Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-08 17:08:28 -04:00
Code Issues Packages Projects Releases Wiki Activity
22,962 Commits 71 Branches 510 Tags 772 MiB
e117bedf6a
Commit Graph

11735 Commits

Author SHA1 Message Date
Tom Pittenger
7b4c503052 AP_Math: use new check_latlng helper 2016-06-01 17:38:48 -07:00
Tom Pittenger
ce9ecf9f3d AP_Math: added check_latlng helper 2016-06-01 17:38:48 -07:00
Tom Pittenger
64c2510be9 AC_AttitudeControl: fix compile warning float to double promotion in string conversion 2016-06-01 17:38:47 -07:00
Andrew Tridgell
b4bdfa2451 AC_AttitudeControl: return roll, pitch and yaw controller error separately 
as discussed with Leonard
 2016-06-01 17:18:58 +10:00
Grant Morphett
d56e2b6a39 APM_Control: Get steer rate using earth frame. 
Rather then just using the standard z gyro by using the earth frame it
takes into account when a rover leans over in hard corners.  My rover
leans 15 degrees no problem which is why this is needed.
 2016-06-01 10:05:20 +09:00
Andrew Tridgell
b855c70139 GCS_MAVLink: don't route RADIO and RADIO_STATUS packets 
they don't mean anything off the local link
 2016-05-31 22:13:05 +10:00
Paul Riseborough
24d8cc62e2 AP_NavEKF2: rework yaw and magnetic heading reset logic 
Splits in-flight yaw alignment completed status into separate yaw and magnetic field flags.
Reduce the number of places where decisions to perform a yaw and field reset are made.
Don't perform a reset unless there is is data in the buffer
Don't use 3-axis fusion if the field states still need to be reset.
When starting 3-axis fusion request a reset if not previously performed.
Ensure magnetometer and GPs heading resets are alwasy perfomred with data at teh correct time horizon.
 2016-05-31 16:12:53 +10:00
Andrew Tridgell
a6cbc5d4a5 AP_AHRS: use EKF for groundspeed estimate if available 2016-05-31 15:56:25 +10:00
Leonard Hall
a16018f9fe AP_Motors: Missed Single fix 2016-05-31 12:44:17 +10:00
Peter Barker
1e146256cc GCS_MAVLink: move telemetry_delayed up into base class 2016-05-31 08:46:09 +10:00
Grant Morphett
944541b287 PID: Added PID_Info to class for PID logging 2016-05-31 08:44:52 +10:00
Andrew Tridgell
abe850c397 PID: fixed example build 2016-05-31 08:36:14 +10:00
Andrew Tridgell
38965f4617 DataFlash: fixed example build 2016-05-31 08:36:07 +10:00
Andrew Tridgell
04f87a452e HAL_SITL: fixed tcp client mode 2016-05-30 16:42:28 +10:00
Peter Barker
e828525c94 GCS_MAVLink: adjust_rate_for_stream_trigger is no longer virtual 2016-05-29 21:24:41 +10:00
Peter Barker
43fed65f37 GCS_MAVLink: move adjust_rate_for_stream up 2016-05-29 19:38:49 +10:00
Andrew Tridgell
f4f0ae8c8b SITL: auto-reconnect FlightAxis on reset button 2016-05-29 19:17:29 +10:00
Peter Barker
03ded35d7c GCS_MAVLink: update routing example for mavlink namespacing 2016-05-29 16:21:21 +10:00
Peter Barker
56114dd37a GCS_MAVLink: use subclasses in vehicle directories 
Instead of the vehicles defining functions that are declared in the libraries directory, they will now create subclasses of GCS_MAVLINK
 2016-05-29 16:21:20 +10:00
Leonard Hall
d67f83559c AP_Motors: Single and Coax Fixes 2016-05-29 16:12:29 +10:00
Leonard Hall
e5bdf0a0a2 SITL: Single and Coax fixes 2016-05-29 16:12:13 +10:00
Andrew Tridgell
26ef71e130 AP_Notify: added tuning error tones 2016-05-28 17:33:30 +10:00
Andrew Tridgell
006aafab3f AP_Tuning: added monitoring of controller output 2016-05-28 17:33:30 +10:00
Andrew Tridgell
6330060e49 AC_AttitudeControl: added monitoring of controller error 
use RMS P+I+FF output. Thanks to Leonard for the suggestion
 2016-05-28 17:33:30 +10:00
Andrew Tridgell
fdac1d26cc AP_Tuning: added TUNE_MODE_REVERT parameter 2016-05-28 17:33:30 +10:00
Randy Mackay
72b86a3f99 AP_Motors: remove unused stabilizing flag 
Also initialise some members to resolve converity warnings
 2016-05-28 15:45:29 +09:00
Andrew Tridgell
7ec513668e GCS_MAVLink: reserve some space when param fetch fails 
this ensures we give some buffer space for parameter fetch when we are
low on buffer space

we reserve 100 bytes for 2 seconds after a param fetch fails due to
low buffer space
 2016-05-28 15:08:46 +10:00
Andrew Tridgell
f02c8f732c DataFlash: fixed BAR2 format for drift offset 2016-05-28 15:08:46 +10:00
Paul Riseborough
a94a19bd09 AP_NavEKF2: Fix bug causing continual yaw resets 2016-05-28 06:52:11 +10:00
Tom Pittenger
57d6ccc0dd AP_HAL_PX4: skip the 100ms delay on first px4io safety_state async attempt 2016-05-27 11:30:50 -07:00
Tom Pittenger
d3ac1dc161 AP_HAL: defer calls to safety_state switch to queue an async attempt. 
- this allows for auto-retries if the state does not set correctly
 2016-05-27 21:34:40 +10:00
Tom Pittenger
67aaf7e226 AP_HAL_PX4: defer calls to safety_state switch to queue an async attempt. 
- this allows for auto-retries if the state does not set correctly
 2016-05-27 21:34:40 +10:00
Andrew Tridgell
97e2203e70 AP_NavEKF2: don't do 3D mag fusion on 2nd EKF2 core 
this reduces the risk that mag fusion errors will badly affect
attitude estimation.
 2016-05-27 21:27:06 +10:00
Andrew Tridgell
d17e3b17bf AP_AHRS: special handling for flying fixed wing with no compass 
we need to accept EKF having no absolute position and velocity before
takeoff with no compass
 2016-05-27 10:18:53 +10:00
Paul Riseborough
de15928921 AP_NavEKF2: prevent potential arithmetic error in declination fusion 2016-05-27 09:00:41 +10:00
Paul Riseborough
722eb0d706 AP_NavEKF2: Fix bug for start of wind speed estimation 
The commencement of airspeed fusion could cause pitch errors due to small variances and large innovations. This issue is addressed by the following changes:
1) The airspeed measurement is used to set wind states to a value that reduces initial innovations.
2) The wind state variances are set to values that better reflect the wind speed uncertainty
 2016-05-27 09:00:41 +10:00
Paul Riseborough
ac329ec31c AP_NavEKF2: use observation noise to set initial magnetic field variances 2016-05-27 09:00:41 +10:00
Paul Riseborough
830751c0ae AP_NavEKF2: remove un-wanted functionality from mag and yaw reset 
The function used to reset magnetic field states and yaw angle should not be used when there is no magnetometer. If it is incorrectly called without a magnetometer it should not change the attitude or field states.
 2016-05-27 09:00:41 +10:00
Paul Riseborough
11c6ea7ef6 AP_NavEKF2: attitude co-variance reset for all post alignment yaw resets 
Whenever the yaw angle is changed, the correlation with other state errors will be incorrect and the terms should be zeroed.
 2016-05-27 09:00:41 +10:00
Paul Riseborough
cdd09df9ac AP_NavEKF: Add function to zero attitude state co-variances 
When changing the vehicle yaw angle, the correlation between the attitude errors and errors in other states is invalid so the corresponding co-variance terms need to be zeroed.
This needs to be done in more than one place.
 2016-05-27 09:00:41 +10:00
Paul Riseborough
6d34ac5ceb AP_NavEKF2: improve switch-over to use of mag field states 
Set initial variances to measurement uncertainties
Always perform a field  and yaw reset
 2016-05-27 09:00:40 +10:00
Paul Riseborough
fe9ddfdfeb AP_NavEKF2: remove code that prevents attitude updates after mag reset 
This code assumes a vehicle is close to level and will not work for all vehicle types. It will be replaced by a different method.
 2016-05-27 09:00:40 +10:00
Paul Riseborough
fe85c68344 AP_NavEKF2: move yaw reset for no compass case 
Should not be in a function that performs reset on magnetic field states
 2016-05-27 09:00:40 +10:00
Paul Riseborough
da0622827d AP_NavEKF: update tuning defaults 
Increase speed of scale factor learning
 2016-05-27 09:00:40 +10:00
Andrew Tridgell
4c66e14563 SITL: fixed air resistance bug for heli, balloon and singlecopter 2016-05-26 20:38:20 +10:00
Randy Mackay
d26a9d4a22 SITL: fix compiler warning by defaulting frame_type 2016-05-26 17:03:28 +09:00
Andrew Tridgell
969b6ebea9 HAL_SITL: support coaxcopter in SITL 2016-05-26 17:09:22 +10:00
Andrew Tridgell
a2ed8fb313 AP_Motors: prevent negative thrust 
this prevents a sqrt of a negative number
 2016-05-26 17:09:11 +10:00
Andrew Tridgell
9f33ece3ef SITL: support coax copter 2016-05-26 17:08:27 +10:00
Andrew Tridgell
6855899cbf AP_Motors: fixed servo constructor for coax 2016-05-26 16:41:16 +10:00
Andrew Tridgell
4e5e301c4e AP_Motors: fixed servo constructor for heli 2016-05-26 16:41:06 +10:00
Andrew Tridgell
a80e233836 HAL_SITL: added SingleCopter 2016-05-26 16:30:39 +10:00
Andrew Tridgell
8944d298ed SITL: added SingleCopter simulator 2016-05-26 16:30:39 +10:00
Andrew Tridgell
f9fb098222 AP_Motors: fixed channel output for SingleCopter 2016-05-26 16:26:43 +10:00
Andrew Tridgell
163783fefd AP_HAL: define CH_NONE 
for servos not connected to a channel
 2016-05-26 16:26:30 +10:00
Andrew Tridgell
65eb9ceb32 AP_Motors: expose min/max pwm 2016-05-26 14:33:57 +10:00
Andrew Tridgell
dda35a366c HAL_PX4: prevent rate changes once oneshot is setup 
this fixes a problem with small motor outputs at the start of a motor
test.

Thanks to Luis for reporting this.
 2016-05-26 12:18:49 +10:00
Andrew Tridgell
a44b0e0011 AP_Motors: don't setup oneshot for a zero output mask 2016-05-26 12:18:49 +10:00
Andrew Tridgell
d90a2f7deb DataFlash: added get_structures() API 
used in Replay
 2016-05-25 20:46:00 +10:00
Andrew Tridgell
ac8c4d9beb AP_Mount: use zero length flexible arrays in unions 2016-05-25 19:55:49 +10:00
Andrew Tridgell
af116d238f AP_GPS: use zero length flexible arrays 
this works with gcc-6.1 and also works with asan. Hopefully it will
make coverity happy too.
 2016-05-25 19:55:49 +10:00
Andrew Tridgell
ae3cb0557d HAL_PX4: disable "Overtime in task" msg 
this hasn't helped us find any bugs and it is very annoying with nsh
over MAVLink
 2016-05-25 12:35:42 +10:00
Paul Riseborough
9eef97d108 AP_NavEKF2: use consistent parameter naming 
M_NSE is a measurement noise
P_NSE is a observation noise
I_GATE is an innovation gate

This also ensures the new parameter values required to use the EKF2 will be enforced.
 2016-05-25 12:06:04 +10:00
Fredrik Hedberg
75d5c87788 AP_Motors: Fix setpoint bug with 0~1 conversion in AP_MotorsHeli 2016-05-25 09:27:40 +09:00
Andrew Tridgell
1fd4cbffb2 DataFlash: update for changed AP_Airspeed API 2016-05-24 17:00:56 +10:00
Andrew Tridgell
4131b98f8c AP_Airspeed: use non-blocking airspeed calibration 
this prevents the EKF from being upset by a time jump
 2016-05-24 17:00:56 +10:00
Andrew Tridgell
1581a5e354 AP_Param: fixed forced save of constructor override parameters 
this fixes the problem where setting ATC_RAT_YAW_FILT to 20 in copter
didn't stick across reboots
 2016-05-24 16:55:45 +10:00
Grant Morphett
52755c893d Rover: Print message when running skid steering SITL 2016-05-24 12:24:53 +10:00
Randy Mackay
8d1f50e78f AP_Motors: rename get_pwm_min to get_pwm_output_min 2016-05-24 10:00:25 +09:00
Randy Mackay
0c225cf498 AP_MotorsMulticopter: fix typo in comments 2016-05-24 10:00:25 +09:00
Randy Mackay
ff93524ba4 AP_Motors: rename MOT_THST_MAX to MOT_SPIN_MAX 
Also renamed:
MOT_THST_BAT_MIN,MAX to MOT_BAT_VOLT_MIN,MAX
MOT_CURR_MAX to MOT_BAT_CURR_MAX
 2016-05-24 10:00:25 +09:00
Randy Mackay
f1cbdbe914 AP_Motors: update some comments 2016-05-24 10:00:25 +09:00
Randy Mackay
49b14b3cb6 AP_Motors: add PWM_MIN, MAX 
These parameters allow the motor PWM output range to be different from receiver's throttle input range
Also renamed throttle_pass_through to set_throttle_passthrough_for_esc_calibration and change the method's input to the 0 to 1 range instead of direct PWM value
 2016-05-24 10:00:25 +09:00
Lucas De Marchi
bbe3a94175 AP_HAL: remove support for main without argc 
This was only used by flymaple. Also add missing copyright notice to
header.
 2016-05-23 21:49:45 -03:00
Lucas De Marchi
b067bce140 AP_InertialSensor: remove support for flymaple 2016-05-23 21:49:45 -03:00
Lucas De Marchi
346bdf5f8f AP_HAL: remove support for flymaple 2016-05-23 21:49:45 -03:00
Lucas De Marchi
7703e5f1d1 AP_Common: remove support for flymaple 2016-05-23 21:49:45 -03:00
Lucas De Marchi
e448f161d2 AP_BattMonitor: remove support for flymaple 2016-05-23 21:49:45 -03:00
Lucas De Marchi
62f048c417 AP_Airspeed: remove support for flymaple 2016-05-23 21:49:45 -03:00
Lucas De Marchi
7503c1b6d4 AP_InertialSensor: update doc about used ids 2016-05-23 21:49:45 -03:00
Lucas De Marchi
01b9316114 AP_HAL_AVR: remove examples 
These were committed by mistake after AP_HAL_AVR was removed.
 2016-05-23 21:49:45 -03:00
Lucas De Marchi
dfde4a27e6 AP_HAL_FLYMAPLE: remove hal 
This is untested and not being updated lately. We can support it on the
avr branch or add it back later when someone is willing to maintain it
in upstream.
 2016-05-23 21:49:45 -03:00
Andrew Tridgell
64e105464d GCS_MAVLink: fixed disabling of signing remotely 2016-05-24 07:25:54 +10:00
Lucas De Marchi
3457dbcdf8 AP_HAL_Linux: rename lttng define 
Like others, use HAVE_ prefix and name it HAVE_LTTNG_UST to be the same
name as exported by pkg-config While at it remove wrong comment with
_HELLO_TP_H.
 2016-05-23 12:06:42 -03:00
Andrew Tridgell
635a975486 HAL_SITL: use a smaller buffer for real SITL UARTs 
better emulation of real hw
 2016-05-23 23:41:02 +10:00
Andrew Tridgell
595d5c0002 AP_HAL: added set_size() to RingBuffer API 2016-05-23 23:41:02 +10:00
Andrew Tridgell
0bbddd38cf GCS_MAVLink: fixed some places where packets are sent without space 
we always need sufficient space for the packet in the send buffer
 2016-05-23 23:41:01 +10:00
Lucas De Marchi
13722b8858 AP_HAL_Linux: support 16 RCInput channels on Navio2 2016-05-23 09:12:33 -03:00
Andrew Tridgell
5f7af390ec AP_Common: a useful debug macro for SITL 2016-05-23 10:10:29 +10:00
Andrew Tridgell
ef210217dd HAL_Linux: cope with MAVLink2 in UDP driver for packetising 2016-05-23 10:10:03 +10:00
Andrew Tridgell
8486d4ab5e AP_AHRS: disable EKF1 on all PX4v1 and PX4v2 boards 
we're out of space in copter now too
 2016-05-21 15:25:18 +10:00
Andrew Tridgell
273c80116a GCS_MAVLink: added a wrapper for sending HEARTBEAT 
will be used to cope with old radios with MAVLink2
 2016-05-21 15:25:17 +10:00
Andrew Tridgell
2094cb2d88 RC_Channel: fixed example for MAVLink2 2016-05-21 15:25:17 +10:00
Andrew Tridgell
8899455ea3 GCS_MAVLink: use extended MEMINFO message 2016-05-21 15:25:17 +10:00
Andrew Tridgell
fde0652d81 DataFlash: use HAVE_PAYLOAD_SPACE() 2016-05-21 15:25:17 +10:00
Andrew Tridgell
cd1f43a6ce GCS_MAVLink: use generated target_system and target_component offsets 2016-05-21 15:25:17 +10:00
Andrew Tridgell
018b1143d2 GCS_MAVLink: handle difference between SERIALn_PROTOCOL=1 and 2 2016-05-21 15:25:17 +10:00
Andrew Tridgell
78e9ef427e AP_SerialManager: remove special case for console 
and add get_mavlink_protocol() to allow selection of correct mavlink
protocol behaviour
 2016-05-21 15:25:17 +10:00
Andrew Tridgell
b3f94184f2 GCS_MAVLink: always build with MAVLink2 headers 2016-05-21 15:25:16 +10:00
Andrew Tridgell
f377787444 AP_Mount: always build with MAVLink2 headers 2016-05-21 15:25:16 +10:00
Andrew Tridgell
94feae9eaf AP_HAL_QURT: always build with MAVLink2 headers 2016-05-21 15:25:16 +10:00
Andrew Tridgell
6f7d6269a8 AP_HAL_Linux: always build with MAVLink2 headers 2016-05-21 15:25:16 +10:00
Andrew Tridgell
ef4d7e5618 GCS_MAVLink: fixed build with mavlink1 2016-05-21 15:25:15 +10:00
Andrew Tridgell
048fc8d39e GCS_MAVLink: adjust for min_length mavlink2 API change 2016-05-21 15:25:15 +10:00
Andrew Tridgell
318ec69465 GCS_MAVLink: added periodic saving of signing key 
thanks to Michael for noticing this was missing
 2016-05-21 15:25:15 +10:00
Andrew Tridgell
40d1a23a13 AP_Terrain: use HAVE_PAYLOAD_SPACE() 2016-05-21 15:25:15 +10:00
Andrew Tridgell
ec62d8f4ca AP_Mount: use HAVE_PAYLOAD_SPACE() 2016-05-21 15:25:14 +10:00
Andrew Tridgell
12c1d58511 GCS_MAVLink: cope with different packet overheads with signing 
use common macros for determining if there is sufficient space to send
a packet
 2016-05-21 15:25:14 +10:00
Andrew Tridgell
006b9728d0 GCS_MAVLink: updates for 24 bit msgid 2016-05-21 15:25:14 +10:00
Andrew Tridgell
a05679fb3b GCS_MAVLink: fixed build after rebase 2016-05-21 15:25:14 +10:00
Andrew Tridgell
7aae93e3e0 GCS_MAVLink: fixed auto-switching to MAVLink2 2016-05-21 15:25:14 +10:00
Andrew Tridgell
4ba09671a4 GCS_MAVLink: support disabling signing with zero key 2016-05-21 15:25:13 +10:00
Andrew Tridgell
c96ed2b4c6 GCS_MAVLink: fixed calculation of GPS timestamp 2016-05-21 15:25:13 +10:00
Andrew Tridgell
970dbf3c8d GCS_MAVLink: fixed build with MAVLink1 2016-05-21 15:25:13 +10:00
Andrew Tridgell
24eb6afbe9 GCS_MAVLink: provide signing streams and accept_unsigned callback 2016-05-21 15:25:13 +10:00
Andrew Tridgell
ed9a43ca46 GCS_MAVLink: support for mavlink2 signing operations 2016-05-21 15:25:12 +10:00
Andrew Tridgell
ca39ece6cb StorageManager: added storage region for signing keys 2016-05-21 15:25:12 +10:00
Andrew Tridgell
8ea9e29fee GCS_MAVLink: use a fixed signing key for testing 2016-05-21 15:25:12 +10:00
Andrew Tridgell
0ead0ab978 GCS_MAVLink: support mavlink2 build 2016-05-21 15:25:12 +10:00
Andrew Tridgell
0ef5d8995b AP_Mount: support mavlink2 build 2016-05-21 15:25:12 +10:00
Andrew Tridgell
4eadab7a90 HAL_QURT: support mavlink2 build 2016-05-21 15:25:12 +10:00
Andrew Tridgell
31f8d26784 HAL_Linux: support mavlink2 build 2016-05-21 15:25:11 +10:00
Paul Riseborough
74121fdaeb AP_NavEKF2: fix bug preventing in-flight alignment 2016-05-21 15:13:53 +10:00
Paul Riseborough
16cb7078cd AP_NavEKF2: Fix misleading pre-flight status reporting 2016-05-21 15:13:53 +10:00
Paul Riseborough
38d61f5281 AP_NavEKF2: Update status reporting to handle no-magnetometer startup 2016-05-21 15:13:53 +10:00
Paul Riseborough
9aa3cdfaae AP_NavEKF2: Update GPS yaw re-alignment function 
Updates to support initial alignment without magnetometer
 2016-05-21 15:13:53 +10:00
Paul Riseborough
e3c966661b AP_NavEKF2: Remove unnecessary variance reset 
This reset is unnecessary give that a synthetic yaw angle is fused at a low rate to prevent variances from becoming badly conditioned.
 2016-05-21 15:13:53 +10:00
Paul Riseborough
1179c08473 AP_NavEKF2: Handle case where we are in-flight and haven't yet aligned the yaw 
This happens if planes are flown without a compass
 2016-05-21 15:13:53 +10:00
Paul Riseborough
581c1aa0d4 AP_NavEKF2: Adjust attitude variance values used after a heading reset 
Because these errors are in body frame, a spherical error should be used to accommodate different orientations
 2016-05-21 15:13:53 +10:00
Paul Riseborough
5ec8d523f6 AP_NavEKF: remove unwanted co-variance reset 
The co-variance resets required following a velocity and position state reset is now performed in the stte reset function
 2016-05-21 15:13:53 +10:00
Paul Riseborough
66e4d9d6e8 AP_NavEKF2: Reset co-variance values when doing a pos,vel,hgt reset 
Ensures consistent behaviour after resets and reduces attitude disturbances
 2016-05-21 15:13:52 +10:00
Paul Riseborough
cf8175a073 AP_NavEKF2: Allow immediate use of GPS in-flight for plane without compass 
Planes operating without a compass must align the yaw to the GPS heading immediately after launch or takeoff and cannot wait for GPS accuracy checks.
 2016-05-21 15:13:52 +10:00
Paul Riseborough
08de4e6d95 AP_NavEKF: Do not perform start-up yaw alignment if no compass 
Yaw cannot be aligned until in-flight when there is sufficient GPS velocity.
 2016-05-21 15:13:52 +10:00
Paul Riseborough
d2694fe5dc AP_NavEKF2: Remove duplicate transition into GPS aiding 
This decision is made in one place in setAidingMode()
 2016-05-21 15:13:52 +10:00
Paul Riseborough
7201f7d2fd AP_NavEKF2: fix comment 2016-05-21 15:13:52 +10:00
Paul Riseborough
64a8153b68 AP_NavEKF2: update function name 
The primary purpose of this function is re-alignment
 2016-05-21 15:13:52 +10:00
Paul Riseborough
addd213af0 AP_NavEKF2: reduce effect of acceleration on non-GPS mode attitude 2016-05-21 15:13:52 +10:00
Paul Riseborough
d33bbf8cc7 AP_NavEKF: remove debug code 2016-05-21 15:13:52 +10:00
Paul Riseborough
54213ad871 DataFlash: Improve reporting of normalised ekf2 magnetometer innovations 
Report the maximum of the x,y,z axis
 2016-05-21 15:13:52 +10:00
Paul Riseborough
a3b78e6231 AP_NavEKF2: update tuning defaults 2016-05-21 15:13:51 +10:00
Paul Riseborough
65f63341d7 AP_NavEKF2: Improve numerical error protection in optical flow fusion 
Abort fusion of data if variances will become negative and publish the fault
 2016-05-21 15:13:51 +10:00
Paul Riseborough
42da33593d AP_NavEKF2: fix yaw fusion numerical health reporting 2016-05-21 15:13:51 +10:00
Paul Riseborough
6eb9d43507 AP_NavEKF2: add numerical error checking and isolation to mag decl fusion 2016-05-21 15:13:51 +10:00
Paul Riseborough
b325c5faeb AP_NavEKF2: add error checking and isolation to mag heading fusion 2016-05-21 15:13:51 +10:00
Paul Riseborough
a0b1dc5325 AP_NavEKF2: add error checking and isolation to 3D amg fusion 2016-05-21 15:13:51 +10:00
Paul Riseborough
51a3df0319 AP_NavEKF2: Add error checking and isolation to pos vel fusion 2016-05-21 15:13:51 +10:00
Paul Riseborough
fcee82f9b2 DataFlash: extend ekf fault status reporting coverage 2016-05-21 15:13:51 +10:00
Paul Riseborough
597ec61673 AP_AHRS: extend ekf fault status reporting coverage 2016-05-21 15:13:50 +10:00
Paul Riseborough
d59d8cc6e3 AP_NavEKF: extend fusion fault reporting coverage 2016-05-21 15:13:50 +10:00
Paul Riseborough
71b589c89c AP_NavEKF2: extend fusion fault reporting coverage 2016-05-21 15:13:50 +10:00
Paul Riseborough
0982bd0b2b AP_NavEKF2: update parameter documentation 2016-05-21 15:13:50 +10:00
Paul Riseborough
46a2993a0d AP_NavEKF: use intuitive units for imu bias process noise parameters 2016-05-21 15:13:50 +10:00
Paul Riseborough
8c374fd679 AP_NavEKF2: correct comments 2016-05-21 15:13:50 +10:00
Paul Riseborough
6be9eaa524 AP_NavEKF2: use receiver estimated accuracy 
Adjust the GPS observation noise based on receiver accuracy output if available.
 2016-05-21 15:13:50 +10:00
Paul Riseborough
dddc213836 AP_NavEKF2: Open up tuning limits 
Done to assist tuning assessments
 2016-05-21 15:13:50 +10:00
Paul Riseborough
cf05e110fc AP_NavEKF2: fix scaling error in use of IMU noise parameters 
Also remove process noise from state transition matrix where it was mistakenly left in after the derivation
 2016-05-21 15:13:50 +10:00
Randy Mackay
2bafc36ded AC_WPNav: support rangefinder for terrain following 2016-05-21 10:36:53 +09:00
Randy Mackay
4829dbb55d AC_Fence: rename check_destination_within_fence and accept distances in meters 2016-05-21 09:56:12 +09:00
Saloni Jain
ff843448aa AC_Fence: Added a new function to check whether the guided waypoint is within the fence 2016-05-21 09:56:12 +09:00
Gustavo Jose de Sousa
9a100afede AP_HAL_Linux: Thread: add doc about rounding function 2016-05-20 16:31:15 -03:00
Lucas De Marchi
359417d544 AP_HAL_Linux: Thread: make sure pointer is aligned 
Implementation of alloca() is very much architecture and compiler
dependent. Avoid the case in which it could return a non-aligned
pointer, which would mean Thread::_poison_stack() would do the wrong
thing.
 2016-05-20 16:31:15 -03:00
Lucas De Marchi
7e49d0c53f AP_HAL_Linux: Thread: fix alignment warning 
../../libraries/AP_HAL_Linux/Thread.cpp: In member function ‘void Linux::Thread::_poison_stack()’:
../../libraries/AP_HAL_Linux/Thread.cpp:87:31: warning: cast from ‘uint8_t* {aka unsigned char*}’ to ‘uint32_t* {aka unsigned int*}’ increases required alignment of target type [-Wcast-align]
         for (p = (uint32_t *) end; p > curr; p--) {
                               ^
../../libraries/AP_HAL_Linux/Thread.cpp:93:31: warning: cast from ‘uint8_t* {aka unsigned char*}’ to ‘uint32_t* {aka unsigned int*}’ increases required alignment of target type [-Wcast-align]
         for (p = (uint32_t *) end; p < curr; p++) {
                               ^
../../libraries/AP_HAL_Linux/Thread.cpp:98:39: warning: cast from ‘uint8_t* {aka unsigned char*}’ to ‘uint32_t* {aka unsigned int*}’ increases required alignment of target type [-Wcast-align]
     _stack_debug.start = (uint32_t *) begin;
                                       ^
../../libraries/AP_HAL_Linux/Thread.cpp:99:37: warning: cast from ‘uint8_t* {aka unsigned char*}’ to ‘uint32_t* {aka unsigned int*}’ increases required alignment of target type [-Wcast-align]
     _stack_debug.end = (uint32_t *) end;
                                     ^
 2016-05-20 16:31:15 -03:00
Lucas De Marchi
18af4da690 AP_HAL_Linux: Thread: fix warning regarding shadow member 
../../libraries/AP_HAL_Linux/Thread.cpp: In member function ‘void Linux::Thread::_poison_stack()’:
../../libraries/AP_HAL_Linux/Thread.cpp:63:20: warning: declaration of ‘start’ shadows a member of 'this' [-Wshadow]
     uint8_t *end, *start, *curr;
                    ^
 2016-05-20 16:31:15 -03:00
Tom Pittenger
684ac12dd6 AC_WPNav: fix compile when using AP_TERRAIN_AVAILABLE 0 2016-05-20 12:29:19 -07:00
Tom Pittenger
f085666032 AP_Common: fix compile when using AP_TERRAIN_AVAILABLE 0 2016-05-20 12:28:46 -07:00
Leandro Pereira
3555e439a4 AP_HAL_Linux: Simplify I2C initialization in HAL_Linux_Class 2016-05-20 10:12:17 -03:00
Aaron Wang Shi
cb9cd9008a AP_HAL_Linux: fix bhat spi device driver build error 2016-05-20 10:09:50 -03:00
Lucas De Marchi
035937ea7e AP_GPS: add some safety checks to _parse_decimal_100() 2016-05-20 10:06:45 -03:00
Lucas De Marchi
994b2fc966 AP_GPS: add unit test for _parse_decimal_100() 2016-05-20 10:06:44 -03:00
Lucas De Marchi
fc6dd97e61 AP_GPS: make _parse_decimal_100() a static function 
This allows to easily write tests for it as opposed to having to
construct the entire object.
 2016-05-20 10:06:44 -03:00
Bert Regelink
7379d120e1 AP_GPS: fix _parse_decimal_100() with negative numbers 
_parse_decimal_100() did not parse the fractional part for negative
numbers. Furthermore, use the third decimal (when present) for proper
rounding.
 2016-05-20 10:06:44 -03:00
AndersonRayner
aaa8709194 AP_RPM: Added an example script 2016-05-19 19:01:03 -03:00
Vinicius Juvinski
ed2718a183 AP_Notify: Buzzer: change pin 11(P8_31) to pin 12(P8_32) 
Avoid boot conflict during power on.
 2016-05-19 17:22:27 -03:00
Randy Mackay
54731a139f AP_Mission: rename starts_with_takeoff_cmd 2016-05-19 19:43:22 +09:00
Niti Rohilla
9ec0000691 AP_Mission: add check_takeoff_cmd 
This checks that the first command in the mission is a takeoff command which helps avoid mission setup errors in which users forget to start a mission with a takeoff command
 2016-05-19 19:43:17 +09:00
Niti Rohilla
d771017c25 AP_Mission: support MAV_CMD_NAV_DELAY command 2016-05-19 16:16:02 +09:00
Randy Mackay
67620f312d AP_HAL: fix comment for get_time_utc 2016-05-19 16:05:29 +09:00
Niti Rohilla
faec752801 AP_HAL: add get_system_clock_utc functions to Util 2016-05-19 16:05:26 +09:00
Andrew Tridgell
4080c6091d AP_NavEKF2: fixed an assumption that _ahrs->get_compass() always works 
if MAG_ENABLE=0 in plane there is no compass
 2016-05-19 14:16:40 +10:00
Lucas De Marchi
71e10c9132 AP_HAL_Linux: fix include order 
Sort include alphabetically and make them in order:

Main header
system headers
library headers
local headers

While reordering, change a include of endian.h to our sparse-endian.h
which is more reliant to toolchain changes.
 2016-05-18 23:05:56 -03:00
Lucas De Marchi
45c6b750f2 AP_HAL_Linux: remove ifdef checks for HAL_BOARD_LINUX 
Everything inside libraries/AP_HAL_Linux is for Linux boards, there's
not need to add the ifdefs.
 2016-05-18 23:05:56 -03:00
Lucas De Marchi
c4306de122 AP_Common: fix build on windows 
The way the build was fixed for gcc >= 5.3 breaks the build for older
compiler versions on waf. Fix this by ifdef'ing for WAF_BUILD and
checking the compiler version.
 2016-05-18 22:56:50 -03:00
Lucas De Marchi
9ccce2c980 AP_Compass: explicitely add compasses for erlebrain2, pxf and pxfmini 2016-05-18 18:24:14 -03:00
Lucas De Marchi
8372e74c0f AP_Compass: simplify handling of sensors for Linux boards 
In addition:
    - bbbmini, navio and navio2 can force HMC5843 backend to
      be external.
    - there was a typo in the backend name that's now fixed:
      AK8953 vs AK8963
 2016-05-18 18:24:14 -03:00
Lucas De Marchi
1ddbafabdd AP_Compass: add name field to internal compass drivers 2016-05-18 18:24:14 -03:00
Gustavo Jose de Sousa
ef61096e08 AP_Math: geodesic_grid tool: show triangle number for sections too 2016-05-18 13:28:52 -03:00
Gustavo Jose de Sousa
a6deb65d95 AP_Math: geodesic_grid tool: add option --section 2016-05-18 13:28:52 -03:00
Andrew Tridgell
f7ac6c8d86 AP_Compass: make internal compasses use a higher cal threshold 
they tend to be a lot noisier
 2016-05-18 16:32:32 +10:00
Tom Pittenger
d67b1edf10 AP_NavEKF2: (potential) compiler warning of float to double promotion 2016-05-17 20:30:51 -07:00
Tom Pittenger
3c6323dd82 AP_TECS: Log TEC2.LF as Aerodynamic Load Factor 2016-05-17 20:17:27 -07:00
Tom Pittenger
32d51e346d DataFlash: optimize logging climbrate - call function one and reuse result 2016-05-17 18:59:14 -07:00
Tom Pittenger
ad11f3815b AP_HAL_SITL: rename aspd variables to arspd 2016-05-17 16:36:14 -07:00
Tom Pittenger
c77a5e6764 SITL: rename aspd variables and params to arspd 2016-05-17 16:36:07 -07:00
Tom Pittenger
d55401aa18 AP_Tuning: fixed float->double promotion compiler warning 2016-05-17 16:32:10 -07:00
Tom Pittenger
ae91804aaa AP_Arming: updated comment for z-axis accel threshold 2016-05-17 16:31:42 -07:00
Tom Pittenger
f9335e9d8c AP_TECS: fixed float->double print warning 2016-05-17 15:58:03 -07:00
Lucas De Marchi
1ac712fa65 AP_Math: fix is_zero() after template conversion 2016-05-17 15:49:29 -07:00
Andrew Tridgell
7b47d54d6b AP_Common: workaround for SITL on windows 2016-05-17 20:55:57 +10:00
Lucas De Marchi
fa6f2c6b67 AP_Math: fix some coding style mistakes 
- fix alignement of &
    - remove const from bool arguments
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
0c31354539 AP_Compass: implement completion mask 
Fill the completion mask and send that through MAVLink while calibrating the
compass.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
390b196eda AP_Math: AP_GeodesicGrid: add notice for auto generated code 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
b3068baa11 AP_Math: add geodesic_grid toolset 
That was used to aid development AP_GeodesicGrid and understanding its
concepts.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
9d34b3b996 AP_Math: AP_GeodesicGrid: make all methods static 
Since all members are.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
3b05ec1157 AP_Math: make vectors and matrix constructors constexpr 
That allows some object to be constructed at compile time.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
77223a7fcb AP_Math: AP_GeodesicGrid: make data static 
That gives the change of storing that data in flash storage in some
architectures. That doesn't happen yet though, some extra changes are required
for that to happen.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
fd2428db34 AP_Math: AP_GeodesicGrid: reduce number of _neighbor_umbrellas items 
Only the first half is necessary. The values for the other half can be derived.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
43d9e00ab7 AP_Math: AP_GeodesicGrid: use uint8_t for _neighbor_umbrellas 
All integers there are limited to the range [0,20), so uint8_t is enough.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
54889e4175 AP_Math: AP_GeodesicGrid: reduce number of inverses by half 
We don't actually need all of them, since the second half is for the opposite
triangles. In that case we just need to negate the resulting vector when
changing basis.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
f31161ecb6 AP_Math: AP_GeodesicGrid: remove triangles 
There's no need to keep those triangles, since we just need the inverses.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
b34c04a4f9 AP_Math: test_geodesic_grid: test also non-centroid vectors 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
8e8ab3af96 AP_Math: AP_GeodesicGrid: remove section_triangle() function 
That function was only being used by the unit tests and the benchmark. In order
to remove memory usage, the triangles will be removed, since we don't actually
need to keep them in real situations. Thus, this patch removes that function
and copy those triangles to the test and benchmark.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
c7eb46fae2 AP_Math: AP_GeodesicGrid: optimize _from_neighbor_umbrella() 
This is the second optimization. With that we don't have to iterate over the
umbrella's components.

The table below summarizes the mean CPU time in ns from the brenchmark results
on an Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz processor:

       | Naive implementation | First Optimization | Second Optimization
------------------------------------------------------------------------
Min.   |                 26.0 |              28.00 |                26.0
1st Qu.|                 78.0 |              48.75 |                39.0
Median |                132.0 |              57.00 |                41.0
Mean   |                130.1 |              61.20 |                41.6
3rd Qu.|                182.2 |              76.00 |                47.0
Max.   |                234.0 |              98.00 |                54.0
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
eb90ef23a1 AP_Math: AP_GeodesicGrid: fix algorithm for null vector 
If v is the null vector, then alpha * v is still the null vector for any alpha
as a real number. That means that the null vector doesn't cross any section.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
c28c3265c8 AP_Math: AP_GeodesicGrid: optimize with neighbor umbrellas 
This is a first optimization of the algorithm. The struct for the neighbor
umbrella has only one member, but new members will be added in the next
optimization.

The table below summarizes the mean CPU time in ns from the brenchmark results
on an Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz processor:

Cases  | Naive implementation | First Optimization
--------------------------------------------------
Min.   |                 26.0 |              28.00
1st Qu.|                 78.0 |              48.75
Median |                132.0 |              57.00
Mean   |                130.1 |              61.20
3rd Qu.|                182.2 |              76.00
Max.   |                234.0 |              98.00

This optimization reduces the mean time for the worst case (Max. line) by more
than 50%.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
0ff05b7af3 AP_Math: test_geodesic_grid: test triangles indexes 
That helps figuring out which intermediate step failed the high level call.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
4398e1e49b AP_Math: AP_GeodesicGrid: change order of triangles 
- Change the order of the icosahedron triangles so that there's a uniform way of
finding the opposite triangle. The order visually still makes sense.

 - Change test to accommodate the order change.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
ea412ad629 AP_Math: benchmark_geodesic_grid: add benchmark 
That will help to benchmark improvements on the section search algorithm.
 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
797a2da031 AP_Math: test_geodesic_grid: test when inclusive=true 2016-05-16 19:08:36 -03:00
Gustavo Jose de Sousa
b299261ad4 AP_Math: AP_GeodesicGrid: add first implementation 
The search for the geodesic section is still naive in this version.
Additionally, add unit tests.
 2016-05-16 19:08:35 -03:00
Gustavo Jose de Sousa
3f2ad764ca AP_Math: Matrix3: add inverse() and invert() functions 
Additionally, add unit tests.
 2016-05-16 19:08:35 -03:00
Gustavo Jose de Sousa
06eea2838f AP_Math: Matrix3: add det() function 
Function to calculate determinant. Additionally, add unit tests.
 2016-05-16 19:08:35 -03:00
Gustavo Jose de Sousa
26959f1448 AP_Math: define golden ratio constant 2016-05-16 19:08:35 -03:00
dgrat
f8540f1a80 AP_Compass: Do not use is_zero() for non-float types 2016-05-16 19:08:35 -03:00
dgrat
7ff8004f8f AP_Math: Replace is_zero() with a template function 
This function only makes sense for floating point types. However this
function was also used for ints.
 2016-05-16 19:08:35 -03:00
Tom Pittenger
ebd993dabb AP_Arming: updated z-axis accel threshold comment 2016-05-16 13:46:17 -07:00
Tom Pittenger
9073ac91ff AP_Mission: 2of3 add loiter_xtrack option flag for post-loiter navigation via param4 
0 to crosstrack from center of waypoint, 1 to crosstrack from tangent exit location
 2016-05-16 11:50:54 -07:00
Tom Pittenger
02eeb2d4f0 AP_Common: 1of3 add loiter_xtrack option flag for post-loiter navigation 
0 to crosstrack from center of waypoint, 1 to crosstrack from tangent exit location
 2016-05-16 11:50:53 -07:00
Gustavo Jose de Sousa
2246343ec7 AP_HAL_SITL: pass signed value to abs() 
Passing an unsigned value to abs() causes compilation error in gcc 6.1.1
(and doing that doesn't make sense too).

As a bonus, this patch fixes the code, since, for two unsigned integers
a and b, such that a > b, (a - b) without the casting to a signed
integer would produce garbage in the context of this patch. The type
int32_t is enough for the cases covered by this patch.
 2016-05-16 15:04:22 -03:00
Lucas De Marchi
421b9ef54a AP_Mount do not use flexible array in union 
We actually don't want a flexible array in this union, but rather a way
to access it byte by byte. This fixes the build for gcc >= 6

In file included from ../../libraries/AP_GPS/AP_GPS_UBLOX.cpp:23:0:
../../libraries/AP_GPS/AP_GPS_UBLOX.h:387:23: error: flexible array member in union
         uint8_t bytes[];
                       ^
compilation terminated due to -Wfatal-errors.

In file included from ../../libraries/AP_Mount/AP_Mount.cpp:9:0:
../../libraries/AP_Mount/AP_Mount_Alexmos.h:291:23: error: flexible array member in union
         uint8_t bytes[];
                       ^
compilation terminated due to -Wfatal-errors.
 2016-05-16 13:50:56 -03:00
Lucas De Marchi
39bd196481 AP_GPS: do not use flexible array in union 
We actually don't want a flexible array in this union, but rather a way
to access it byte by byte. This fixes the build for gcc >= 6

In file included from ../../libraries/AP_GPS/AP_GPS.cpp:24:0:
../../libraries/AP_GPS/AP_GPS_ERB.h:93:23: error: flexible array member in union
         uint8_t bytes[];
                       ^
compilation terminated due to -Wfatal-errors.

In file included from ../../libraries/AP_GPS/AP_GPS_ERB.cpp:22:0:
../../libraries/AP_GPS/AP_GPS_ERB.h:93:23: error: flexible array member in union
         uint8_t bytes[];
                       ^
compilation terminated due to -Wfatal-errors.

In file included from ../../libraries/AP_GPS/AP_GPS_MTK.cpp:25:0:
../../libraries/AP_GPS/AP_GPS_MTK.h:75:23: error: flexible array member in union
         uint8_t bytes[];
                       ^
compilation terminated due to -Wfatal-errors.

In file included from ../../libraries/AP_GPS/AP_GPS_MTK19.cpp:26:0:
../../libraries/AP_GPS/AP_GPS_MTK.h:75:23: error: flexible array member in union
         uint8_t bytes[];
                       ^
compilation terminated due to -Wfatal-errors.

In file included from ../../libraries/AP_GPS/AP_GPS_SIRF.cpp:22:0:
../../libraries/AP_GPS/AP_GPS_SIRF.h:101:23: error: flexible array member in union
         uint8_t bytes[];
                       ^
compilation terminated due to -Wfatal-errors.

In file included from ../../libraries/AP_GPS/AP_GPS_UBLOX.cpp:23:0:
../../libraries/AP_GPS/AP_GPS_UBLOX.h:387:23: error: flexible array member in union
         uint8_t bytes[];
                       ^
compilation terminated due to -Wfatal-errors.
 2016-05-16 13:50:39 -03:00
Gustavo Jose de Sousa
d615628367 AP_HAL_Linux: I2CDevice: add missing stdio.h include 
This was probably being included by another header, but it's not on
gcc >= 6.1 and glibc 2.23.
 2016-05-16 13:12:53 -03:00
Peter Barker
8d5ceda534 AP_HAL_SITL: ensure specified SITL model is found 
Without this check we get a null pointer exception the first time we attempt
to use the model object
 2016-05-16 13:04:15 -03:00
Andrew Tridgell
c6620b03b4 HAL_SITL: added --rtscts option to SITL 
useful for radio testing
 2016-05-16 16:51:26 +10:00
Rustom Jehangir
39fc17f384 DataFlash: Fix parameter description for param_parse.py 2016-05-16 11:09:31 +10:00
Andrew Tridgell
8571202199 AP_RPM: allow for low RPM measurements on PX4 
this automatically adjusts the timer resolution to allow for low RPM
measurements on PX4
 2016-05-14 18:05:13 +10:00
Tom Pittenger
38b7d7e1c6 DataFlash: log baro drift offset 2016-05-13 17:22:12 -07:00
Tom Pittenger
f1f58e2026 AP_Baro: created baro drift offset accessor 2016-05-13 17:22:11 -07:00
Tom Pittenger
f1186b8b5c AP_Mission: store previous nav cmd id 2016-05-13 17:22:03 -07:00
Tom Pittenger
d900988a23 DataFlash: Log airspeed.Use 2016-05-13 17:22:02 -07:00
Jonathan Challinger
0281b948df AP_Arming: loosen accelerometer consistency check on Z axis 
Original author @jschall via 88f5d9f858
 2016-05-13 17:16:12 -07:00
Tom Pittenger
d55050e5e3 AP_Baro: slow down the LPF for slewing to a new GND_ALT_OFFSET 
Instead of a couple seconds, make it about 15sec. This makes TECS happy by not glitching the height demand as much. When applied too fast the TECS height demand causes a large single oscillation as it chases the filter lag.
 2016-05-13 17:15:53 -07:00
Tom Pittenger
37ee3b44d2 AP_Baro: add accessor for baro drift 2016-05-13 17:15:41 -07:00
Tom Pittenger
2e1eef7cf0 AP_Airspeed: airspeed healthy should also check if enabled 2016-05-13 17:14:55 -07:00
Andrew Tridgell
e3107a7e10 AP_HAL: fixed optflow typos 2016-05-14 08:26:10 +10:00
Andrew Tridgell
1b7830c577 AP_SpdHgtControl: update for changed API 2016-05-14 08:26:10 +10:00
Andrew Tridgell
98a86bd205 AP_TECS: create TEC2 log message for detailed energy internals 2016-05-14 08:26:10 +10:00
Andrew Tridgell
ff97f52555 AP_TECS: removed log_tuning structure 2016-05-14 08:26:10 +10:00
Andrew Tridgell
bc911d15d1 AP_TECS: convert to using Log_Write 
preparation for a TEC2 message
 2016-05-14 08:26:10 +10:00
Andrew Tridgell
9a6ac77c64 AP_TECS: prevent large glitches in the specific energy integrator 
this tries to prevent problems like in issue#4066, or at least
reducing the impact when it happens
 2016-05-14 08:26:10 +10:00
Andrew Tridgell
c52451b01b AP_TECS: rename some variables to make them clearer 2016-05-14 08:26:09 +10:00