Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
46,782 Commits 71 Branches 509 Tags 758 MiB
Commit Graph

933 Commits

Author SHA1 Message Date
Andrew Tridgell ebc1f9acf6 AP_HAL: removed assert calls 
these waste flash space and do not do us any good
 2021-03-25 14:03:40 +11:00
Andrew Tridgell 7010eae9e8 AP_HAL: remember details of register check fails 
this allows for logging of register resets
 2021-02-24 18:18:37 +11:00
Andy Piper a07b238c7d AP_HAL: add PRIORITY_RCOUT 
don't allow UART copies
add @SYS/uarts.txt
 2021-02-20 14:37:11 +11:00
Patrick José Pereira 12cd138030 AP_HAL: Remove pointer check before delete 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2021-02-04 09:01:19 +11:00
Andy Piper 0eff201016 AP_HAL: add mem_info() 
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
 2021-02-03 23:35:44 +11:00
Patrick José Pereira 6899c0b5af AP_HAL: Add missing const in member functions 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2021-02-03 18:45:14 +11:00
Arsh 18f56fbac5 AP_HAL:examples:Printf: Improvements in the Printf example 2021-02-03 13:02:49 +11:00
Andrew Tridgell 6163659887 AP_HAL: prevent a single bad transfer causing an IMU to be marked unhealthy 
This is a response to this issue:
https://discuss.ardupilot.org/t/gyro-problem-after-waypoint-log-analisys

The 2nd gyro went bad with a large offset. Then the first gyro was
marked unhealthy, forcing the EKF to switch to the 2nd gyro. That
resulted in a crash.

I think the SPI bus was getting bad transfers and the register check
code happened to get a bad transfer, thereby marking the first gyro
unhealthy

This change ensures we only fail the register check if two transfers
in a row are bad. This makes it much less likely that a noisy bus will
lead to an unhealthy gyro
 2021-01-27 09:47:55 +11:00
Andrew Tridgell 1680e6e7d6 AP_HAL: expose load_persistent_params() in hal.util 2021-01-21 13:09:21 +11:00
Andrew Tridgell a9f8c9517c AP_HAL: added vnav linux target 2021-01-20 10:06:45 +11:00
Andrew Tridgell 6ca68bfba3 AP_HAL: enable 32k storage on SITL 2021-01-16 06:47:10 +11:00
Andrew Tridgell 75c789fc57 AP_Baro: added ExternalAHRS backend 2021-01-05 21:13:12 +11:00
Arsh 3d5addeee0 AP_HAL:examples:AnalogIn: Added comments in the AnalogIn example 2021-01-05 20:43:04 +11:00
Andrew Tridgell 96cbde0ee6 AP_HAL: use ExpandingString class 2021-01-05 10:52:00 +11:00
Tom Pittenger afaca30075 AP_HAL: add helpers le24toh_ptr(), be24toh_ptr(), put_le24_ptr(), put_be24_ptr() 2020-12-30 17:56:38 -08:00
Andy Piper 1c79f22ba2 AP_HAL: make erpm accessible from RCOutput 
give access to erpm error rate
add bi-directional dshot mask modifier
 2020-12-30 19:14:16 +11:00
Andy Piper 9e7c60178d AP_HAL: rename system_initialized() and add is_system_initialized() 2020-12-30 18:16:59 +11:00
Andy Piper c8e464ebea AP_HAL: add HAL_ENABLE_THREAD_STATISTICS to boards 2020-12-30 18:15:05 +11:00
Ari Krupnik cfb1213f43 AP_HAL: standard spelling of variant 2020-12-25 00:01:50 +11:00
Andrew Tridgell 19723e6e75 AP_HAL: make uart pointers private 
this ensures they cannot be used by library or vehicle code, so we
will be able to remove them in future
 2020-12-15 10:32:46 +11:00
Andrew Tridgell 195ec0316a AP_HAL: fixed example fw for SERIAL naming 2020-12-15 10:32:46 +11:00
Andrew Tridgell 95c0852b13 AP_HAL: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell 8678759da4 AP_HAL: added hal.serial() access to uarts 
this gives access to serial ports in the SERIALn_ order. It is inlined
by the compiler so using hal.uartB and hal.serial(3) generates
idential code on stm32 (tested on H7).

This is a step towards eliminating hal.uartX completely and the
horrible uartB ordering
 2020-12-15 10:32:46 +11:00
Tom Pittenger 6630645915 AP_HAL: ap_periph should disable HAL_SUPPORT_RCOUT_SERIAL by default 2020-12-09 07:53:09 -08:00
Andy Piper d2e01005ee AP_HAL: add support for @SYS/dma.txt for DMA contention 2020-12-02 18:17:23 +11:00
Andrew Tridgell 68fdf033ee AP_HAL: support uartI, allowing a total of 9 uarts 
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
 2020-11-30 14:09:31 +11:00
Tom Pittenger 089f3aa349 AP_HAL: allow hwdef to define HAL_SUPPORT_RCOUT_SERIAL - must be disabled for AP_Periph 2020-11-25 14:20:53 +11:00
Andrew Tridgell 5e8380ff41 AP_HAL: allow replay on ChibiOS 2020-11-10 16:15:45 +11:00
Andrew Tridgell 2596875ceb AP_HAL: removed fs_init() 
this must go via AP_Filesystem
 2020-10-27 10:45:03 +11:00
Peter Barker 3cce6197a1 AP_HAL: delete copy constructors 2020-10-13 19:55:34 +11:00
Pierre Kancir 1c80b04544 AP_HAL: add virtual set_cmdline_parameters() 2020-10-13 10:31:21 +11:00
Peter Barker 9bde294112 AP_HAL: add chargen UARTDriver example 2020-10-09 19:14:59 +11:00
bugobliterator d1eb9e8aea AP_HAL: add FilteredCAN mode to tell driver to init as such 2020-10-08 09:31:35 +11:00
mhefny 1200d0e2f8 AP_HAL: add PROBE_IMU_I2C2 to linux.h 2020-10-06 09:27:26 -07:00
Andrew Tridgell c62b86e3c1 AP_HAL: added timer_tick() on GPIO 2020-10-02 09:38:24 +10:00
Siddharth Purohit 22ab426cf2 AP_HAL: make bools to use single bit in CANTxItem 2020-09-24 12:32:19 +10:00
Siddharth Purohit 0ca2f56b71 AP_HAL: add support for external buffer to be used in ByteBuffer 2020-09-24 12:32:19 +10:00
Siddharth Purohit 9aa0970eed AP_HAL: disable protocol drivers for bootloader builds 2020-09-24 12:32:19 +10:00
Siddharth Purohit c7d69e4d13 AP_HAL: disable CAN Protocol Drivers for AP_Periph 2020-09-24 12:32:19 +10:00
Andy Piper ad895c2654 AP_HAL: ringbuffer get_size cannot be const because of semaphore 2020-09-22 09:37:02 +10:00
Andrew Tridgell 4b1552eebe AP_HAL: added BUS_TYPE_MSP 
for MSP sensors
 2020-09-09 06:35:50 +10:00
Peter Barker 55f72c1534 AP_HAL: create and use new AP_HAL::PWMSource object 2020-09-08 16:10:50 +10:00
Michael du Breuil d905282c1e AP_HAL: Don't redefine allowing double math in SITL/Linux if already defined 2020-09-03 09:56:29 +10:00
Patrick José Pereira 11c19a2dde AP_HAL: RCOutput_Tap_Linux: Include arm/ioctls.h 
Add missing include for TCGETS2 while compile with MUSL

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-08-25 07:15:00 -07:00
Siddharth Purohit 15abca8ba4 AP_HAL: add native clock info methods used inside other than main thread 2020-08-19 17:31:09 +10:00
Siddharth Purohit aa893b3983 AP_HAL: add available method for locked state 2020-08-19 17:31:09 +10:00
Siddharth Purohit fa0f1e4c71 AP_HAL: add CANIface HAL, replace uavcan dependent one 2020-08-19 17:31:09 +10:00
Siddharth Purohit 697e4141cb AP_HAL: add common Event interface 2020-08-19 17:31:09 +10:00
Peter Barker 26666b4b3d AP_HAL: move battery type enumeration out of parameters object 2020-08-11 13:21:52 +10:00
bugobliterator 57dd0ca9ea AP_HAL: add support for Bank based addressing 2020-08-06 12:41:35 +10:00