Commit Graph

14279 Commits

Author SHA1 Message Date
priseborough e2d47f836e AP_TECS: Fix bug causing plane to fly high on landing approach
The introduction of the height rate flare logic caused the demanded height rate to be zero except when a flare manouevre was being performed. This caused the plane to lag behind height changes if the D gain was non-zero, which caused it to fly high during landing approach.
2014-12-14 09:43:46 +11:00
Randy Mackay 43901dce65 Tracker: mavlink component id to 1
The antenna tracker's system id (aka SYSID) should be different from
other vehicles but it's component id should be "1" like copter, plane
and rover.
2014-12-11 21:09:15 +09:00
Randy Mackay b54b7b7448 GCS_MAVLink: fix compiler error 2014-12-11 16:26:26 +09:00
Randy Mackay e581e81da5 AP_NavEKF: reorder declation to fix compiler warning
No functional change
2014-12-11 15:37:56 +09:00
Randy Mackay ddda0d52ce Baro: reorder declaration to fix compiler warning
No functional change
2014-12-11 13:06:24 +09:00
Andrew Tridgell 76c47f56c5 Rover: removed fwd of unknown msg types 2014-12-11 12:32:54 +09:00
Andrew Tridgell 12f0c49915 Plane: remove fwd of unknown msg types 2014-12-11 12:32:52 +09:00
Andrew Tridgell ade7f9e1a9 GCS_MAVLink: fixed forwarding of non-targetted messages 2014-12-11 12:32:50 +09:00
Andrew Tridgell fcf17829cc GCS_MAVLink: fixed addition to routing table 2014-12-11 12:32:48 +09:00
Andrew Tridgell 079158d4b8 GCS_MAVLink: strip out the old GCS_Class class
this is not longer needed as we don't support multiple protocol
classes
2014-12-11 12:32:45 +09:00
Andrew Tridgell 0d2308f754 AntennaTracker: removed old PROXY_MODE parameter
this should not be needed any more
2014-12-11 12:32:42 +09:00
Andrew Tridgell c94e934fdf AntennaTracker: use generic mavlink routing
this replaces the special purpose routing in the AntennaTracker
2014-12-11 12:32:40 +09:00
Andrew Tridgell 41a5f79046 Rover: removed use of mavlink_check_target() 2014-12-11 12:32:38 +09:00
Andrew Tridgell e73f8b8e40 Copter: removed use of mavlink_check_target() 2014-12-11 12:32:34 +09:00
Andrew Tridgell f198cdcf20 GCS_MAVLink: added support for a MAVLink snoop function
this can be used to watch messages for different targets
2014-12-11 12:32:32 +09:00
Andrew Tridgell 34be7f808e GCS_MAVLink: only try to fwd packets to active channels 2014-12-11 12:32:30 +09:00
Andrew Tridgell 411766f45a AP_Mount: removed use of mavlink_check_target() 2014-12-11 12:32:27 +09:00
Andrew Tridgell 4a9331c505 AP_Camera: removed use of mavlink_check_target() 2014-12-11 12:32:24 +09:00
Andrew Tridgell 507117bd8f Plane: removed use of mavlink_check_target() 2014-12-11 12:31:15 +09:00
Andrew Tridgell f1edd1bafb GCS_MAVLink: removed use of mavlink_check_target()
not needed now we do routing properly, as messages will only be
processed if they are for us
2014-12-11 12:31:06 +09:00
Andrew Tridgell aa88ba4158 GCS_MAVLink: only call message handler for our own messages 2014-12-11 12:30:59 +09:00
Andrew Tridgell 11f88f0f5d GCS_MAVLink: added routing object to GCS_MAVLink 2014-12-11 12:30:55 +09:00
Andrew Tridgell b91529622b GCS_MAVLink: initial implementation of MAVLink routing object
will be used to auto-route packets over all available links
2014-12-11 12:30:50 +09:00
Andrew Tridgell 76c710f596 GCS_MAVLink: removed obsolete headers 2014-12-11 12:30:46 +09:00
Andrew Tridgell 3354cb37d0 AP_GPS: fixed vertical velocity in Replay
fixed NavEKF use of velocity velocity
2014-12-09 18:57:17 +11:00
Andrew Tridgell 4a91546ced HAL_PX4: FRAM does not support fsync
the fsync just wastes time reopening /fs/mtd
2014-12-09 14:35:36 +11:00
Andrew Tridgell 068b5a54c9 Replay: prevent float exception in log writing 2014-12-09 12:45:58 +11:00
Randy Mackay f4fc910fea Plane: send OPTICAL_FLOW msg to GCS 2014-12-08 14:58:32 +09:00
Randy Mackay 67f48168a8 Copter: send OPTICAL_FLOW msg to GCS 2014-12-08 14:58:31 +09:00
Randy Mackay da247bacf8 GCS_MAVLink: add OPTICAL_FLOW to ap_message enum 2014-12-08 14:58:30 +09:00
Randy Mackay 2b9bf69c9e Plane: send optflow health in extended status 2014-12-08 14:58:29 +09:00
Randy Mackay 641c770726 Copter: send optflow health in extended status 2014-12-08 14:58:28 +09:00
Randy Mackay 882546aa8e Copter: optflow logging minor format change 2014-12-08 14:58:27 +09:00
Randy Mackay 3127dd94c1 Copter: add OPTFLOW to default logging 2014-12-08 14:58:27 +09:00
Randy Mackay aba829678a Copter: optflow instantiation format change
No functional change
2014-12-08 14:58:26 +09:00
Randy Mackay c93c7af20c Copter: move update_optflow to sensors.pde
No functional change
2014-12-08 14:58:25 +09:00
Randy Mackay 3c23f00e81 OptFlow: remove ADNS3080 image grabber example 2014-12-08 14:58:24 +09:00
Randy Mackay 67fdfffc2a Copter: remove OF_Loiter PIDs and tuning 2014-12-08 14:58:18 +09:00
Randy Mackay 0994529624 Copter: remove OF_Loiter from FLTMODE param descriptions
Also remove OF_Loiter reference in comments
No functional change
2014-12-08 14:57:04 +09:00
Andrew Tridgell fa95ea91fd Replay: generate dataflash logs in Replay
this allows the calculated EKF flight path to be compared with
different parameters by using replay
2014-12-08 11:25:22 +11:00
Andrew Tridgell 193bda068c HAL_Linux: run IO processes when we do a stop_clock()
this has the effect of allowing logging to progress in Replay where we
are running at much more than realtime speeds
2014-12-08 11:24:39 +11:00
Andrew Tridgell cb9c518ab8 Revert "AP_NavEKF : Reduce ripple in estimates that can cause copter motor 'pulsing'"
This reverts commit 13df6fb1c9.

This patch was a result of an incorrect merge of the optflow branch
into master. It reintroduced the bug fixed by this commit:

  AP_NavEKF : Fix bug in reset of GPS glitch offset
  8aa267f75f
2014-12-08 07:53:47 +11:00
Grant Morphett 89602d60fd Autotest: Added BMAC (Belconnen Model Aero Club) to the locations list. 2014-12-07 10:58:08 +11:00
Andrew Tridgell 22a7b69260 AP_OpticalFlow: don't build optical flow example
broken by library changes
2014-12-06 22:05:42 +11:00
Andrew Tridgell fba02479b7 Copter: fixed build with no EKF 2014-12-06 18:43:38 +11:00
Andrew Tridgell 0599f1dcb1 Plane: changed version number to 3.2.1alpha1 2014-12-06 18:37:39 +11:00
Andrew Tridgell ed510d4f87 AP_OpticalFlow: run PX4 flow sensor at 10Hz
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2014-12-06 18:16:51 +11:00
priseborough a2bd3b4a42 AP_NavEKF: Add public method returning height above ground level 2014-12-06 18:16:51 +11:00
priseborough d701cfcb75 AP_NavEKF: Output terrain relative PosD when relying on Optical Flow 2014-12-06 18:16:51 +11:00
priseborough 0156d846f1 AP_NavEKF: Increase height at which nav gain reduction starts
Compensates for optical flow induced noise increase with height.
2014-12-06 18:16:51 +11:00