Octa-H is like an Quad-X but with each side having two additional motors placed between the front an back motors.
Octa-H is quite different from Quad-H.
Rename class to Solo
Use internal I2C bus
Add capacity, current, button press checking
Only check continuously for voltage if reading fails for more than 5 seconds
libraries/AP_Math/tests/test_math.cpp.3.o: In function `MathTest_IsEqual_Test::TestBody()':
test_math.cpp:(.text._ZN21MathTest_IsEqual_Test8TestBodyEv+0x1a0): undefined reference to `std::enable_if<std::is_floating_point<std::common_type<float, double>::type>::value, bool>::type is_equal<float, double>(float, double)'
collect2: error: ld returned 1 exit status
this fixes zero pwm output on a subset of channels. When using
motortest and asking for a single channel, multiple channels fired due
to an incorrect optimisation
Return type is T which can be an integral type, float or double. By
dividing by 2 we avoid float operation on the first case and do the
right thing on the second and third.
Return type is float, so operate on float types everywhere.
Fixes this warning while building for PX4:
../../libraries/AP_Math/AP_Math.cpp: In instantiation of 'float safe_asin(T) [with T = double]':
../../libraries/AP_Math/AP_Math.cpp:56:48: required from here
../../libraries/AP_Math/AP_Math.cpp:44:11: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
if (v >= 1.0f) {
^
../../libraries/AP_Math/AP_Math.cpp:47:11: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
if (v <= -1.0f) {
^
We are calling fabsf(), which returns a float. We should use the epsilon
from float type, not from the argument type passed to fabsf().
On the other hand when the double version is instantiated we do want to
use the std::numeric_limits<double>::epsilon() value.
This adds a branch to the function, but it's removed when the function
is intantiated by the compiler since the type is known at compile-time.
Fixes this warning when building for PX4:
../../libraries/AP_Math/AP_Math.cpp: In instantiation of 'typename std::enable_if<std::is_floating_point<typename std::common_type<_Tp, _Up>::type>::value, bool>::type is_equal(Arithmetic1, Arithmetic2) [with Arithmetic1 = double; Arithmetic2 = double; typename std::enable_if<std::is_floating_point<typename std::common_type<_Tp, _Up>::type>::value, bool>::type = bool]':
../../libraries/AP_Math/AP_Math.cpp:23:66: required from here
../../libraries/AP_Math/AP_Math.cpp:17:29: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
return fabsf(v_1 - v_2) < std::numeric_limits<decltype(v_1 - v_2)>::epsilon();
^
If the user sets a non-zero value of the delay it will be used in preference over the default value for that GPS type.
If the GPS type is unknown and the parameter is set to zero, then a default delay of 1 sample period will be used (eg 200ms for 5Hz).
Do not time out and provide an escalating series of messages. We may need to adjust the time thresholds used for escalation.
Do not wait if the EKF is not using the GPS.
Copter operation without a magnetometer is limited to constant position and relative position modes only (no GPS or range beacon fusion permitted)
Copter optical flow operation without a magnetometer is permitted.
The ability of planes to takeoff/launch without a magnetometer and align the yaw using the GPS velocity is retained.
Prevent bad values for GPS time delay pushing the GPS time stamp outside the range of IMU data contained in the buffer. If this occurs it can prevent the GPS measurements from being fused and cause loss of navigation.
Use the time delay returned by the GPS driver.
Wait long enough for the GPS configuration to be determined, but time out after 30 seconds and warn the user that a default value for time delay will be used.
Switch to use of an airspeed reading averaged across the raw sensor readings. since the last update.
This avoids use of the IIR which requires a larger time delay compensation and violates the assumption of uncorrelated noise.
The time delay parameter has been reduced to compensate for the removal of the airspeed IIR filtering.
This value is a compromise between what works best for a Ublox 6 which is around 200msec delay and the more recent 7 and 8 series receivers that are around 120msec delay.
Adapt the lengths of the IMU and observations buffers on startup to the specified time delays and update rates.
This does require the EKF to be re-started if time delays are changed.
