Commit Graph

213 Commits

Author SHA1 Message Date
Peter Barker 4ffd38f6bb Copter: GCS_MAVLink uses dataflash singleton 2018-12-11 08:43:47 +09:00
Peter Barker 73940df48e Copter: move mission into mode_auto 2018-11-09 13:35:40 +09:00
Michael du Breuil 0f636db159 Copter: Make capability init consistent 2018-11-05 14:04:36 +11:00
Peter Barker ec6c59faa3 Copter: move handling of disable-gcs-rc-overrides-channel-option up 2018-09-05 11:54:32 +10:00
Michael du Breuil 433f01ddf0 Copter: Remove unneeded ServoRelayEvent mask set 2018-08-20 21:31:06 -07:00
Peter Barker e7e56dde7a Copter: move handling of RC switches into RC_Channel 2018-08-01 12:11:30 +09:00
Michael du Breuil 858b51c927 Copter: Update notify initilization 2018-08-01 09:22:09 +10:00
Lucas De Marchi 1a45aa12f5 AP_Param: warn on last pass only about unknown parameters
Do not warn about unknown parameters on the first pass, i.e. when
AP_Param:load_all() is called. This is because we may still not know
about dynamically loaded parameters. When we call the second (last)
time, we expect to already know all possible parameters, so print a
warning to both console and the debug terminal.
2018-06-28 10:18:19 -07:00
Andrew Tridgell 20dea6df45 Copter: moved OSD to top level params
this gives us plenty of param depth for a complex param tree
2018-06-27 14:55:00 +10:00
Alexander Malishev f63b3c044a Copter: added OSD support 2018-06-27 14:55:00 +10:00
Peter Barker 70d159cb38 Copter: raise EKF failure even if USB is connected
This will let EKF go bad if your PixHawk is connected to your laptop.
This doesn't seem to be a problem for the other vehicles.

This also allows the EKF to go bad in-flight if you happen to have
connected (against AP's recommendations) your companion computer to your
flight controller via USB.  Since people do this, it is better to have
the checks than not.
2018-06-26 10:07:55 +10:00
Peter Barker 485cafb343 Copter: use AP_FWVersion singleton 2018-06-18 19:10:37 +01:00
Peter Barker 7015d42ab2 Copter: Location gets ahrs from singleton 2018-06-01 16:18:33 +01:00
Randy Mackay c85bae8d88 Copter: correct dodeca-hexa copter mav-type 2018-04-27 14:57:00 +09:00
night-ghost 51a189e906 ArduCopter: devo telemetry support (RX705/707) 2018-04-24 10:44:28 +10:00
Peter Barker c95ff96263 Copter: Baro does its own dataflash logging 2018-04-12 19:12:12 +01:00
Andrew Tridgell 1ffe75957e Copter: fixed ESC calibration for DShot 2018-04-07 09:10:29 +10:00
Randy Mackay 59e4749fd0 Copter: integrate AC_Loiter
includes param conversion
2018-04-04 10:45:10 +09:00
Peter Barker 0c8110ecb2 Copter: factor vehicle's mavlink send_heartbeat 2018-04-03 13:05:19 +01:00
Peter Barker d58e2214d2 Copter: tidy handling of barometer calibrations 2018-04-02 23:25:05 +01:00
Peter Barker cca4d5136e Copter: move common calibration functions up 2018-04-02 23:25:05 +01:00
Dr.-Ing. Amilcar do Carmo Lucas d633ba8c46 Copter: Add option to disable RPM module 2018-03-30 09:36:48 +09:00
Michael du Breuil 291531e056 Copter: Support new battery failsafes 2018-03-27 22:12:21 +01:00
night-ghost a1797beb41 Copter: removed 1ms delay on startup
handled by GCS library now, not needed here
2018-03-20 10:08:20 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas ed36ec3c29 Copter: add option to disable THROW mode 2018-03-15 07:38:14 +09:00
Andrew Tridgell cf00bd99ea Copter: enanle RC override by default 2018-03-02 12:52:50 +11:00
night-ghost adcc309f15 Copter: allow AP_Stats to be optional 2018-03-02 07:23:35 +11:00
Peter Barker b8e1f03599 Copter: add define for disabling beacon 2018-02-27 07:43:13 +09:00
Peter Barker 5b355214fd Copter: add option to disable CIRCLE flight mode
Saves about 2.4kB of flash
2018-02-27 07:43:13 +09:00
Peter Barker 9b440d6b25 Copter: add option to disable SmartRTL mode
Saves 5.5k of Flash
2018-02-27 07:43:13 +09:00
Peter Barker b9ad2bc8db Copter: add option to disable AUTO mode
Saves ~12k of flash
2018-02-27 07:43:13 +09:00
Peter Barker 1a68979050 Copter: correct nullptr check for circle nav allocation 2018-02-22 16:14:50 +10:00
murata 6f20c6a97b Copter: Set the loop rate of G_dt as a variable. 2018-02-20 10:51:20 +11:00
Andrew Tridgell 00ec3efb48 Copter: initialise G_Dt to 1.0/400 2018-02-13 17:15:05 +11:00
Randy Mackay eefa629039 Copter: remove setting accel_z PID controller's dt
This is handled from within the pos controller
this commit can be merged with Copter: move pos-control pids to pos-control library
2018-01-23 12:00:43 +09:00
Randy Mackay 8d6f8e4d9c Copter: move pos-control pids to pos-control library 2018-01-23 12:00:43 +09:00
Randy Mackay 6546ccbb3f Copter: velocity pi moved to position control library 2018-01-23 12:00:43 +09:00
Peter Barker 996115c0d3 Copter: eliminate MAIN_LOOP_SECONDS macro 2018-01-20 15:35:58 +11:00
Peter Barker 7b637334f4 Copter: eliminate mode_has_manual_throttle 2017-12-06 10:09:58 +09:00
Peter Barker 527a536b78 Copter: FlightMode - remove function parameters
Use current control_mode in place of parameters

Once conversion is complete these functions will disappear
2017-12-06 08:24:24 +09:00
Randy Mackay 787954fa37 Copter: integrate winch library
fixes after peer review:
rename winch-disable to winch-relaxed
add DO_WINCH to do-verify
winch release-length accepts rate
2017-10-27 09:20:38 +09:00
Andrew Tridgell 18f04abfe8 Copter: added HELI_QUAD 2017-10-03 10:16:41 +11:00
Lucas De Marchi f5c2ffffb9 global: remove DataFlash from AP_Mount::init() 2017-09-26 03:01:21 +01:00
Lucas De Marchi 4ef5186733 ArduCopter: do not include version.h/ap_version.h
The interface provided by each vehicle should be used to get the
version.
2017-09-23 21:37:45 -07:00
Randy Mackay 44a436642b Copter: complete rename to SmartRTL
Also fix parameter description for CH7_OPT
2017-09-15 08:58:14 +09:00
squilter 4b57a4a231 Copter: rename SafeRTL to SmartRTL 2017-09-09 14:05:41 +09:00
Randy Mackay 6684e3de56 Copter: minor comment change for SafeRTL 2017-09-09 14:05:41 +09:00
squilter ba0e08552f Copter: add SafeRTL flight mode 2017-09-09 14:05:41 +09:00
Peter Barker 470e790117 Copter: add constant structure holding firmware version 2017-08-30 15:54:46 +01:00
Peter Barker 89e6e70235 Copter: remove MAIN_LOOP_RATE in favour of parameter value 2017-08-29 08:41:07 +09:00
Peter Barker b0c7766197 Copter: continuously reevaluate rc calibration checks
Stop "latching" calibration checks - if an RC radio's calibration
changes after it passes once, these patches allow the rc calibraiton
checks to then fail.
2017-08-21 09:05:31 +09:00
Peter Barker c6b9c84d1f Copter: remove CLI 2017-08-14 10:23:50 +09:00
Randy Mackay 8dadbaa850 Copter: landing gear init on startup 2017-08-05 11:20:41 +09:00
Peter Barker e45efeb829 Copter: move starting of new logs into DataFlash 2017-07-19 16:37:28 +01:00
Peter Barker f60389d4aa Copter: use send_text method on the GCS singleton 2017-07-09 17:17:29 -04:00
Peter Barker d9b45cc202 Copter: create GCS subclass, use inheritted methods 2017-07-07 16:18:37 +01:00
Eugene Shamaev 24c390ade0 ArduCopter: move of CAN parameters into separate group 2017-07-03 11:44:32 +01:00
Peter Barker 37abc1b02f Copter: check dataflash to see if we should log backend gps messages 2017-06-29 15:43:38 +01:00
Peter Barker 776d691c79 Copter: use DataFlash should_log to determine raw logging 2017-06-29 15:26:27 +01:00
Peter Barker cfbde937c6 Copter: move should_log check of log bitmask into DataFlash 2017-06-29 15:26:27 +01:00
Peter Barker 8b57405143 Copter: handle knowledge of in_log_download in DataFlash 2017-06-27 03:10:43 +01:00
Andrew Tridgell ba21c1e67d Copter: set RC_SPEED default to 16kHz for brushed 2017-06-17 17:37:45 +10:00
Peter Barker 4163455d97 Copter: stop using in_mavlink_delay as a proxy for disabling logging 2017-06-16 17:07:48 +01:00
Peter Barker cb41f09d2e Copter: call dataflash should_log method 2017-06-16 17:07:48 +01:00
Peter Barker 3ee56f5475 Copter: StartUnstartedLogging replaces logging_started/start_logging 2017-06-11 20:34:12 +01:00
Peter Barker 43a16b9327 Copter: simplify should_log (NFC) 2017-06-11 20:34:12 +01:00
Randy Mackay ec491d3c6b Copter: init_compass get g.compass_enabled check
No functional change
2017-06-07 10:34:13 +09:00
murata 1a76c28655 Copter: add dodeca-hexa 2017-05-27 14:21:13 +09:00
Randy Mackay 70ed572476 Copter: minor formatting fix
This is mostly just to trigger compilation of the latest beta
2017-05-25 17:53:20 +09:00
Randy Mackay 91d4b4777b Copter: respond to param list request after motor init 2017-05-15 14:13:43 +09:00
karthik.desai d7976078a5 Copter: fix typo in comments 2017-05-08 10:08:31 +09:00
Peter Barker 069e0d1973 Copter: move init of DataFlash references into vehicle init
It is possible to start a log before the existing codepath is crossed.
2017-05-01 15:04:34 +01:00
Andrew Tridgell 10b89db498 Copter: call BoardConfig.init_safety() at end of startup
this fixes a bug where motors can start on soft reboot
2017-04-30 21:47:04 +10:00
Randy Mackay 713c08672f Copter: integrate AP_VisualOdom 2017-04-19 11:04:40 +09:00
Randy Mackay 1bfbf0d43f Copter: enable motors at end of initialisation 2017-04-18 09:29:51 +09:00
Andrew Tridgell 6bb5c16fb8 Copter: allow for HELI_DUAL configurations 2017-03-25 16:22:10 +11:00
Andrew Tridgell 54b852ebfe Copter: fixed var table loading for heli single parms
we were not loading parameters such as the swash angle
2017-03-15 11:31:45 +11:00
Andrew Tridgell f1917dddd0 Copter: changes for AC_WPNav 2017-02-18 17:26:43 +11:00
Andrew Tridgell 92fdef5b97 Copter: changed for AP_AHRS_View on AC_AttitudeControl 2017-02-18 17:26:43 +11:00
Andrew Tridgell aad412eaef Copter: support tailsitter frame class 2017-02-18 17:26:43 +11:00
Andrew Tridgell 3cb88d0a23 Copter: added tailsitter frame support 2017-02-18 17:26:43 +11:00
Andrew Tridgell 6b6d03eb8d Copter: fixed upgrade of parameters
now that we dynamically allocate many key objects in copter we need to
move the parameter upgrade code to after when the objects are allocated
2017-02-15 15:02:06 +10:00
Andrew Tridgell d8972d5344 Copter: setup frame type parameter flags 2017-02-14 19:50:01 +11:00
Peter Barker 029aeeb4fd Copter: support for a GCS singleton 2017-02-13 09:32:01 +11:00
Peter Barker f49f153da0 Copter: rename gcs[] to gcs_chan[]
Wish to use gcs() to return the gcs singleton
2017-02-13 09:32:01 +11:00
murata 8f926bd177 Copter: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
Randy Mackay 26919b4ab6 Copter: send flight mode string to Notify 2017-01-23 15:07:20 -08:00
Andrew Tridgell 332820aa88 Copter: fixed load of var_info for attitude_control and motors
we need to pass the var_info for the specific class we are using, not
the parent class.

Fixes issue #5585

thanks to Julien for noticing!
2017-01-20 12:05:09 +11:00
Andrew Tridgell 1297a7dedb Copter: convert the rest of motors class for tricopter 2017-01-12 17:39:37 +11:00
Andrew Tridgell bf889e01e1 Copter: load objects from storage after allocation 2017-01-12 17:39:37 +11:00
Andrew Tridgell 3fe1a69a32 Copter: always allocate a motors backend
this allows autotest to run, and gives a less confusing error to users
when no FRAME_CLASS error is selected
2017-01-12 17:39:37 +11:00
Andrew Tridgell e85df47b06 Copter: fixed parameter handling for pointer objects
fixed loading of default files and use of POINTER flag on object
groups
2017-01-12 17:39:37 +11:00
Andrew Tridgell 0f6d0c5ba9 Copter: combined tri, single, coax and multicopter into a single build
this allows copter to be just 2 builds, one for heli, and one for
everything else
2017-01-12 17:39:37 +11:00
Randy Mackay b1e494a209 Copter: return MAV_TYPE as quadcopter by default
This allows the GCSs to know that the firmware is for a multicopter
2017-01-12 09:27:14 +09:00
murata e65887c393
Copter: Change sprintf method to secure snprintf method. 2017-01-09 16:05:56 +00:00
Randy Mackay 6b4acebd26 Copter: bigger buf when sending frame string to frsky telem 2017-01-05 13:45:53 +09:00
Peter Barker a233024e05 Copter: fix compilation when fence andd proximity are disabled
This adds AC_AVOID_ENABLED; avoidance must be disabled if either
of fence or proximity are disabled.

Parameter definitions have been reordered to avoid compiler warnings;
this make sthe numbering non-linear
2017-01-03 10:44:03 +09:00
Randy Mackay e31d6d051d Copter: get_frame_mav_type switch fix
This returns generic as the mavtype and avoids warnings of unreachable code
Thanks to muramura for suggesting this
2016-12-31 10:55:23 +09:00
Randy Mackay 217757fdc8 Copter: default FRAME_CLASS 2016-12-31 10:55:23 +09:00
Randy Mackay 0ac00dbfd6 Copter: add FRAME_CLASS parameter 2016-12-31 10:55:23 +09:00