Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-08 00:48:30 -04:00
Code Issues Packages Projects Releases Wiki Activity
39,433 Commits 71 Branches 510 Tags 771 MiB
e7ffe5f00b
Commit Graph

39433 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Andrew Tridgell
e7ffe5f00b HAL_ChibiOS: ensure bootloader flash is multiple of 32 bytes 2019-12-23 17:38:41 +11:00
Jacob Walser
7aca98aa39 Sub: version to 4.0.0beta2 2019-12-19 10:38:07 -05:00
Willian Galvani
642c511ba8 Sub: set alt target to surface-5cm when surface is detected 2019-12-19 10:35:31 -05:00
Willian Galvani
2af2a1ed05 Sub: Center throttle instead of zero-ing it in depth hold 
This was causing the vehicle to dive when the alt-hold was
disabled and subsequently enabled.
Probably because the filter was holding the throttle down.
 2019-12-16 10:10:41 -05:00
Willian Galvani
deccd051a0 Sub: Improve attitude control in depth hold 
This adds a specific case for yaw input only, and adds a missing
set to 'last_input_ms' which made the controls feel "sticky"
 2019-12-16 10:10:41 -05:00
Willian Galvani
265d848021 Sub: cleanup depth hold 
Remove block of code that is replicated in the flight mode init()
 2019-12-16 10:10:41 -05:00
Willian Galvani
ddd0119ccc Sub: use set_target_to_stopping_point_z() to stop instead of old logic 
This makes the control a little smoother and easier to fine-tune
the depth. The previous implementation caused large current spikes
and often made the rov shake when stopping.
 2019-12-16 10:10:41 -05:00
Willian Galvani
5a3f4777ea Sub: Use sub variant of relax_alt_hold_controllers 
It is defined in AC_PosControl_Sub.cpp
 2019-12-16 10:10:41 -05:00
Willian Galvani
d592382057 AC_PosControl_Sub: do not reset I term when relaxing alt hold controller 2019-12-16 10:10:41 -05:00
Willian Galvani
7e46685986 Sub: move trims to vehicle frame 2019-12-16 10:10:41 -05:00
Willian Galvani
9b1e0f0fa3 Sub: do not initialize rc channels 6 and higher 2019-12-10 11:08:30 -05:00
Willian Galvani
ee2bea5256 Sub: set cam mount to 0,0,0 and RC mode after initialization 2019-12-10 11:08:30 -05:00
Andrew Tridgell
a8f250c99a Sub: change version to 4.0.0beta1 2019-10-15 15:18:35 +11:00
Andrew Tridgell
c63f0ffa3e Sub: fixes for desired state 2019-10-15 15:15:25 +11:00
Willian Galvani
bf1082a8b6 Sub: Create MOTOR_DETECT mode 
This mode attempts to detect the direction of all motors and adjust parameters appropriately.
 2019-10-15 15:15:25 +11:00
Willian Galvani
79b3cfbbae APMotors_6DOF: Implement motor_is_enabled(), get_motor_angular_factors() and set_reversed(); 2019-10-15 15:15:25 +11:00
Willian Galvani
80b839dadc sub: fixup joystick changes according to review 
https://github.com/ArduPilot/ardupilot/pull/11861
 2019-10-15 15:15:25 +11:00
Justin
40d3339d9c joystick: addressed issue9801. Upon engaging input hold, the controller will not read new directional inputs until input hold is disabled or the conrols are returned to their neutral position. 2019-10-15 15:15:25 +11:00
Willian Galvani
9cc98a878c Sub: update calibration if reading is above water level 2019-10-15 15:15:25 +11:00
Willian Galvani
94c2651f86 AP_TemperatureSensor: Update TSYS01 for Pixhawk2 2019-10-15 15:15:25 +11:00
Willian Galvani
970abdfcc3 APMotors6DOF: add case for SIMPLEROV_3 2019-10-15 15:15:25 +11:00
Willian Galvani
8fcebbc8b1 APMotors6DOF: add roll factor for motors 4 and 5 for SIMPLEROV_4 and SIMPLEROV_5 2019-10-15 15:15:25 +11:00
Willian Galvani
03c75c6d5f Sub: improve motor test message 2019-10-15 15:15:25 +11:00
Willian Galvani
a79b673030 Sub: default RNGFNDR1_TYPE to mavlink 2019-10-15 15:15:25 +11:00
Willian Galvani
ff744ac37f Sub: force cam pan and tilt inputs to channels 7 and 8 2019-10-15 15:15:25 +11:00
Willian Galvani
b3b0f63e59 Sub: change stabilize mode to rate controls 2019-10-15 15:15:25 +11:00
Willian Galvani
9a07fce7e3 Sub: Enable depth hold in arbitrary attitudes 2019-10-15 15:15:25 +11:00
Willian Galvani
c045be20bb Sub: remove angle_boost logic 
This gets in the way of the vectored thrust implemented,
and is just not useful for Sub.
 2019-10-15 15:08:26 +11:00
Willian Galvani
ac1ef0bc6a Sub: AP_Motors6DOF: create get_throttle_in_bidirectional() 2019-10-15 15:08:26 +11:00
Willian Galvani
efddff71bf SITL: Sub: add angular drag based on a laminar, external flow 2019-10-15 15:08:26 +11:00
Willian Galvani
6bcd2162b9 SITL: Sub: Fix rotational physics logic 2019-10-15 15:08:26 +11:00
Willian Galvani
a1c5b7ba55 SITL: Sub: Use proper phyisics for thrusters 2019-10-15 15:08:26 +11:00
Willian Galvani
237ad94f92 SITL: Submarine: add torque for static stability 
Subs are statically stable regarding pitch and roll.
This patch reproduces this in SITL
 2019-10-15 15:08:26 +11:00
Willian Galvani
78248a1083 SITL: add deadzones to Sub thrusters PWM signals 2019-10-15 15:08:26 +11:00
Willian Galvani
9abe4fc445 SITL: Fix buoyancy direction for earth-frame 
Previously the sub would just go upwards, so rolling it 180º caused it to sink
 2019-10-15 15:08:26 +11:00
Willian Galvani
9cd0aef53e SITL: Add 6dof frame for Sub 2019-10-15 15:08:26 +11:00
Willian Galvani
0ba93c0787 SITL: get rid of frame_vectored.h for Sub 2019-10-15 15:08:06 +11:00
Willian Galvani
d4987be5f2 Sub: rate-limit init_motor_test() calls 2019-10-15 15:08:06 +11:00
Willian Galvani
1092e961ee Sub: Accept position_target_global_int for depth control in ALT_HOLD 2019-10-15 15:08:06 +11:00
Andrew Tridgell
fe889b6f4e Plane: prepare for release of 4.0.0beta3 2019-10-07 21:39:21 +11:00
Andrew Tridgell
82d2a02971 Plane: updated release notes for 4.0.0beta3 2019-10-07 21:38:51 +11:00
Andrew Tridgell
b3834457bd Plane: check airspeed and active Z controll for hover learning 2019-10-07 21:18:28 +11:00
Michael du Breuil
4f3762d8c2 Plane: Resore old default behaviour for throttle curves 
The change in this made QStabilize behave very differently then it had,
which is quite shocking in a test flight.
 2019-10-07 21:17:30 +11:00
Andrew Tridgell
6ebb9ad84a AP_HAL: enabled SLCAN on fmuv2 and Pixhawk1-1M 
this fits for now, and is needed for CAN GPS for now
 2019-10-07 21:14:24 +11:00
Andrew Tridgell
42c4b41bf6 AP_UAVCAN: cleanup ifdefs for SLCAN enable 2019-10-07 21:14:24 +11:00
Andrew Tridgell
83bacfa89c AP_HAL: cleanup ifdefs for SLCAN enable 2019-10-07 21:14:24 +11:00
Andrew Tridgell
0eb9a58f17 AP_HAL_ChibiOS: cleanup ifdefs for SLCAN enable 2019-10-07 21:14:24 +11:00
Andrew Tridgell
53e03816c0 AP_BoardConfig: cleanup ifdefs for SLCAN enable 2019-10-07 21:14:24 +11:00
Andrew Tridgell
a452f8e4ed switch optimisation to O2 
on average makes for faster and smaller code than O3
 2019-10-06 10:58:07 +11:00
Andrew Tridgell
ee25d05f3c AP_Math: make fill_nanf() use a signalling NaN 
we want use of these values to trigger a FPE
 2019-10-06 10:58:07 +11:00