Andrew Tridgell
8cb55eb75a
APM: keep the time of the last heartbeat message
...
this will be used for failsafe processing
2012-08-15 12:39:34 +10:00
Andrew Tridgell
0584017aff
APM: expose change_command() and geofence_breached() to libraries
...
this makes a failsafe library easier
2012-08-15 12:39:34 +10:00
Andrew Tridgell
93f1d5645b
APM: fixed LOITER_TIME and LOITER_TURNS
...
These now follow the mavlink spec. Loiter time is in seconds, and
loiter turns is now 32 bit angle, so can handle larger numbers of
turns.
2012-08-15 12:39:34 +10:00
Andrew Tridgell
c31eef59ae
Mavlink: log wind estimation result
2012-08-11 22:06:03 +10:00
Andrew Tridgell
d9b09d2c93
APM: allow for navigation by dead-reckoning
...
we now ask AHRS if we have a position estimate, and use that if
available
2012-08-11 12:01:08 +10:00
Andrew Tridgell
0ffc89d512
APM: support the MISSION_WRITE_PARTIAL_LIST command
...
this allows missions to be partially updated in flight
2012-08-09 17:13:36 +10:00
Andrew Tridgell
dc47074dbd
MAVLink: removed the need for Mavlink_compat.h
...
we have now fully transitioned to MAVLink 1.0, so we no longer need
the compatibility layer and the old names in the code
2012-08-09 12:22:46 +10:00
Andrew Tridgell
2a7b298bbc
MAVLink: moved mavlink variables back to library
...
these were moved to the main sketches to allow for compile time
selection of MAVLink 0.9 vs 1.0. We no longer support 0.9, so we can
move it back, which simplifies some test sketches
2012-08-09 12:06:21 +10:00
Andrew Tridgell
e133900c68
APM: Added STICK_MIXING option
...
this replaces the compile time option. Disabling during long distance
flights when the transmitter may be out of range is useful.
2012-08-09 08:53:29 +10:00
Andrew Tridgell
5bfd1200d6
APM: change variables to use _cm, _cd and _ms suffix for units
...
this makes it less likely that we mix up units
2012-08-08 12:12:30 +10:00
Andrew Tridgell
12cd6b68ff
AP_Param: update ArduPlane core for new AP_Param interface
2012-08-08 12:11:57 +10:00
Michael Oborne
cb0eacca37
AP Fix Hil Airspeed calc in m/s
2012-07-26 20:21:17 +08:00
Andrew Tridgell
3c2fc72654
APM: fixed HIL build
2012-07-26 10:09:07 +10:00
Andrew Tridgell
85465c9126
MAVLink: fixed another two places where micros() was used for a millisecond time
2012-07-20 11:57:15 +10:00
Jonathan Challinger
fc4f111d15
Changed mavlink GLOBAL_POSITION_INT.relative_alt message to correctly return altitude above ground.
2012-07-17 16:15:11 +10:00
Andrew Tridgell
de3c9ce56d
Airspeed: change APM to use new AP_Airspeed library
...
the next step is AHRS dead reckoning
2012-07-16 11:21:50 +10:00
Andrew Tridgell
58fd91165f
APM: fixed some build warnings and type errors
2012-07-06 19:59:18 +10:00
Andrew Tridgell
0385932afb
MAVLink: added climb rate reporting
2012-07-05 13:00:46 +10:00
Andrew Tridgell
60caaa4b04
MAVLink: remove MAVLink 0.9 protocol support
...
this simplifies the code a lot. We're not going back to 1.0
2012-07-05 13:00:46 +10:00
Andrew Tridgell
55092c25a6
SITL: enable the SIM_* parameters in ArduCopter and ArduPlane
2012-06-29 15:10:52 +10:00
Andrew Tridgell
5bccfbd94c
Barometer: fixed airstart for APM
...
we need to re-load the ground pressure and temperature from eeprom on
and airstart
2012-06-27 16:01:50 +10:00
rmackay9
621e020dac
ArduPlane HIL: fixed bug so g_gps->setHil calls send time as a uint32_t (was sending a float but was cast back to an uint32_t resulting in a meaningless time that never changed).
2012-06-26 22:59:24 +09:00
Amilcar Lucas
1906e06b69
Added camera trigger functionality
2012-06-13 21:00:20 +02:00
Michael Oborne
b4a1b03fd3
AP: add fake satellite count for hil.
2012-06-02 16:38:20 +08:00
Andrew Tridgell
d9457ecc38
MAVLink: send time of GPS fix accurately
...
when we send a GPS_RAW message, set the usec field to the time we got
the fix from the GPS, not the current time. This makes it possible for
aerial photo processing to be more accurate, as the usec field with
more accurately reflect the planes position/time pair
2012-05-23 17:33:33 +10:00
Andrew Tridgell
8e01bc3593
MAVlink: update ArduPlane for param fetch during DataFlash erase
...
same changes as for ArduCopter
2012-05-22 16:13:35 +10:00
Michael Oborne
218e70cd8b
AP - fix attitude level hil mavlink 1.0 issue
2012-05-06 11:05:35 +08:00
Andrew Tridgell
b6a475f6a5
MAVLink: make APM build with MAVLink 1.0 possible with arduino GUI
2012-04-24 22:24:58 +10:00
Andrew Tridgell
95be2c5922
APM: updates for MAVLink 1.0
2012-04-24 19:54:20 +10:00
Andrew Tridgell
8e6fdb8981
APM: use OutputCh_current() in MAVLink servo logging
...
this gives a more accurate picture of what is actually happening with
the servos
2012-04-24 10:57:43 +10:00
Michael Oborne
8d797fec3c
fix potential null pointer
2012-04-20 17:57:06 +08:00
Andrew Tridgell
e1270401bf
MAVLink: make parameter send use adaptive stream rate
...
this makes it possible to fetch parameters with very low air data
rates
2012-04-02 11:18:53 +10:00
Andrew Tridgell
7b50724f60
MAVLink: allow for find grained stream rate control
...
streams can now be requested at any multiple of 20ms. So if you ask
for a stream at 7Hz then you will get it at close to 7Hz.
2012-04-02 11:18:53 +10:00
Andrew Tridgell
e0bb7e2777
MAVLink: don't waste 100 bytes of bandwidth sending 1 byte of information
...
the GPS_STATUS message is a massive waste of bandwidth, but it is the
only message that tells us the number of visible satellites. So only
send it if that information changes.
This makes MAVLink work better at low baud rates
2012-03-30 17:46:20 +11:00
Andrew Tridgell
4c4c38f69a
APM: Added MANUAL_LEVEL option
...
when MANUAL_LEVEL is set to 1, we don't do accelerometer levelling at
startup, and instead used the values saved in the EEPROM. This makes
it easier to do levelling on the bench, or once for a series of
flights for the day
2012-03-29 12:39:53 +11:00
Andrew Tridgell
34506b170f
Mavlink: fixed warnings about limits on int32 values
2012-03-27 15:37:25 +11:00
Andrew Tridgell
458d55e5bc
MAVLink: constrain variable changes to the datatype range
...
if someone tries to set a AP_Int16 to a value of 300000, they now get
32767 instead of -27678
2012-03-19 17:29:02 +11:00
Andrew Tridgell
8afd196907
APM: adapt ArduPlane for AHRS framework
2012-03-19 17:29:02 +11:00
Andrew Tridgell
d75e883fe8
GCS: get_integrator() is now get_gyro_drift() in DCM
2012-03-10 10:34:33 +11:00
Andrew Tridgell
13d5839778
APM: removed quaternion special cases
2012-03-10 10:34:32 +11:00
Andrew Tridgell
e39c3cb9d2
APM: make it possible to build ArduPlane with quaternion support
2012-03-10 10:34:29 +11:00
Andrew Tridgell
b455443e2c
APM: added logging of DCM, HWSTATUS and SIMSTATE
2012-03-10 10:34:27 +11:00
Andrew Tridgell
690dc9052a
GCS: force scalar type in copy_name()
...
this enables access to compass offsets over MAVLink
2012-02-25 11:37:20 +11:00
Andrew Tridgell
df8a557630
AP_Param: update users of AP_Param for ParamToken
2012-02-19 17:05:28 +11:00
Andrew Tridgell
78babd37fa
APM: use set_and_save_ifchanged() for GCS stream rates
...
this avoids a lot of EEPROM scan operations when the groundstation
updates the stream rates
2012-02-18 10:51:57 +11:00
Andrew Tridgell
c662140a2b
APM: report the nav_bearing as hold_course when enabled
...
this gives a more accurate view of the navigation code, as when
hold_course is not -1 it overrides nav_bearing
2012-02-15 08:50:45 +11:00
Andrew Tridgell
c042ef1298
APM: fixed some build warnings
2012-02-14 08:58:56 +11:00
Andrew Tridgell
8d1729b3ba
Mavlink: report the corrected pitch via MAVLink
...
this subtracts the TRIM_PITCH_CD from the pitch reported via
MAVLink. That gives a better indication of the true pitch in the tlog
2012-02-14 08:58:56 +11:00
Andrew Tridgell
ecdbfd257a
token is 16 bits now
2012-02-13 16:22:53 +11:00
Andrew Tridgell
0b3e3ec5c8
added group indexes to GCS_MAVLINK class
2012-02-13 16:22:52 +11:00