Andrew Tridgell
debea191c9
SITL: allow sensors not to be present in Morse
2018-12-04 20:49:40 +11:00
Andrew Tridgell
e569e3e1e6
SITL: added parameters for laser scanner example
2018-12-04 18:29:41 +11:00
Andrew Tridgell
e883c6392f
AP_Proximity: added a MorseSITL sensor
...
this interfaces with the laser scanner in morse
2018-12-04 18:29:41 +11:00
Andrew Tridgell
8d86b6fbee
SITL: added support for laser scanner for Morse
2018-12-04 18:29:41 +11:00
Andrew Tridgell
480abeda3e
SITL: improved rover_scanner example
2018-12-04 18:29:41 +11:00
Andrew Tridgell
6786e4b5fc
SITL: added rover_scanner.py example for Morse
2018-12-04 18:29:41 +11:00
Andrew Tridgell
f52af1fc40
SITL: added parsing of variable length vectors for Morse
...
used for laser scanner
2018-12-04 18:29:41 +11:00
Peter Barker
75e63db366
GCS_MAVLink: rename MSG_EXTENDED_STATUS2 to MSG_MEMINFO
2018-12-04 18:01:38 +11:00
Peter Barker
d5322633ed
GCS_MAVLink: rename MSG_RAW_IMU2 and MSG_RAW_IMU3 to reflect what they send
2018-12-04 17:45:32 +11:00
Andrew Tridgell
f0036c59d7
SITL: added rover parameters for morse example
2018-12-04 13:02:29 +11:00
Andrew Tridgell
7c50aacc92
AP_GPS: moved place we graph uart timestamp
2018-12-04 11:37:38 +11:00
Andrew Tridgell
685771c145
AP_GPS: constrain rate_ms from 5Hz to 20Hz
2018-12-04 11:37:38 +11:00
Andrew Tridgell
7a4b8d76c1
AP_GPS: added jitter correction to timestamp calculation
...
this allows for much more accurate (and consistent) timestamping of GPS
messages where the protocol has a ITOW field.
2018-12-04 11:37:38 +11:00
Andrew Tridgell
d761b24b92
AP_GPS: optionally configure a hardware PPS pin for uBlox
...
useful for testing time lag estimation
2018-12-04 11:37:38 +11:00
Andrew Tridgell
2eae4901c1
AP_GPS: look for iTow on uBlox MSG_STATUS
2018-12-04 11:37:38 +11:00
Andrew Tridgell
259723eb26
GCS_MAVLink: use JitterCorrection class
2018-12-04 11:37:38 +11:00
Andrew Tridgell
93abb41e77
AP_RTC: added JitterCorrection class
2018-12-04 11:37:38 +11:00
Andrew Tridgell
b5f3750014
AP_GPS: convert NOVA, SBP and SBP2 to use check_new_itow()
2018-12-04 11:37:38 +11:00
Andrew Tridgell
df68d6413c
AP_GPS: moved iTow handling to GPS_Backend
2018-12-04 11:37:38 +11:00
Andrew Tridgell
4af857da44
AP_GPS: adjust NMEA sentence length calculation
...
review feedback
2018-12-04 11:37:38 +11:00
Andrew Tridgell
3fe4b9c0f8
AP_GPS: make GPS packet timestamps more accurate
...
this reduces the effect of processing time and uart transmit time
2018-12-04 11:37:38 +11:00
Andrew Tridgell
62c26ec5ff
SITL: added parameters for Morse quad
2018-12-04 09:44:50 +11:00
Andrew Tridgell
a4f388e0f3
SITL: improved Morse socket handling
2018-12-04 09:44:50 +11:00
Andrew Tridgell
505bc2b1fc
SITL: added quadcopter example script for Morse
2018-12-04 09:44:50 +11:00
Andrew Tridgell
adb45c261f
SITL: support quad simulation in Morse
2018-12-04 09:44:50 +11:00
Andrew Tridgell
d907c5757d
AP_Motors: added PlusRev motors type
...
this is a plus frame with reversed motor direction, needed for quad in
Morse simulator
2018-12-04 09:44:50 +11:00
Andrew Tridgell
c8c54b369a
SITL: added example script for Morse
2018-12-04 09:44:50 +11:00
Andrew Tridgell
fea5060429
SITL: added Morse simulation backend
2018-12-04 09:44:50 +11:00
Andrew Tridgell
d46c48e28c
HAL_SITL: enable morse simulator backend
2018-12-04 09:44:50 +11:00
vierfuffzig
64915c69b6
AP_OSD: check for airspeed object
2018-12-03 07:57:46 +11:00
vierfuffzig
5a262a7f6a
AP_OSD: add secondary airspeed item
2018-12-03 07:57:46 +11:00
Andrew Tridgell
50683633b3
HAL_ChibiOS: setup for brushed feature in IOMCU
2018-11-30 13:14:14 +11:00
Andrew Tridgell
41264568ba
AP_IOMCU: added brushed motor feature bit in protocol
2018-11-30 13:14:14 +11:00
Andrew Tridgell
25247433dc
AP_BattMonitor: added Sum backend type
...
this is used to combine battery monitors into a single reporting
unit. It operates on all instances beyond itself
2018-11-30 13:02:35 +11:00
Andrew Tridgell
3d9126ec4a
AP_Compass: run lsm303d at 91Hz, not 100Hz
...
Peter and I have discovered an odd behaviour with the lsm303d mag. If
you fetch data a bit too soon then it will give a peridic oscillation
in the output.
Checking the data ready bit in the status register doesn't help. The
only fix I've found is to run the sampling at a bit lower rate
2018-11-30 11:39:54 +11:00
Andrew Tridgell
0faab853cb
HAL_ChibiOS: make atob static
...
only used in this file
2018-11-30 11:29:51 +11:00
Andrew Tridgell
9257d29717
SITL: fixed frame_property build error with older C++ compilers
2018-11-30 11:03:09 +11:00
Andrew Tridgell
c72f2e57b0
HAL_SITL: fixed build on older MacOS
2018-11-30 11:03:09 +11:00
Andrew Tridgell
8ea7df3efe
AP_NavEKF2: added filter reset if unhealthy for 5s and disarmed
2018-11-30 11:02:30 +11:00
Andrew Tridgell
c1516da203
AP_Camera: use timestamp from trigger time
...
this avoids time inaccuracy from loop times in timestamps
2018-11-30 10:12:27 +11:00
Andrew Tridgell
19ba2322ac
DataFlash: added timestamp to CAM messages
2018-11-30 10:12:27 +11:00
Andrew Tridgell
8f51bef0f0
HAL_ChibiOS: added 3 tries to microSD MMC init
...
this makes init for MMC/SPI interfaces more reliable
2018-11-29 19:39:11 +11:00
Siddharth Purohit
6a27e8585a
AP_UAVCAN: limit number of file open and close events
2018-11-29 16:36:29 +11:00
Siddharth Purohit
0976019133
AP_UAVCAN: continue dna server setup even if unique id not received
2018-11-29 16:36:29 +11:00
Andrew Tridgell
8c9e9bd415
HAL_SITL: implement get_system_id()
2018-11-29 16:36:29 +11:00
Andrew Tridgell
48475051d9
HAL_Linux: implement get_system_id() on Linux
...
this is needed for UAVCAN dynamic node allocation
2018-11-29 16:36:29 +11:00
Andrew Tridgell
73d6200db4
AP_UAVCAN: use HAL_BOARD_STORAGE_DIRECTORY for node db path
2018-11-29 16:36:29 +11:00
Andrew Tridgell
4cfb1b04ad
AP_HAL: define HAL_BOARD_STORAGE_DIRECTORY for sitl, px4 and chibios
2018-11-29 16:36:29 +11:00
Siddharth Purohit
c37a9966c1
AP_UAVCAN: use const unique id length variable
2018-11-29 16:36:29 +11:00
Siddharth Purohit
e017783f69
AP_UAVCAN: disable server for HAL_PX4 with minimize feature builds
2018-11-29 16:36:29 +11:00