Karthik Desai
40cd0cd17f
Tools: autotest: Use the generic run_test.
...
If any of the tests throws an exception, it will be caught by the generic test function
that collects all errors and displays them before passing the result to the vehicle testcode.
Hence the name of the test and the exception that got raised get printed in a single
location. This nicely reduces code duplication.
2018-05-09 14:23:45 +10:00
Karthik Desai
7a20dd8b73
Tools: autotest: Added a generic run_test.
...
This function is called from every vehicle to run a test. If any of the tests throws an exception, it will be caught here, and the name of the test and the exception that got raised will be added to the fail_list
2018-05-09 14:23:40 +10:00
Karthik Desai
b485867db3
Tools: autotest: Check if the mode exists in the dictionary
2018-05-09 14:23:35 +10:00
Karthik Desai
d26c09ccac
Tools: autotest: Add and raise exceptions for wait_* helper functions
2018-05-09 14:23:26 +10:00
Dimitri Vasilkov
d2c247bb90
Added to success.txt, added UChicago to locations.txt
2018-05-08 13:42:31 -07:00
Peter Barker
cb2e3424ee
Tools: add kilobytes as known unit
2018-05-08 09:36:01 +10:00
Randy Mackay
f8711f70c9
Tools: correct sitl rover-skid default params
...
steering rate P gain was too high, default is better
2018-05-05 10:13:06 +09:00
Andrew Tridgell
3b143a99bf
autotest: removed sitl-debug varient
2018-05-04 18:33:53 +10:00
Andrew Tridgell
9e76555152
autotest: added --no-extra-ports option for sim_vehicle.py
2018-05-02 19:24:20 +10:00
Pierre Kancir
a43183ec14
Tools: sim_vehicle.py: Allow to pass custom param file
2018-04-26 22:40:49 +01:00
Peter Barker
5b03835103
Tools: autotest: correct pattern match in get_parameter
2018-04-18 20:31:55 +09:00
Peter Barker
802e4c6315
Tools: autotest: add tests for relays
2018-04-18 20:31:55 +09:00
Karthik Desai
75ae59c0c8
Autotest: Remove frame initialisation.
...
This will otherwise override the --frame parameter. The init() function takes care of the initialisation
2018-04-17 23:00:04 +10:00
Pierre Kancir
332560bdf7
Tools: add Skeytech location
2018-04-12 16:34:59 +01:00
murata
0fd71f909c
autotest: Add the home ground of ArduPilot drone software engineer training school in Japan.
2018-04-12 14:21:58 +09:00
Randy Mackay
8186ce0d32
Tools: add deg/s/s to valid parameter units
2018-04-05 12:14:59 +09:00
Peter Barker
a03ddc6798
Tools: autotest: correct default parameter names and paths
2018-03-29 09:19:36 +11:00
Michael du Breuil
69cf009898
AutoTest: Update copter battery failsafe test
2018-03-27 22:12:21 +01:00
Peter Barker
dca866c98d
Tools: make parameter generation failure clearer
2018-03-26 12:39:23 +11:00
Karthik Desai
9de1813ae6
Autotest: Fix a race condition on the regression tests on Windows
2018-03-23 09:13:37 +09:00
Peter Barker
5aa8890e5b
Tools: autotest: fail convertgpx if zip or gpsbabel fail
2018-03-22 09:11:44 +11:00
Peter Barker
338af9e142
Tools: correct misleading comment on per-vehicle parameter descriptions
2018-03-21 21:05:42 +11:00
Peter Barker
15450b956d
Tools: sim_vehicle.py: make --tracker work again
2018-03-21 11:46:47 +11:00
chobits
8b72809e37
Tools: fix motor rpm display in flightgear
2018-03-21 08:50:04 +09:00
Peter Barker
8511c2c04b
Tools: autotest: factor out apply_parameters_using_sitl
...
Three of our models start a SITL instance to apply parameters
then restart it so that the parameter changes can take effect.
Factor that functionality out.
2018-03-20 08:39:12 +11:00
Peter Barker
fe3b882bea
Tools: autotest: move close method up to common.py
2018-03-20 08:39:12 +11:00
Peter Barker
31ba99e58a
Tools: autotest: use buildlogs_path for all buildlogs
2018-03-20 08:39:12 +11:00
Peter Barker
b2cb6e196c
Tools: autotest: pull common MAVProxy options into common.py
2018-03-20 08:39:12 +11:00
Peter Barker
b908af10b7
Tools: autotest: remove non-working dump-logs script
...
We removed CLI from ArduPilot; this script will no longer work
2018-03-20 08:39:12 +11:00
Peter Barker
5fbb385c31
Tools: autotest: avoid exception when using Python3 on MacOSX
...
File "./Tools/autotest/sim_vehicle.py", line 999, in <module>
location)
File "./Tools/autotest/sim_vehicle.py", line 573, in start_vehicle
run_in_terminal_window(autotest, cmd_name, cmd)
File "./Tools/autotest/sim_vehicle.py", line 476, in
run_in_terminal_window
tabs = p.findall(out)
TypeError: cannot use a string pattern on a bytes-like object
SIM_VEHICLE: Killing tasks
2018-03-19 12:36:55 +11:00
Peter Barker
b348cfa985
Tools: autotest: flake8 compliance
...
Taking the opportunity to make massive changes while we're destroying
history anyway.
2018-03-15 07:54:21 +09:00
Pierre Kancir
259dda810d
Tools: use base class to share code between vehicle tests
...
Autotest: common.py add new base class and test
Autotest : Common add heartbeat handling on wait_mode timeout
Autotest: common.py add reach_heading_manual and reach_distance_manual
Autotest: new autotest implementation for Rover
Autotest : rover add drive_square test
Autotest: new autotest implementation for Copter
Autotest: new autotest implementation for Plane
Autotest: new autotest implementation for Sub
Autotest: new autotest implementation
Autotest: new autotest implementation for QuadPlane
Autotest : Sub disable GCS_Failsafe on autotest to prevent timeout. The failsafe aren't currently tested on Sub
2018-03-15 07:54:21 +09:00
Peter Barker
b1b978381a
Tools: correct quoting in run_in_terminal_window.sh
2018-03-15 07:40:23 +09:00
Peter Barker
5ac5a68d17
Tools: param_parse.py: replace @PREFIX in values with library prefix
2018-03-14 15:44:00 +11:00
chobits
9405c19e85
Tools: fix copter propeller animation in FlightGear multiplayer
2018-03-14 09:42:55 +09:00
Pierre Kancir
b3c2e134f9
Autotest: raise set_rc timeout to prevent mavproxy to miss msg on speedup
2018-03-13 08:40:05 +09:00
Pierre Kancir
4558ef5b1e
Autotest: correct Rover expected name in banner
2018-03-13 07:53:41 +09:00
Peter Barker
8b9ce3869c
Tools: add bisect-helper.py
...
This is the start of a tool to help bisect problems with ArduPilot.
Currently it only helps bisect build errors.
2018-03-09 10:38:48 +11:00
Peter Barker
18135b4764
Tools: build-with-disabled-features: update deps
2018-02-27 07:43:13 +09:00
Peter Barker
67257e545e
Tools: add how-to-use comment to build-with-disabled-features
2018-02-22 10:18:44 +10:00
Peter Barker
705e6287b9
Tools: add a build-with-disabled-features script
2018-02-22 10:18:44 +10:00
Pierre Kancir
fe36c09bb0
Tools: correct Gazebo-iris param
2018-02-14 09:45:25 +09:00
Peter Barker
50ccbb5d0c
Tools: autotest: correct speedup parameter handling
2018-02-13 17:15:05 +11:00
Peter Barker
aeb99c675b
Tools: autotest: remove racey mavproxy.expect
...
The autopilot could well have emitted the statustext before we
start to expect() it
2018-02-13 17:15:05 +11:00
Siddharth Purohit
8f074d52c1
autotest: fix setup of sitl for macosx
2018-01-31 12:22:23 +11:00
Andrew Tridgell
ec81f905f4
autotest: added some new locations for testing
2018-01-15 11:46:02 +11:00
Stephen Dade
aa7389b455
Tools: Fixed Cygwin SITL package names and made install easier for new users
2018-01-09 14:40:43 +00:00
Peter Barker
8a15c69aff
Tools: add --fresh-params option to sim_vehicle.py
...
This will rebuild and use the XML file we generate from our
source code which conveys information about our parameters.
When using this option, "param help PARAMETERNAME" should reflect
changes made to the parameter metadata for PARAMETERNAME.
2018-01-08 14:49:35 +00:00
Patrick José Pereira
560d8b88d8
Tools: Add gazebo-bluerov2 on vehicleinfo.py
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2017-12-26 09:12:56 +11:00
Patrick José Pereira
0e6fc54a0e
Tools: Add BATT_MONITOR on sub.parm
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2017-12-21 11:26:51 -05:00
Peter Barker
0b4dcdde35
Tools: param_parse.py: allow whitespace between vehicles
...
Also add sanity check that the vehicles you're limitting to we know
about
2017-12-16 11:08:35 +11:00
Peter Barker
d1128e7be4
Tools: param_parse.py: replace comments with debug statements
2017-12-16 11:08:35 +11:00
Peter Barker
eeb15d7fd5
Tools: param_parse.py: make comment consistent
2017-12-16 11:08:35 +11:00
Peter Barker
825832be93
Tools: param_parse.py: add a map for vehicle name to a true-name to be used in code
...
Where true-name is something like "Rover" and the normal name remains
the directory name (e.g. "APMrover2")
2017-12-16 11:08:35 +11:00
Peter Barker
e0125a68e7
Tools: param_parse.py: use single regex for params everywhere
2017-12-16 11:08:35 +11:00
Peter Barker
a45ab6b84c
Tools: param_parse.py: correct example comment
2017-12-16 11:08:35 +11:00
Peter Barker
94afaebdb7
Tools: autotest builds each vehicle parameters individually
2017-12-16 11:08:35 +11:00
Peter Barker
ea2c156c7f
Tools: param_parse.py: understand tagging of parameters for specific vehicles
2017-12-16 11:08:35 +11:00
Peter Barker
8c516fb29c
Tools: autotest: add max-alt fence
2017-12-13 10:04:50 +09:00
Randy Mackay
19af2f7d1d
Tools: add decibel as valid param Unit
2017-12-12 07:59:41 +09:00
Andrew Tridgell
20d44136b0
autotest: fixed handling of core files
2017-12-12 08:45:56 +11:00
Peter Barker
75e8424e3f
Tools: autotest: add a test for driving a simple RTL mission
...
In particular, we weren't setting NAV_CONTROLLER_OUTPUT.wp_dist
correctly before a recent commit from Randy
2017-12-09 22:34:07 +11:00
khancyr
fac89ed437
Tools: autotest: move common functionality to common.py
...
Tools: don't need to pass option on first mavproxy
Tools: reformat common.py and add commun function
Tools: use new common functions
Tools: move functions from rover to commun and reorder
Tools: add and use set_rc function with timeout
Tools: fix style for pep8
2017-12-02 22:28:22 +11:00
Guglie
42e5b180cb
Tools: fix sim_vehicle.py terminal tab when using --no-mavproxy
2017-12-02 09:34:10 +11:00
Peter Barker
b7a293ca5f
Tools: autotest: move fetching of banner and version
...
Moved these to before log download.
They fail randomly after log download.
2017-11-28 09:47:46 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas
5c07a44a6d
Tools: Fix a race condition on the regression tests on Windows
...
Added \r\n to the expect() string as recomended at:
http://pexpect.readthedocs.io/en/stable/overview.html#find-the-end-of-line-cr-lf-conventions
this should work on both windows and linux systems
pexpect says it will always do a minimal (non greedy) matching and docs explicitly say that a .+ expression will always return only one character. These lines in autotest are looking for \S+, which, believing the documentation, would only return one character of the log file path.
Now we know that's not true, neither for Linux or for Windows (given the logs from @karthikdesai), so I can only assume that it does a greedy match but only for the characters it has received at the time expect is called.
Apparently, in the machines we are using autotest, it isn't a problem since MAVProxy is likely fast to give its output to pexpect before the expect method is called. On @karthikdesai's machine that wasn't happening since his machine was more or less loaded.
Concluding, this looks like a correct fix in the sense that it extends the regex pattern to wait for the end of line (and probably other places could benefit from it too).
2017-11-22 17:01:05 +09:00
Patrick José Pereira
df6d2659ac
autotest: Add RAT Beach for ArduSub
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2017-11-20 17:27:47 +09:00
Peter Barker
2f76f83ab7
Tools: autotest: add and use progress function
...
Based on work done by khancir
(https://github.com/ArduPilot/ardupilot/pull/6360 )
Tools: arduplane.py change print to progress function
Tools: quadplane.py change print to progress function
Tools: ardusub.py change print to progress function
2017-11-14 16:02:05 +11:00
Pierre Kancir
76bb081d60
Tools: autotest: add python headers to scripts
...
Tools: arduplane.py add python header
Tools: apmrover2.py add python header
Tools: arducopter.py add python header
Tools: ardusub.py add python header
Tools: quadplane.py add python header
2017-11-14 14:47:32 +11:00
Andrew Tridgell
bf9779b63a
autotest: default plane simulator to 'plane'
...
this is good enough for most people and avoids an external dependency
2017-11-06 15:44:26 +11:00
guglie
e741cb28d2
fix wait_unlimited with an infinite sleep loop
...
this fixes issue #7180
2017-11-06 13:39:59 +11:00
Andrew Tridgell
d55b66efe1
autotest: added HMAS location
2017-10-31 18:02:52 +11:00
Peter Barker
8c03425f37
Tools: enable INS batch logging during Rover autotest
2017-10-27 16:33:45 +11:00
Peter Barker
c498f17bc8
Tools: autotest: fix apmrover2 race condition on banner
2017-10-26 17:20:38 +11:00
Peter Barker
93810ab42a
Tools: sim_vehicle.py: clarify comment about vagrant and mavlink-out
2017-10-26 15:03:58 +11:00
Peter Barker
89fa44a224
Tools: sim_vehicle.py: flake8 compliance
2017-10-26 15:03:58 +11:00
Peter Barker
163b354448
Tools: autotest: rover: add test for braking
2017-10-26 14:45:19 +11:00
Peter Barker
47ffad7cdc
Tools: autotest: copy generate_manifest aside for build_binaries.py
2017-10-26 07:57:48 +11:00
Peter Barker
e3320ca953
Tools: autotest.py: run build_binaries.py instead of build_binaries.sh
...
Note we still copy the script sideways. This is probably not
required for a python script.
2017-10-25 12:02:19 +11:00
Andrew Tridgell
b88f2f1da3
autotest: fixed exception in convertgpx
2017-10-22 16:26:24 +11:00
Andrew Tridgell
71e2c86783
autotest: added more CMAC startup locations
...
this allows matching to RealFlight positions
2017-10-21 13:01:07 +11:00
Andrew Tridgell
776355ef2b
autotest: fixed heli test
...
need to wait for motor runup
2017-09-27 20:54:21 +10:00
Peter Barker
5a19301606
Tools: autotest: add a test for setting of modes using CMD_DO_SET_MODE
2017-09-19 01:24:11 +01:00
mirkix
6bc4ab638a
Tools: Add SITL tilthvec frame and default parameters
2017-09-18 21:20:39 +10:00
Peter Barker
27650c08aa
Tools: autotest: use -z in place of -v for checking variable settedness
...
Some bash versions out there don't like -v
2017-09-18 08:26:22 +10:00
Peter Barker
78a0298af0
Tools: autotest.py: look at EKF flags to determine armability
2017-09-15 15:57:11 +01:00
Marco Robustini
b4f46b14f0
Tools: add Marco's flying field to locations file
2017-09-11 17:58:01 +01:00
Peter Barker
20bfb82a7b
Tools: autotest.py: add --no-clean and --no-configure options
2017-09-11 12:45:27 +10:00
Peter Barker
e505635ddd
Tools: sim_vehicle: make gdb-stopped work again
2017-09-11 12:30:00 +10:00
Peter Barker
2738fc34f0
Tools: autotest.py: exit if step not matched
...
Also, stop shadowing a variable
2017-09-08 21:51:26 +10:00
Peter Barker
6928618de8
Tools: autotest.py: allow specification of a buildlogs directory
2017-09-01 23:39:38 +10:00
Luis Vale Gonçalves
c046824ce7
Added our testing location
...
Added testing location at Tagus Park, Oeiras, Portugal
2017-08-31 14:16:10 -07:00
Peter Barker
f0096d3c7a
Tools: apmrover2.py: add a test for MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES
2017-08-30 15:54:47 +01:00
Peter Barker
324d9f3c7d
Tools: apmrover2.py: add a test for MAV_CMD_DO_GET_BANNER
2017-08-30 15:54:47 +01:00
Peter Barker
1b7122d733
Tools: add a --speedup parameter to autotest to control speed of all sims
2017-08-29 22:49:40 +01:00
Francisco Ferreira
2645760d19
Tools: sim_vehicle.py: fix small bug introduced in e298e87
...
Thanks to @cclauss for finding this
2017-08-29 12:16:23 +01:00
Peter Barker
e298e87791
sim_vehicle: add --callgrind option
2017-08-28 13:47:27 +01:00
Peter Barker
24e616af7d
Tools: autotest.py: factor write_fullresults
2017-08-26 17:54:32 +01:00
Peter Barker
0334cc1c88
Tools: correct copter's fly_throttle_failsafe failure case
2017-08-26 09:36:09 +10:00
Francisco Ferreira
415cb41c7f
Tools: add gdbserver option to Rover autotest
...
commit 38297c4
missed changing Rover file
2017-08-25 02:38:12 +01:00
Peter Barker
a7b919f025
Tools: do not attach gdb to gdbserver unless --gdb is given
2017-08-24 21:37:06 +10:00
Miguel Arroyo
38297c4d19
Tools: Adds GDBServer with screen option for debugging
2017-08-24 21:37:06 +10:00
khancyr
db3c387916
Tools: update relay pins for brushed motors in SITL
2017-08-24 20:10:32 +09:00
Andrew Tridgell
f5d91f63d2
autotest: fixed firefly parameters
2017-08-20 09:37:00 +10:00
khancyr
e116ec4eb0
Rover: update SITL parameters
2017-08-17 09:47:39 +09:00
Randy Mackay
7df73c50e8
SITL: remove unnecessary THR_MAX parameter default
2017-08-17 09:39:40 +09:00
Jacob Walser
8121091fb6
Sub: Don't configure RC params in SITL
2017-08-16 11:37:46 -04:00
Randy Mackay
9b63c8751f
SITL: rover default params in alphabetical order
2017-08-15 20:47:19 +09:00
Randy Mackay
1582bd85af
SITL: update rover default parameters
2017-08-15 20:47:19 +09:00
Peter Barker
a2af13c17e
Tools: calibrate SITL sub RC in autotest's sub parameters
2017-08-14 15:32:25 +09:00
Daniel Orbach
3c66663880
Tools: autotest.py: Squashed the code for default.* steps in run_step().
2017-08-14 12:16:29 +10:00
Daniel Orbach
91e25bb937
Tools: autotest.py: Made use of shutil.copy2() where appropiate.
2017-08-14 12:16:29 +10:00
Daniel Orbach
befd8b028b
Tools: autotest.py: Moved all imports to top of file.
2017-08-14 12:16:29 +10:00
Daniel Orbach
e951df7d50
Tools: autotest.py: Simplified binary_path through lookup table
2017-08-14 12:16:29 +10:00
Daniel Orbach
29ab76e714
Tools: autotest.py: Slightly cleaned up run_tests.
2017-08-14 12:16:29 +10:00
Daniel Orbach
04791139c0
Tools: autotest.py: Separated function definitions and script code.
2017-08-14 12:16:29 +10:00
Peter Barker
2437260f8a
Tools: copter horizontal fence test waits for disarm then rearms
2017-08-04 17:44:43 +01:00
Peter Barker
dd09bb338e
Tools: wait for vehicle to disarm after handling throttle failsafe
2017-08-04 17:44:43 +01:00
Andrew Tridgell
224dc439ab
Tools: updated parameters to remove ELEVON and VTAIL settings
2017-08-01 08:25:32 +10:00
Andrew Tridgell
2fb94597ba
autotest: adjust default params for new mixing
2017-08-01 08:25:32 +10:00
Peter Barker
c383d64954
Tools: ardusub.py: increase timeout to allow Valgrind to pass
2017-07-20 15:45:15 +10:00
Francisco Ferreira
eda5d9265f
Tools: add new no-emit option to param_parse.py so that only validation is done
2017-07-18 14:15:39 +01:00
Michael du Breuil
31924e46d3
Tools: Parameters: Permit kHz as a unit
2017-07-16 08:26:52 +10:00
khancyr
5c8b8cc9a1
Tools: update rover skid param
2017-07-08 16:07:13 +09:00
Peter Barker
86d8252166
Tools: correct sim_vehicle's --tracker option
2017-07-07 16:18:37 +01:00
Peter Barker
84e4e282f0
Tools: autotest: use copter-single for most of copter-coax parameters
2017-07-05 17:34:09 +01:00
Peter Barker
a6de3b6865
Tools: use heli params for most of heli-dual params
2017-07-05 17:34:09 +01:00
Peter Barker
791b1f43e9
Tools: allow heli autotest to use different frame
2017-07-05 17:34:09 +01:00
Peter Barker
9948bed2a2
Tools: use rover params for most of rover-skid params
2017-07-05 17:33:32 +01:00
Peter Barker
cb81f9c8b3
Tools: allow Rover to use inheritted config files
2017-07-05 17:29:55 +01:00
Peter Barker
59647b3434
Tools: autotest: correct Copter params file handling
2017-07-05 17:29:55 +01:00
Andrew Tridgell
392d990950
autotest: added dspoiler parameters for plane
...
and simplify vtail and elevon parameters
2017-07-03 11:17:42 +10:00
khancyr
71bb0b24ed
Autotest: remove SKID_STEER_OUT from default param
2017-06-28 18:53:51 +01:00
Peter Barker
34e611be59
Tools: autotest: wait for plane to disarm before downloading logs
2017-06-27 03:10:43 +01:00
Peter Barker
05ea121d0c
Tools: autotest: disarm rover before downloading logs
2017-06-27 03:10:43 +01:00
Pierre Kancir
4270bac49e
Rover: update default param file for new skid steering
2017-06-24 13:17:34 +09:00
Randy Mackay
74f5ddb823
SITL: add copter-beacon parameter file
...
This allows easier testing of the Beacon code in SITL
2017-06-20 20:42:36 +09:00
Jacob Walser
b752594fe5
param_metadata: Markdown parameter formatter
2017-06-20 14:53:17 +10:00
Stephen Dade
b6816285e5
Tools: APM source is not required to be in Cygwin dir
2017-06-14 18:03:25 +01:00
Pierre Kancir
c25c92bfb6
Params: add battery monitor for SITL rover and gazebo
2017-06-07 20:29:02 +10:00
Andrew Tridgell
228cba2524
autotest: fixed default frame type in sim_vehicle.py
2017-06-02 16:53:55 +10:00
hrykyn
b09ebbb891
autotest: add locations
...
adding location of Hata-drone-field, JAPAN
2017-05-28 07:30:53 -07:00
murata
75e770c83c
Tools: add support for dodeca-hexa
2017-05-27 14:21:13 +09:00
Peter Barker
2ddf7f99b5
Tools: autotest: option to run different frame
2017-05-26 16:53:07 +09:00
Peter Barker
96cfba971c
Tools: vehicleinfo: factor out a default_frame method
2017-05-26 16:53:07 +09:00
Peter Barker
3a9ac2ef40
Tools: pull out vehicle metadata into a library
2017-05-26 16:53:07 +09:00
Pierre Kancir
971c8d5948
Tools: use parm inheritance for gazebo iris model
2017-05-25 10:02:32 +10:00
Peter Barker
d1fb2e7c53
Tools: use parm inheritance for copter models
2017-05-25 09:58:53 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas
023e3b6e30
Tools: Add comments explaining why a couple of units are not SI
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas
02e7c49394
Tools: remove non-ASCII characters in comments, Travis chokes on them
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas
d7c7deacdf
Tools: Follow SI units conventions
...
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
http://www.bipm.org/en/publications/si-brochure/
http://www1.bipm.org/en/CGPM/db/3/2/ g_n unit for G-force
one further constrain is that only printable (7bit) ASCII characters are allowed
Add a validation so that Travis can validate the units
Use full text unit information when generating .wiki, .rst and .html documentation
Use both unit symbol and unit full text when generating .xml
2017-05-17 18:07:25 +10:00
Miguel Arroyo
d9546523a3
Tools: sim_vehicle.py fix for Python 3
2017-05-17 11:15:34 +10:00
Peter Barker
ca5bf02d7c
autotest: quote words as they go into generated ritw file
2017-04-29 11:31:26 +10:00
Peter Barker
e90c62ffc6
autotest: run_in_terminal_window gets SITL_RITW_MINIMIZE
...
This is handy when running gdb repeatedly; don't
need to find the iconified window all the time.
2017-04-26 14:12:10 +10:00
Andrew Tridgell
4240d3f739
Autotest: support tilttri-vec quadplane
2017-04-24 16:54:41 +10:00
Pierre Kancir
d4bd61d859
APMRover2: unhide default NAVL1_PERIOD with a define
...
set the correct value to param
2017-04-15 13:48:40 +10:00
Stephen Dade
78d1ea4727
SITL: Added missing files to win_sitl and removed -j4
2017-04-10 10:09:18 +10:00
Stephen Dade
024c91de20
SITL: Added setup scripts for Windows (Cygwin) users
2017-04-10 10:09:18 +10:00
Andrey Kolobov
a8b36a9be8
autotest: An X-Plane soaring mission file
2017-04-08 20:01:33 +10:00
Andrey Kolobov
c06cfc84ff
autotest: Parameter file for an X-Plane RC sailplane model called Vee-gull 005
2017-04-08 20:01:21 +10:00
Jacob Walser
b1906d6c04
autotest: (Sub) only execute one circle instead of four
2017-04-07 14:47:48 -04:00
Jacob Walser
82cebe47dc
autotest: (Sub) dont wait_alititude after mission
2017-04-06 14:06:46 -04:00
Jacob Walser
52d2ccaa29
autotest: Fix Sub RCInput channels
2017-04-06 13:52:29 -04:00
Jacob Walser
2940673994
default_params: (Sub) Remove old parameters from defaults file
2017-04-05 13:29:06 -04:00
Guilherme Sousa
b20b0fbbd3
default-params: Added parameter files for octa and octa-quad
2017-03-29 22:43:14 +11:00
Guilherme Sousa
442715ab1b
autotest: Added new frame parameters for hexa, octa and octa-quad options
2017-03-29 22:43:14 +11:00
Guilherme Sousa
30dc71547e
default_params: Added parameters for hexa testing in SITL
2017-03-29 22:38:11 +11:00
Andrew Tridgell
8387e1e69c
autotest: added parameters for heli-dual model
2017-03-25 16:22:10 +11:00
Andre Kjellstrup
bc8a212b68
one SITL location corrected
2017-03-23 14:24:43 -07:00
Pierre Kancir
1bb4e3c9b7
AP_IRLock_SITL: make port variable
2017-03-18 19:58:11 +11:00
Pierre Kancir
fb79c96448
sim_vehicle.py: add gazebo rover
2017-03-18 19:58:11 +11:00
Andre Kjellstrup
7c817b2761
Adding SITL locations
2017-03-16 16:35:43 +01:00
Warren Eather
c2c69702ba
Update locations.txt
2017-03-15 22:20:49 +11:00
GuillermoGuevara
c2905fc7f6
Update
...
Is it better this way :)
2017-03-14 21:29:28 +01:00
Jacob Walser
8c64728ffd
autotest: Add auto mission to Sub autotest
2017-03-10 15:46:30 +11:00
Jacob Walser
2c4e6a8fb6
web-firmware: Add Sub link to firmwares page
2017-03-01 14:44:55 +11:00
Jacob Walser
ec15f0fee5
autotest: Add Sub
2017-02-25 17:50:18 +11:00
Peter Barker
3f7d58fe2c
sim_vehicle.py: allow a list of defaults files to be specified
2017-02-23 22:46:33 -08:00
Peter Barker
64d4e094fb
Tools: sim_vehicle.py: correct formatting (NFC)
2017-02-23 11:07:37 +11:00
Peter Barker
b256bc1dc0
Tools: sim_vehicle.py: add a warning when frame not found
...
We don't always have configuration for a frame type, but
it is atypical to run sim_vehicle like that.
2017-02-23 11:07:37 +11:00
Peter Barker
3be8c1e70b
Tools: sim_vehicle.py: move metadata into _options
...
This centralises configuration information in _options and
removes duplication of data
2017-02-23 11:07:35 +11:00
Peter Barker
fec23f6abe
Tools: sim_vehicle.py: print possible frame types in help message
2017-02-23 11:07:05 +11:00
Peter Barker
dd9de7dfb5
Tools: sim_vehicle.py: improve help about vehicle types
2017-02-23 11:06:28 +11:00
Peter Barker
aec7091faa
autotest: Add support for Sub in sim_vehicle.py
2017-02-21 11:26:14 +11:00
Andrew Tridgell
41b9d7c2c9
autotest: added tailsitter parameters
2017-02-18 17:31:10 +11:00
Andrew Tridgell
94fb390bda
autotest: added sim_vehicle.py support for tailsitter
2017-02-18 17:26:43 +11:00
Pierre Kancir
332735d2ee
SITL: update default param for skid steer rover
2017-02-16 09:45:08 +11:00
Andrew Tridgell
496ed18530
autotest: sort libraries by name
2017-02-07 10:37:24 +11:00
Pierre Kancir
38b6ced640
Tools: sim_vehicle add option to disable mavproxy launch && better exit handling
2017-02-06 11:35:54 +01:00
Andrew Tridgell
2bb3d395cf
autotest: setup for firefly6 quadplane parameters
2017-02-06 16:18:58 +11:00
Andrew Tridgell
de59f27e14
autotest: fixed parameter generation for recursive libraries
2017-02-06 15:12:32 +11:00
Pierre Kancir
a6c82a0919
SITL: add an option to launch SITL from a directory
2017-02-02 04:26:37 +00:00
Peter Barker
817efe9b6d
Tools: expect message for EKF readiness rather than sleeping
...
This solves a problem for me when running Valgrind as
30s was not sufficient
2017-01-26 16:53:13 +11:00
Andrew Tridgell
715db62a85
autotest: added quadplane-cl84 support
2017-01-25 19:01:15 +11:00
Andrew Tridgell
19b21b4012
autotest: fixed quadplane-tilttri params
2017-01-22 19:43:42 +11:00
Andrew Tridgell
b27e4dbd0c
autotest: added FRAME_CLASS for gazebo-iris
2017-01-20 21:19:55 +11:00
Randy Mackay
0b85921505
Tools: update param file for sitl optflow testing
2017-01-16 16:40:34 +09:00
Andrew Tridgell
e52cff3f0b
autotest: fixed throttle range for default parameters
2017-01-13 08:36:26 +11:00
Andrew Tridgell
978d32ff12
autotest: fixed JSBSim plane defaults
2017-01-12 21:30:17 +11:00
Andrew Tridgell
a56090113c
autotest: fixed sim_vehicle.py with -f heli
2017-01-12 17:39:37 +11:00