Commit Graph

28 Commits

Author SHA1 Message Date
Andrew Tridgell 890bed4918 GPS: avoid output delays in the GPS auto detection
this sends out the GPS init strings in 16 byte chunks to avoid causing
timing glitches when no GPS is attached
2012-10-18 16:18:32 +11:00
uncrustify 2a0242439a uncrustify libraries/AP_GPS/GPS.cpp 2012-08-21 19:02:32 -07:00
Andrew Tridgell 79aae2114c GPS: support getting raw velocity values from a UBlox
this may give better velocity numbers than the value from COG
2012-08-15 20:06:35 +10:00
Andrew Tridgell 06070dbf23 AP_GPS: added last_ground_speed() method
used for dead-reckoning in AHRS
2012-08-11 11:59:47 +10:00
Andrew Tridgell 19954f30e5 GPS: added velocity and acceleration components
used by AHRS for acceleration correction
2012-06-27 16:01:49 +10:00
rmackay9 c034e38cbd ArduCopter HIL: changed calls to setHIL to send in time as a uint32_t (it was a float) 2012-06-26 22:50:17 +09:00
Andrew Tridgell ae9883a8e2 GPS: fixed auto-config of UBlox setup with no UBX messages
if a UBlox is configured for NMEA only, with no UBX messages at all
then it would never trigger the GPS_AUTO detection. This adds a UBX
config message to the init strings that enables the NAV_SOL message
2012-06-15 15:53:27 +10:00
Andrew Tridgell 0542539fc9 GPS: add stub settings for nav_setting in the other GPS drivers
only Ublox supports nav_setting so far
2012-06-10 16:34:53 +10:00
Andrew Tridgell 9adaacedcd GPS: added debug code to the main GPS class 2012-06-08 16:42:03 +10:00
Andrew Tridgell e9f35bfa7f GPS: expose last_fix_time 2012-03-10 10:34:32 +11:00
Andrew Tridgell efe2686b33 GPS: added an acceleration estimate to the GPS driver
This uses the GPS ground speed to estimate acceleration
2012-03-10 10:34:30 +11:00
Randy Mackay 98f3386ea0 Arduino 1.0 - changed all #includes of "WProgram.h", "wiring.h" and "WConstants.h to "Arduino.h".
Modified FastSerial's write function to return size_t (number of bytes written).
2012-01-28 12:25:47 +09:00
James Goppert 57301ce647 Cleaned up AP_GPS formatting. 2011-10-28 14:52:50 -04:00
deweibel@gmail.com 71d4015bc8 revert gps lib to 2602
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2608 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:38:31 +00:00
deweibel@gmail.com 8a35079907 clean up idleTimeout
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2606 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:20:39 +00:00
deweibel@gmail.com 0a0c6f9c26 Fix initialization of idleTimeout
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2602 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 21:11:45 +00:00
jasonshort dafe217178 made timeout public, settable
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2563 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:33:08 +00:00
james.goppert e6c4595d3c Massive warning fixes.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2089 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-04 19:12:27 +00:00
tridge60@gmail.com 81c5770b77 GPS: fixed the idle timer
we need to reset the idle timer only on good data, or a call to
init(). Otherwise we never use it.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1849 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-04 22:00:06 +00:00
jasonshort caf6a3dc0f Added setHIL to GPS.cpp
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1686 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-19 18:33:42 +00:00
DrZiplok@gmail.com 7fc6515300 Add support for the DIYD MTK v1.6 firmware
Nuke AP_GPS_IMU, as nothing is using it anymore.
Simplify the handling of no GPS/no fix detection.
Fix prototypes for ::init and ::read.
Update AP_GPS_Auto and corresponding example, nearly ready for primetime.
Use uint8_t rather than byte.
Strip some _error() calls to save space.  More could still go.



git-svn-id: https://arducopter.googlecode.com/svn/trunk@1246 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-24 06:35:09 +00:00
james.goppert aa115aea68 AP_GPS libs now recover from disconnect or failed initialization.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1188 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-19 13:24:29 +00:00
DrZiplok@gmail.com cb4e8144f4 Eliminate GPS::_error, as it's responsible for pulling in the old printf, which doesn't work anymore. Fixing it's not worth the effort.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@955 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-27 08:46:41 +00:00
DrZiplok 2e5be5d86b Revert the MTK GPS driver to only claiming a fix when the GPS has a 3D solution, per discussion with Paul.
Minor tidying and documentation.



git-svn-id: https://arducopter.googlecode.com/svn/trunk@683 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-17 20:13:53 +00:00
DrZiplok@gmail.com 0a94520682 Add support for automatically detecting the connected GPS and configuring accordingly.
Note that this is currently disabled as changes need to be made to APM to support it.

Tested with MTK, u-blox and SiRF GPS'.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@671 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-17 06:06:04 +00:00
paulbmather@gmail.com 079dd3c617 Changes to accommodate blinking lights and loss of GPS commands. Tested with NMEA, uBlox, Sirf and MTK. Does not function correctly with rmack's changes to APM_Compass posted 10/17/2010 (I don't know why).
git-svn-id: https://arducopter.googlecode.com/svn/trunk@669 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-17 04:07:46 +00:00
DrZiplok@gmail.com 31ab494aaa Jason's GPS_None pointed out a few changes that in turn drastically simplify it.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@431 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-09-07 05:57:39 +00:00
DrZiplok@gmail.com 3e1cd1ea2e Set native line endings on checkout to help avoid confusion.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@419 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-09-06 20:18:32 +00:00