Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
16,117 Commits 70 Branches 507 Tags 662 MiB
Commit Graph

553 Commits

Author SHA1 Message Date
Evan Slatyer c4093b159f ArduPlane failsafes: remove rc_override_active 
- rc_override_active is never set anywhere in the ArduPlane code; it's only used for Copter and Rover. Removing it significantly simplifies the failsafe code.
- modified code has been tested in SITL. Heartbeat and RC failures in AUTO, CRUISE, and RTL modes (covering the three cases in the failsafe check functions) have been simulated with FS_LONG_ACTN = 0, 1, and 2, FS_SHORT_ACTN = 0, 1, and 2, and FS_GCS_ENABL = 0, 1, and 2. In all cases the results are identical to those with the original code.
 2014-11-14 11:35:27 +11:00
Andrew Tridgell c8060cb9f7 Plane: use load factor to limit nav_roll_cd 
this calculates the aerodymanic load factor from smoothed airspeed and
uses it to limit roll to keep it below the level where the load factor
would take us past the aerodymanic limit of the airframe
 2014-11-12 13:36:02 +11:00
Andrew Tridgell 44ee1fcd3c Plane: prevent large G_Dt_max report on startup 2014-11-10 07:09:31 +11:00
Andrew Tridgell 16fd113020 RC_Channel: added channel_function() 
this is used in the plane mixing code
 2014-11-07 10:39:07 +11:00
Andrew Tridgell 913004beb0 Plane: added OVERRIDE_CHAN parameter 
this allows both for testing PX4IO override on the ground, and for
forced manual override while flying, including re-arming after in-air
reboot
 2014-11-07 10:39:07 +11:00
Andrew Tridgell ad58822cb5 Plane: removed impossible boolean check 2014-10-24 22:04:05 +11:00
Andrew Tridgell 959cd11cb1 Plane: save a byte in auto_state 
keep single bits together to save space on APM2
 2014-10-24 22:03:34 +11:00
Michael Day 01f611daa9 Plane: "Go around" operation. Assumes go around behavior follows land wp. 2014-10-24 21:51:46 +11:00
Michael Day c1b949a74f Plane: Bugfix. Changing to landing sequence now works at mission end. 2014-10-24 21:42:06 +11:00
Andrew Tridgell 240e87dc2c Plane: update for new AP_InertialSensor API 2014-10-24 12:10:38 +11:00
Andrew Tridgell 05c325a12a Plane: display min as well as max loop delta_t 2014-10-22 18:27:12 +11:00
Andrew Tridgell f87da51b37 Plane: prevent calling jump_to_landing_sequence() too often 2014-10-20 08:36:20 +11:00
Andrew Tridgell 7ecc87a787 Plane: improved check for reaching RTL point for auto-land 2014-10-20 08:36:20 +11:00
Michael Day be17bfd972 Plane: Added parameter RTL_AUTOLAND and implementation. 2014-10-20 08:36:20 +11:00
Andrew Tridgell 4c984d9331 Plane: start preparing for 3.1.2 2014-10-13 10:25:53 +11:00
Andrew Tridgell 71d786187e Plane: make auto takeoff independent of compass 
this solves a problem of poor initial yaw due to poor compass offsets
causing a takeoff to not be in the direction the plane is pointing. A
summed gyro is used until the GPS speed is above 5m/s for 2 seconds,
then the GPS heading corrected by the summed gyro error is used for L1
based navigation for the rest of the takeoff
 2014-10-07 07:17:46 +11:00
Andrew Tridgell 4b01cee330 Plane: send heartbeat to AFS when calibrating sensors 2014-09-24 12:02:39 +10:00
Andrew Tridgell 7b4181dc14 Plane: prepare for 3.1.1 release 2014-09-12 11:07:26 +10:00
Andrew Tridgell 988662027e Plane: moved LAND_PITCH_CD into TECS 2014-08-27 20:13:19 +10:00
Andrew Tridgell 186806c768 Plane: lowpass the rangefinder correction, not height 
this should produce less lag as the rangefinder correction should be
changing much less
 2014-08-27 18:25:17 +10:00
Andrew Tridgell a6ee46086c Plane: allow continued use of rangefinder data for 5s after loss of contact 
this allows short outages to be ridden out
 2014-08-27 17:14:19 +10:00
Andrew Tridgell b6319a9d19 Plane: keep an estimate of the rangefinder altitude 
only accept data when we have had 10 samples in a row in range at 50Hz
 2014-08-27 17:14:19 +10:00
Andrew Tridgell 5f3ac159ba Plane: start working towards 3.1.1 2014-08-27 17:14:19 +10:00
Andrew Tridgell e880de67ed Plane: prepare for 3.1.0 release 2014-08-26 06:20:37 +10:00
Andrew Tridgell 6e5344bc8d Plane: prepare beta4 2014-08-25 22:20:52 +10:00
Andrew Tridgell 7649907ec2 Plane: run terrain.update() more often 
this provides faster checking of mission waypoints
 2014-08-25 14:55:40 +10:00
Andrew Tridgell f2f730ba9b Plane: added FBWA_TDRAG_CHAN parameter 
this allows for testing taildragger takeoffs in FBWA mode
 2014-08-24 19:39:51 +10:00
Andrew Tridgell 79fa22e4ad Plane: use gcs_send_text_fmt() for SCHED_DEBUG timing 
lets values be saved in mavlink logs
 2014-08-19 10:08:17 +10:00
Andrew Tridgell cf410f8d12 Plane: prepare for 3.1.0-beta3 2014-08-17 18:25:46 +10:00
Andrew Tridgell 1ce3d1d4a4 Plane: update for AFS API change 2014-08-17 18:07:50 +10:00
Andrew Tridgell 9fff67ec89 Plane: update for APM_OBC API change 2014-08-17 09:13:29 +10:00
Andrew Tridgell dad95648a0 Plane: split landing code into landing.pde 
this is in preparation for more complex landing code using the
rangefinder
 2014-08-13 21:38:05 +10:00
Andrew Tridgell 7def71d43a Plane: improved landing approach and flare 
flare if we are within the specified time of landing either vertically
or horizontally
 2014-08-13 21:38:05 +10:00
Andrew Tridgell ce9b14f0c8 Plane: convert to using StorageManager 2014-08-13 18:46:44 +10:00
Andrew Tridgell e6f5a31944 Plane: prepare for 3.1.0-beta2 2014-08-10 07:20:29 +10:00
Andrew Tridgell 5e997b20f6 Plane: move battery init to after parameter load 2014-08-09 22:50:14 +10:00
Andrew Tridgell 2b89d728f3 Plane: rename to 3.1.0-beta1 2014-08-07 14:14:54 +10:00
Andrew Tridgell bfe7c47aea Plane: prepare new beta 2014-08-07 13:28:29 +10:00
Andrew Tridgell 9184e47f84 Plane: added TERRAIN_LOOKAHD parameter 
distance to look forward for terrain following
 2014-08-07 09:31:03 +10:00
Andrew Tridgell 781abc7593 Plane: fix for changed AP_Terrain API 2014-08-06 17:59:19 +10:00
Andrew Tridgell 448b3f60e0 Plane: use dataflash logging for terrain 2014-08-06 17:59:19 +10:00
Andrew Tridgell d54bb68270 Plane: prevent cross-track on some WP types 
when finishing a takeoff or when a user forces a WP change don't do
any cross-tracking. This avoids a problem where the plane tries to
line up with a track completely unrelated to the track currently being
flown
 2014-08-04 21:02:13 +10:00
Andrew Tridgell 09a679368b Plane: use bitfields in auto_state 2014-08-04 21:02:13 +10:00
Andrew Tridgell 8610d9a8ea Plane: added GLIDE_SLOPE_MIN parameter 
this is used to prevent slow glide slopes being used for small
altitude changes in missions. This allows more accurate tracking of
altitude with terrain changes
 2014-08-04 21:02:13 +10:00
Andrew Tridgell b64ab07ca4 Plane: added STAB_PITCH_DN_CD parameter 
this adds some down trim when at throttle levels below the trim
throttle in FBWA mode.

defaults to 200 centi-degrees. I may adjust based on flight tests
 2014-08-03 17:17:20 +10:00
Matthias Badaire 57253fc2ee Rover: Add SERIAL2_PROTOCOL for GCS and FRSky telemtry 
This allows selection of protocol type on telem2. The default is MAVLink, but can be selected as FrSky protocol
 2014-07-29 17:08:20 -07:00
Andrew Tridgell b158b7e5a9 Plane: replace HAVE_AP_TERRAIN with AP_TERRAIN_AVAILABLE 2014-07-25 07:59:54 +10:00
Andrew Tridgell 3e320d71ab Plane: added TERRAIN_FOLLOW parameter 
when enabled RTL, CRUISE and rally points will use terrain altitude
 2014-07-24 21:50:19 +10:00
Andrew Tridgell d18c00d6fc Plane: split up altitude handling 
this creates altitude.pde for altitude handling, getting ready to add
terrain following
 2014-07-24 21:50:19 +10:00
Andrew Tridgell 32bfeed169 Plane: incorporate terrain mavlink calls 2014-07-24 21:45:47 +10:00
Andrew Tridgell e725b2c77e Plane: added terrain object 2014-07-24 21:45:46 +10:00
Andrew Tridgell ae29a24348 Plane: use sensors from board subtypes 2014-07-14 09:44:35 +10:00
Andrew Tridgell f6bba74fb6 Plane: enable MPU9250 for Linux build 2014-07-14 09:44:34 +10:00
Andrew Tridgell 473865ccc1 Plane: prepare for 3.0.4-beta3 2014-07-11 07:40:59 +10:00
Randy Mackay aef746b3b1 Plane: pass in compass to Arming constructor 2014-07-10 22:51:29 +09:00
Andrew Tridgell 28e1449e8d Plane: updates for new AP_RangeFinder API 2014-07-08 15:07:50 +10:00
Andrew Tridgell 105382bf21 Plane: release 3.0.4beta2 2014-06-07 20:52:08 +10:00
Andrew Tridgell ea086fa79c Plane: added MAV_CMD_DO_INVERTED_FLIGHT support 
allows for mission control over inverted flight
 2014-06-05 16:12:10 +10:00
Andrew Tridgell 55e7f9b1d6 Plane: calculate next_turn_angle to prevent early WP completion 
this should help for ball drop and camera trigger with straight line
runs
 2014-06-05 09:35:09 +10:00
Andrew Tridgell a7868dd6b3 Plane: fixed zero throttle in FBWA glide failsafe 2014-06-04 09:39:45 +10:00
Andrew Tridgell 055d8fe7aa Plane: added TKOFF_THR_MAX parameter 2014-05-24 22:19:50 +10:00
Andrew Tridgell 286479ee93 Plane: prevent stalled takeoff with bad TKOFF_TDRAG_SPD1 
go to level pitch if pitch rises by 10 degrees
 2014-05-23 07:30:59 +10:00
Andrew Tridgell d87619c2f1 Plane: added 4 new parameters to control takeoff 
this gives flexible control for taildragger takeoff
 2014-05-23 07:30:58 +10:00
Andrew Tridgell 2a230b2703 Plane: set version to 3.0.4beta 2014-05-19 22:03:18 +10:00
Andrew Tridgell 8c5226a17a Plane: prepare for release of 3.0.3 2014-05-19 09:54:15 +10:00
Andrew Tridgell 3a73878ca7 Plane: mark 3.0.3beta 2014-05-15 22:59:02 +10:00
Andrew Tridgell f233f95785 Plane: prepare for release of 3.0.2 2014-05-04 16:04:08 +10:00
Andrew Tridgell 92714b09d2 Plane: added ATRP log header to plane log headers 
too many people can't understand how to download .bin logs
 2014-04-30 21:22:28 +10:00
Andrew Tridgell 0408c11637 Plane: mark 3.0.2beta 2014-04-29 11:56:52 +10:00
Andrew Tridgell 0306dbf5f1 Plane: moved auto mode variables to auto_state 2014-04-27 15:34:30 +10:00
Andrew Tridgell 08412391f5 Plane: fixed a bug when switching to another mode from auto takeoff 
when you exit auto and a takeoff is still in progress the flight stage
was not updated, which led to the throttle staying at maximum

Many thanks to Marco for finding this!
 2014-04-23 21:18:11 +10:00
Andrew Tridgell 2ab4ffef45 Plane: use new APM_OBC API 2014-04-21 11:52:53 +10:00
Michael Day 568fc9e6c9 Plane: Now using AP_Rally library. 2014-04-19 09:16:05 +10:00
Andrew Tridgell 8a20130ca8 Plane: changed for APM_Control API 2014-04-12 18:22:01 +10:00
Andrew Tridgell 1bce4239a3 Plane: added AUTOTUNE flight mode 
this is just like FBWA, but with automatic roll/pitch tuning
 2014-04-12 14:12:14 +10:00
Andrew Tridgell d37f1a1376 Plane: updates for OBC API change 2014-04-11 16:47:40 +10:00
Andrew Tridgell 4d990fa6c8 Plane: ensure we log both GPS at the time we receive a msg 2014-04-10 10:29:53 +10:00
Andrew Tridgell e79f1d0940 Plane: prepare for release of 3.0.1 2014-04-10 07:52:36 +10:00
Andrew Tridgell affcea5342 Plane: fixed typo in VRBrain port 2014-04-08 21:22:05 +10:00
Emile Castelnuovo a111d174c1 Plane: added VRBRAIN #defines and #includes 2014-04-08 16:19:20 +10:00
Andrew Tridgell d2d9ad5bbd Plane: prepare for 3.0.0 release 2014-04-08 09:46:30 +10:00
Andrew Tridgell 1fe7b2fe18 Plane: update for new APM_OBC API 2014-04-07 07:28:35 +10:00
Andrew Tridgell 5a84fb96ed Plane: build fix 2014-04-03 20:54:50 +11:00
Andrew Tridgell 1efadb7a05 Plane: fixed some warnings 2014-04-03 12:48:06 +11:00
Andrew Tridgell e19341ca32 Plane: convert to new GPS driver API 2014-04-01 06:38:24 +11:00
Andrew Tridgell 958e17f4ff Plane: use AP_GPS_Auto for 2nd GPS 2014-04-01 06:38:23 +11:00
Andrew Tridgell bcbdb15c7d Plane: changed version to 2.79beta1 2014-03-28 09:47:59 +11:00
Michael Day 25f23cf16c Plane: Sends MAV_SYS_STATUS_GEOFENCE and also allows GCS to enable/disable fence. 2014-03-27 09:26:20 +11:00
Andrew Tridgell ce3f40b095 Plane: use should_log() for more msgs 2014-03-19 14:18:14 +11:00
Andrew Tridgell 0d39f354b0 Plane: use new common MAVLink code 2014-03-19 12:13:38 +09:00
Andrew Tridgell 4bf140aeac Plane: make next_WP and prev_WP be locations 
having a command ID in them doesn't really make sense

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:12:39 +09:00
Randy Mackay f1b97fee53 Plane: correct typo re RTL home with no mission 2014-03-19 12:12:33 +09:00
Randy Mackay 7f21e3885e Plane: RTL home when AUTO run with no mission 2014-03-19 12:12:31 +09:00
Randy Mackay 6b789cd711 Plane: rename next_nav_command to auto_rtl_command 
This command is only used to get the vehicle home (or to a rally point)
after the mission has completed
 2014-03-19 12:12:30 +09:00
Andrew Tridgell 3e05baf95c Plane: fixed build (forward declarations) 2014-03-19 12:12:25 +09:00
Andrew Tridgell 2b5bf45e83 Plane: only activate mission callbacks in AUTO mode 2014-03-19 12:12:24 +09:00
Randy Mackay 693ce27bf6 Plane: pass eeprom start to Mission constructor 2014-03-19 12:11:58 +09:00
Randy Mackay 802ab79c84 Plane: bug fix for setting flight_stage based on current command 2014-03-19 12:11:19 +09:00
Randy Mackay c4364a8ff5 Plane: remove unused nonnav_command variables 
non_nav_command_ID and next_nonnav_command variables removed
 2014-03-19 12:11:18 +09:00
Andrew Tridgell f036aa1780 Plane: fixed altitude for takeoff and takeoff heading 
fixes for AP_Mission integration

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:11:09 +09:00