Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,714 Commits 71 Branches 509 Tags 714 MiB
Commit Graph

1673 Commits

Author SHA1 Message Date
Andrew Tridgell e0b6ed12be MAVLink: rename the message_definitions directory 2012-07-26 10:03:36 +10:00
Andrew Tridgell b4fc025151 MAVLink: removed MAVLink 0.9 message definitions 
we are now 1.0 only
 2012-07-26 10:03:36 +10:00
rmackay9 960c2f08af AP_Mount: addition of Amilcar's mount_type 
set_roi_cmd modified to take a Location.  I know the intention was for set_roi_cmd to interpret the MAVLink command directly but unfortunately in arduCopter missions are only made up of waypoints (which are Locations).
 2012-07-25 11:00:38 +09:00
Jonathan Challinger 21f0ed00b3 AHRS: normalise GA_b before computing error vector only if too large 
When GA_b is small the direction of the vector is unreliable, so
normalising can exacerbate the error in the direction
 2012-07-23 17:16:50 +10:00
Andrew Tridgell 99410cbbfe AP_AnalogSource: fixed reporting of VCC 
the VCC pin number should not be converted
 2012-07-21 19:49:24 +10:00
Andrew Tridgell 5f5c884a6d AHRS: if we don't have gps correction enabled, zero the yaw correction 2012-07-20 17:21:04 +10:00
Andrew Tridgell 4f41b876b1 AHRS: allow the gps/accelerometers to control yaw when rolled 
this solves a problem with yaw estimation when at high roll angles,
when the compass code becomes ineffective
 2012-07-20 11:50:04 +10:00
Andrew Tridgell 404803a734 MAVLink: imported updated generated mavlink C code 
no functionality changes
 2012-07-20 11:50:03 +10:00
Jason Short 25c3ed6c4b Oilpan ADC parameters added 
including a function that configures each Accel Axis
Defaults matching old behavior
Added param group
 2012-07-18 22:57:11 -07:00
Jason Short 8a4a9a929e Lead Filter: simplified calculation 2012-07-18 22:57:10 -07:00
Andrew Tridgell f704408094 GPS-UBlox: removed duplicate config messages 
these were left over from debugging
 2012-07-19 15:23:15 +10:00
Amilcar Lucas 13fb2e6dc9 RC_Channel parameters: Fix a typo 2012-07-18 22:39:49 +02:00
Amilcar Lucas dea5b88379 Support up to 7 aux servo outputs 2012-07-18 21:58:22 +02:00
rmackay9 a2e6af1f9c AP_Mount: added set_manual_rc_channel and set_manual_rc_channel_function to allow input of pitch, roll and yaw controls from a regular RC_Channel (i.e. not RC_Channel_aux) 
For now, angles red in are always of the range -45 deg ~ 45 deg which is consistent with the existing arducopter implementation but should be improved to scale the pilot's input to the mount's actual range.
 2012-07-18 23:20:05 +09:00
Amilcar Lucas 8acc432084 Replace long with int32_t 2012-07-18 02:12:31 +02:00
Amilcar Lucas f5c2ffca34 Use ascending order in the values 2012-07-18 02:11:49 +02:00
Amilcar Lucas 23f009f665 Improve parameter documentation, it still does not work, but is an improvement. 
I just do not understand why these parameters do not appear in Mission planner :(
 2012-07-17 23:32:30 +02:00
Michael Oborne b97f9bb803 Airspeed Library - fix param names. 
The Group definition give the start of the param name.
This way we can maintain multiple instances if required of the same library as options.
 2012-07-16 21:48:47 +08:00
Andrew Tridgell dfb22554aa Airspeed: Added AP_Airspeed sensor library 
this will allow an airspeed sensor object to be passed to AHRS for
dead reckoning
 2012-07-16 11:21:20 +10:00
rmackay9 bec5321b8b AP_MotorsMatrix: small bug fix to limit checking on remove_motor call. Fix thanks to Michael Peschel! 2012-07-16 00:38:58 +09:00
rmackay9 3b9a1d4305 RC_Channel_aux: added enable_out method to help stop servos from moving before the mount has initialised. 
changed parameter names of "update_aux_servo_function" to make it more clear that any 4 servos can be passed in (not just servos 5~8).
Also allowed NULL servos to be passed in as parameters because we only need 3 in ArduCopter.
 2012-07-15 16:28:53 +09:00
rmackay9 e83275d8ae AP_Camera: changed "int" to "int16_t" and "long" to "int32_t" here and there. 2012-07-15 16:26:12 +09:00
Andreas M. Antonopoulos 31fd74d94c AP_Limits library, provides modular "limits" such as altitude and geo-fencing. 2012-07-14 19:26:17 -07:00
Michael Oborne 804898c2a5 fix param config names 2012-07-14 15:34:15 +08:00
Robert Lefebvre 716ce6a5a7 Change to prevent Tricopter servos from going hard-over during Disarmed state. 
Believe this was an oversight when the change to AP_Motors went in.
 2012-07-13 23:12:26 -04:00
Robert Lefebvre ab1212d8d2 Instituting Yaw Differential on Multirotors. Intent is to stop "rise on yaw input". 
Since motors with increasing speed due to yaw input seem to generate more thrust that motors that slow lose thrust, thus net thrust goes up, causing copter to climb.
Values are a guesstimate, proven out by test flying.  This could probably become a parameter.
 2012-07-13 22:59:28 -04:00
Andreas M. Antonopoulos 9dfb3c4db9 Added Michael Pursifull's Maxsonar HRLV model support 2012-07-11 18:46:47 -07:00
rmackay9 d3426420ad AP_Camera: moved seme constructor initialisers around to remove compile warnings 2012-07-12 09:33:22 +09:00
rmackay9 1105a35c77 AP_AnalogSource_Arduino: fix to allow analog port to be read to be specified as a "channel" (i.e. A0) 
Also fixed example range finder sketch to work with interrupt enabled AP_AnalogSource_Arduino class
 2012-07-11 21:19:17 +09:00
Amilcar Lucas eb647b5320 AP_Mount: add support for non-spring-loaded joysticks 2012-07-11 00:07:33 +02:00
Amilcar Lucas ad60fac863 RC_Channel: improve parameter documentation 2012-07-11 00:07:10 +02:00
Amilcar Lucas 42301af148 Remove unused function, remove unnecessary angle wrapping. 2012-07-11 00:06:45 +02:00
Amilcar Lucas 74ef712cd1 Allow mount control when no AHRS exists 
Allow mount control on non stabilized axes
 2012-07-11 00:06:26 +02:00
Andrew Tridgell 63a83b95b4 AP_Math: added get_distance_cm() to return in centimeters 2012-07-11 07:49:05 +10:00
Andrew Tridgell 15133b1105 AHRS: fixed HIL build 2012-07-10 18:02:05 +10:00
Andrew Tridgell 9b6acf168e AHRS: added AHRS_GPS_GAIN parameter 
this allows control of how much GPS velocity information is used in
doing centripetal correction in DCM
 2012-07-10 16:22:48 +10:00
Andrew Tridgell 2bc530d04f AP_Param: added some docs on the eeprom header format 2012-07-10 14:03:49 +10:00
Craig Elder 0534ac12b1 DataFlash: The current method for checking if chip erase worked is producing false positives. We are forcing the block erase until we have a deterministic test method. 2012-07-09 15:23:35 -07:00
Amilcar Lucas a79f55656a RC_Channel: Improve documentation 2012-07-07 21:57:30 +02:00
Amilcar Lucas 8bd7ef9b9a AP_Mount: Fix radians/degrees scaling regressions 
Rename calculate() into stabilize()
Implement MAV_MOUNT_MODE_RC_TARGETING initialization
Document to make sure this radians/degrees mess up does not happen again
 2012-07-07 21:56:56 +02:00
Andrew Tridgell ec70e87495 AnalogSource: prevent a division by zero on zero ADC data 2012-07-06 19:59:18 +10:00
Andrew Tridgell 7bc724d118 APM: changed PID library to do automatic deltat calculation 
this fixes a problem with the HDNG2RLL PID, which was using the wrong
time base and prevents similar bugs from happening in the future
 2012-07-06 19:59:18 +10:00
Andrew Tridgell 44755bf3ce AP_Baro: improved barometer averaging 
this changes the barometer calculations to floating point. On a MS5611
this is actually about twice as fast as the previous 64 bit
calculations, but gains us more accuracy as we are able to take
advantage of sub-bit precision when we average over 8 samples.
 2012-07-06 15:11:30 +10:00
Andrew Tridgell 43d6015811 Filter: split the DerivativeFilter steps into update() and slope() 
this allows us to apply new data at a different rate than we calculate
the slope.
 2012-07-06 15:11:30 +10:00
Andrew Tridgell 4723698489 AP_Baro: update MS5611 test to use baro library altitude 2012-07-06 15:11:30 +10:00
Andrew Tridgell 9845a55cb1 AHRS: make the yaw independent drift correction optional and disable 
the new correction algorithm copes poorly with gyro drift, leading to
signification attitude errors in the face of drift
 2012-07-06 15:11:30 +10:00
Andrew Tridgell e33554a1f9 AHRS: only enable barometer for AHRS if it is smooth enough 
if we used less than 5 samples to compute the pressure then don't use
it for climb rate
 2012-07-05 16:29:21 +10:00
Andrew Tridgell 1ce4a03147 SITL: lower baro noise a bit 2012-07-05 16:29:21 +10:00
Andrew Tridgell 9f3da1bf7f Filter: fixed DerivativeFilter example build 2012-07-05 16:29:21 +10:00
Andrew Tridgell 5f38669666 SITL: run the HIL barometer at 80Hz to match APM2 2012-07-05 16:29:21 +10:00