker 8e1b48ef1e Copter: use height-above-ground for landing gear deployment 2019-02-26 08:21:32 +09:00
Peter Barker 66416a5289 Copter: make toymode parameter descriptions consistent
Also correct "home button" -> "left (Mode button)"
2019-02-22 11:36:28 +09:00
Peter Barker 4187243e5c Copter: Rally no longer takes ahrs in constructor 2019-02-20 18:03:38 +11:00
Peter Barker c622645ff1 Copter: move update_sensor_flags to GCS_Copter.cpp 2019-02-20 11:57:00 +11:00
Peter Barker 5ff80e06d1 Copter: move update_sensor_status_flags into GCS subclasses 2019-02-19 14:09:59 +11:00
Peter Barker 039aa3f3b3 Copter: move sensor flags to be a GCS thing rather than a GCS_MAVLINK thing 2019-02-19 14:09:59 +11:00
Peter Barker f759c7ac7e Copter: GCS_MAVLink takes care of mavlink capabilities 2019-02-19 13:14:52 +11:00
Peter Barker 9bc23d3f28 Copter: move try_send_message of nav_controller_output up 2019-02-19 10:08:00 +11:00
Peter Barker f64ad2f433 Copter: move visual odometry update function into AP_VisualOdom 2019-02-16 15:13:59 +11:00
Randy Mackay 6b0456e3ac Copter: 3.6.6 release notes 2019-02-16 08:47:18 +09:00