Commit Graph

45970 Commits

Author SHA1 Message Date
Michael du Breuil 0f363809f5 AP_GPS: Fix some unit errors with the GPS blended instance
Also add a static assert and some docs on the fact that blending only
works with 2 actual recievers at the moment

Also a small optimization to not call get_rate_ms() twice
2021-01-28 11:55:30 +11:00
Andy Piper 6f5d5c2bf9 AAP_HAL_ChibiOS: allow asserts to be printed on a GPIO pin 2021-01-27 19:36:58 +11:00
Andy Piper d41c92d317 AP_HAL_ChibiOS: don't overwrite fault handler data, register forced faults 2021-01-27 19:13:18 +11:00
Andy Piper 20d928a86a AP_HAL_ChibiOS: don't share DMA on OmnibusNanoV6 for Flash SPI 2021-01-27 19:04:49 +11:00
Andy Piper 873d35acd9 AP_HAL_ChibiOS: bi-directional dshot for MatekH743 2021-01-27 18:58:38 +11:00
Andy Piper 877dde4736 AP_HAL_ChibiOS: on BeastF7 share TIM3 UP/CH and give flash SPI dedicated channel 2021-01-27 18:54:43 +11:00
Andy Piper 2395018000 AP_BLHeli: don't log invalid bi-dir dshot values as they are never used 2021-01-27 18:54:10 +11:00
Andy Piper 9249b73e8b AP_HAL_ChibiOS: correctly allow mixing of bidir and non-bidir channels 2021-01-27 18:49:15 +11:00
Andy Piper 2823fa7245 AP_HAL_ChibiOS: never write bytes that have not been erased on H7
Be more careful about flash failure conditions on H7
2021-01-27 18:30:36 +11:00
Andy Piper 78735a946e AP_HAL_ChibiOS: allow STM32_FLASH_DISABLE_ISR for H7 2021-01-27 18:30:36 +11:00
Andrew Tridgell 6bc4e995a4 CI: build CubeOrange-periph
this ensures H7 based peripherals (which are getting more common)
don't break
2021-01-27 18:24:03 +11:00
Andrew Tridgell 155de6d2bc HAL_ChibiOS: fixed build of AP_Periph on H7 2021-01-27 18:24:03 +11:00
Lau Yan Han 96dc8339f1 Build.md: Updated waf configure commands for CubeBlack and fmuv3 2021-01-27 12:38:11 +11:00
Pierre Kancir c02dfd1214 Autotest: add EndMissionBehavior Test for rover 2021-01-27 08:23:52 +09:00
Shadow db1c653cc6 Rover: Add manual mode to MIS_DONE_BEHAVIOR 2021-01-27 08:23:52 +09:00
Andrew Tridgell 0535c4f592 AP_InertialSensor: default TMAX to 70
if user forgets to set this then better to just timeout rather than
calibrating over a small range
2021-01-27 09:49:35 +11:00
Andrew Tridgell 9861a02c60 HAL_ChibiOS: save INS_ACC*ID persistent parameters
this enables full factory accelerometer calibration, so the user is
not required to run an accelcal, even if they change vehicle type
2021-01-27 09:49:35 +11:00
Andrew Tridgell bdb364d461 AP_InertialSensor: save the accelerometer ID parameters
this is needed for factory accel cal
2021-01-27 09:49:35 +11:00
Andrew Tridgell 87528f47c8 AP_IOMCU: prevent internal error on bootloader flash
when we flash the bootloader on boards with an IOMCU we expect a long
delay as the CPU stops during the flash
2021-01-27 09:49:35 +11:00
Andrew Tridgell bb278a1cc7 Tools: allow tempcal_IMU.py to run without existing tcal params
this makes it possible to run the tcal script on a log from a board
that doesn't have any existing temperature calibration params
2021-01-27 09:49:35 +11:00
Andrew Tridgell 6163659887 AP_HAL: prevent a single bad transfer causing an IMU to be marked unhealthy
This is a response to this issue:
https://discuss.ardupilot.org/t/gyro-problem-after-waypoint-log-analisys

The 2nd gyro went bad with a large offset. Then the first gyro was
marked unhealthy, forcing the EKF to switch to the 2nd gyro. That
resulted in a crash.

I think the SPI bus was getting bad transfers and the register check
code happened to get a bad transfer, thereby marking the first gyro
unhealthy

This change ensures we only fail the register check if two transfers
in a row are bad. This makes it much less likely that a noisy bus will
lead to an unhealthy gyro
2021-01-27 09:47:55 +11:00
Pierre Kancir 2b71bf8e99 Autotest: fix subtests completion 2021-01-27 08:27:54 +11:00
Andrew Tridgell b20604bb59 Plane: update release notes for 4.0.8 2021-01-26 17:17:40 +11:00
Iampete1 ebfe593e38 AP_Scripting: add example script setting up a custom MotorMatrix 2021-01-26 11:07:36 +09:00
Iampete1 643966fb3e Copter: add SCRIPTING_MATRIX frame class 2021-01-26 11:07:36 +09:00
Iampete1 004f873dc7 Plane: update Quadplane FRAME_CLASS description 2021-01-26 11:07:36 +09:00
Iampete1 5c397d4674 AP_Scripting: add MotorMatrix bindings 2021-01-26 11:07:36 +09:00
Iampete1 fca6f7027b AP_Motors: allow Matrix config from scripting 2021-01-26 11:07:36 +09:00
Peter Hall d0e1e85b9e AP_Motors: add get_frame_mav_type 2021-01-26 11:07:36 +09:00
Iampete1 0a23084d43 Copter: move get_frame_mav_type to motors 2021-01-26 11:07:36 +09:00
Andrew Tridgell 5f4b5c4b94 Plane: prevent failsafe from changing mode during landing
this prevents RC or GCS failsafe from triggering a mode change during
a landing
2021-01-26 11:17:10 +11:00
Peter Barker 87486739d1 Plane: disallow changing to INITIALISING mode 2021-01-26 10:47:27 +11:00
Randy Mackay d487d6152e Plane: ahrs pre-arm always runs position checks 2021-01-26 10:46:49 +11:00
Randy Mackay e7c2eb1705 Sub: ahrs pre-arm skips position checks 2021-01-26 10:46:49 +11:00
Randy Mackay f6da769de8 Rover: ahrs only checks position in modes that require it 2021-01-26 10:46:49 +11:00
Randy Mackay dc515b87df Copter: ahrs only checks position in modes that require it 2021-01-26 10:46:49 +11:00
Randy Mackay f6cb0819ef AP_NavEKF3: pre_arm_check may skip position checks 2021-01-26 10:46:49 +11:00
Randy Mackay 8ecac27777 AP_NavEKF_Source; pre_arm_check may skip position checks 2021-01-26 10:46:49 +11:00
Randy Mackay 62932f884f AP_AHRS: pre_arm_check may skip position checks 2021-01-26 10:46:49 +11:00
Andrew Tridgell 49e2a0caed Tools: fixed valgrind errors with AP_Param::ParamToken 2021-01-26 10:43:09 +11:00
Andrew Tridgell 1716fcf995 GCS_MAVLink: fixed valgrind errors with AP_Param::ParamToken 2021-01-26 10:43:09 +11:00
Andrew Tridgell ac35867c17 AP_Param: fixed valgrind errors with AP_Param::ParamToken 2021-01-26 10:43:09 +11:00
Andrew Tridgell 12b93e2922 AP_OSD: fixed valgrind errors with AP_Param::ParamToken 2021-01-26 10:43:09 +11:00
Andrew Tridgell 6c684538d3 AP_Param: greatly speed up param download with disabled parameters
allows fast skip over disabled subgroups. This removes a long delay
with param download on a MatekF405-STD where the final parameters
associated with the OSD took 80ms to fetch, causing a long loop delay
2021-01-26 10:43:09 +11:00
Bill Geyer d19dca37d5 Copter: 4.0.6 release notes 2021-01-25 18:39:39 -05:00
Peter Barker 95bc9cca79 ArduPlane: use ground_course in preference to ground_course_cd 2021-01-26 10:22:28 +11:00
Peter Barker d426d8e1f8 AP_GPS: use ground_course in preference to ground_course_cd 2021-01-26 10:22:28 +11:00
Peter Barker 358069df24 AP_AHRS: use ground_course in preference to ground_course_cd 2021-01-26 10:22:28 +11:00
WillyZehnder 2e2ec79992 RC_Channel: reserve AUX_FUNC for MISSION_RELATIVE 2021-01-26 10:14:11 +11:00
Pierre Kancir a62dc3b3e0 Rover: disable switching and arming in INITIALIZING mode 2021-01-26 08:10:50 +09:00