Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
58,955 Commits 71 Branches 508 Tags 635 MiB
Commit Graph

58955 Commits

Author SHA1 Message Date
Randy Mackay a4f34811a0 AP_Mount: add Xacti DroneCAN backend 2023-06-27 21:12:20 +10:00
Randy Mackay 2a30bc7ce1 AP_Mount: add devid parameter and setter 2023-06-27 21:12:20 +10:00
Randy Mackay b0de3b57bf DroneCAN: update DSDL to latest 2023-06-27 21:12:20 +10:00
Randy Mackay e213e7e428 AP_RTC: add get_date_and_time_utc 2023-06-27 21:12:20 +10:00
Randy Mackay cf77a564fd AP_Mount: minor comment fix 2023-06-27 21:12:20 +10:00
Randy Mackay c7b64dc448 AP_Mount: Siyi health check avoids race condition 2023-06-27 21:12:20 +10:00
Randy Mackay 5d97a4b3d6 AP_Mount: Siyi loses unused center method 2023-06-27 21:12:20 +10:00
Randy Mackay 98310d861e AP_Airspeed: minor spelling fix 2023-06-27 21:12:20 +10:00
Andrew Tridgell ccd38ddee0 Plane: improved fwd throttle during VTOL landing 
this sets up the vwd integrator more reasonably when we are in
POSITION1 stage of VTOL landing. We need to have enough throttle to
cope with a headwind, but want it lower when we are at or above our
target closing speed so can minimise the amount of pitch up

This also makes the landing_desired_closing_velocity() consistent with
the landing speed used in approach, using average of airspeed min and
cruise speed if TECS_LAND_ARSPD is not set

The target airspeed for TECS during airbraking is now set to
ARSPD_FBW_MIN, on the basis we are trying to slow down to min speed,
and we have VTOL support which should prevent a stall.

To cope with a high headwind where ARSPD_FBW_MIN is below the headwind
we now check for too low achieved closing speed and switch to
POSITION1 which can use vfwd to get to the landing location
 2023-06-27 11:40:55 +10:00
Iampete1 9b54dee7a6 AP_BattMonitor: DroneCAN: allow battery reset if not using CAN SoC 2023-06-27 11:38:15 +10:00
Iampete1 7e94eb39ff AP_BoardConfig: fix conflicting param indexs 2023-06-27 11:27:08 +10:00
Peter Barker b6b73d674f AP_RTC: move implemenation of ap_mktime (NFC) 2023-06-27 11:25:11 +10:00
Peter Barker e659667f03 AP_Common: move implemenation of ap_mktime (NFC) 2023-06-27 11:25:11 +10:00
Peter Barker 4124c6ed3f AP_Common: move AP_RTC::mktime to be ap_mktime 
in preparation for AP_RTC_ENABLED
 2023-06-27 11:25:11 +10:00
Peter Barker 84e4a45dc3 AP_RTC: move AP_RTC::mktime to be ap_mktime 
in preparation for AP_RTC_ENABLED
 2023-06-27 11:25:11 +10:00
Peter Barker c89ec67333 AP_GPS: move AP_RTC::mktime to be ap_mktime 
in preparation for AP_RTC_ENABLED
 2023-06-27 11:25:11 +10:00
Peter Barker ac2fea9766 AP_Filesystem: move AP_RTC::mktime to be ap_mktime 
in preparation for AP_RTC_ENABLED
 2023-06-27 11:25:11 +10:00
Andy Piper 539277ba2f AP_HAL_ChibiOS: Pixhawk6X bdshot version 2023-06-27 11:22:12 +10:00
Henry Wurzburg 3f7f7cd3a1 Plane:remove duplication in setting servos in MANUAL 2023-06-27 11:04:53 +10:00
Michael du Breuil bbcc31ecec AP_RCProtocol: Refactor SUMD to remove legacy cruft 
Of particular note this removes the partial SUMH support. This has been
broken as far back as 2018, as we only called add_input() if we were in
the SUMD or SUMD failsafe cases, which meant SUMH didn't work. This
commits to that path, and removes all the 8 bit CRC, SUMH support.

This also refactors a number of things for readability (condensing white
space, simplifying guards around debug code). Many of the debugs could
probably be removed, but this simplifies it.

This was tested against the RCProtocol example test, and everything
there reports a pass.
 2023-06-27 10:57:06 +10:00
Peter Barker 8b13413f43 AP_Scheduler: add and use AP_SCHEDULER_EXTENDED_TASKINFO_ENABLED 2023-06-27 10:43:39 +10:00
Peter Barker 6e39565ce8 AP_HAL_ChibiOS: add and use AP_SCHEDULER_EXTENDED_TASKINFO_ENABLED 2023-06-27 10:43:39 +10:00
Peter Barker 435214852e AP_Scheduler: add and use AP_Scheduler_config.h 2023-06-27 10:43:39 +10:00
Andrew Tridgell 4219d498ec hwdef: set NRST_MODE on HolybroG4_GPS to fix reboot issue 2023-06-27 10:32:43 +10:00
Andrew Tridgell 54e2e33ee1 HAL_ChibiOS: allow hwdef to specify a NRST_MODE override 
this allows the boot behaviour of a board to be changes to avoid a
reset issue
 2023-06-27 10:32:43 +10:00
Andrew Tridgell a7d51898da AP_Periph: raise CAN priorty of MovingBaseline data 
and raise CAN buffer size for lots of movingbaseline data
 2023-06-27 10:32:43 +10:00
Andrew Tridgell 848e1bfdf8 AP_GPS: ensure uart buffer sizes are OK for RTK 
rover needs higher tx size, base needs higher rx size
 2023-06-27 10:32:43 +10:00
Andrew Tridgell 64869b6e16 AP_GPS: fixed RTK injection with moving baseline 
when 2nd DroneCAN GPS on the bus is the base in moving baseline we
need to be able to inject to it
 2023-06-27 10:32:43 +10:00
Iampete1 6b106c401c Plane: Quadplane: check with motors if motor test is allowed 2023-06-27 10:24:15 +10:00
Iampete1 717f82f104 Copter: check with motors if motor test is allowed 2023-06-27 10:24:15 +10:00
Iampete1 d57ce2ad6f AP_Motors: Add motor test checks method to refuse test 2023-06-27 10:24:15 +10:00
Iampete1 c5733e7634 AP_Motors: Heli: remove _output_test_seq as used in motor test 2023-06-27 10:24:15 +10:00
Andrew Tridgell 753c56f97a ChibiOS: added chMtxForceReleaseS 2023-06-27 10:11:46 +10:00
Andrew Tridgell 7fa0de37c3 GCS_MAVLink: added mutex deadlock test code 2023-06-27 10:11:46 +10:00
Andrew Tridgell 81e0685d33 HAL_ChibiOS: support recovery from a mutex deadlock 
if we have a bug which causes a lock order deadlock locking up the
main thread then try a force release of the mutex to allow flight to
continue without a watchdog
 2023-06-27 10:11:46 +10:00
Peter Barker f7243c0ff5 Tools: add and use AP_SBUSOUTPUT_ENABLED 
.... which will allow periphs to instantiate this if they really feel like it, and for it to be removed on smaller boards on the custom build server (and potentially on lower-specced boards.
 2023-06-27 10:10:41 +10:00
Peter Barker 89dcafcc5c SRV_Channel: add and use AP_SBUSOUTPUT_ENABLED 
.... which will allow periphs to instantiate this if they really feel like it, and for it to be removed on smaller boards on the custom build server (and potentially on lower-specced boards.
 2023-06-27 10:10:41 +10:00
Peter Barker f99f9741fb AP_SBusOut: add and use AP_SBUSOUTPUT_ENABLED 
.... which will allow periphs to instantiate this if they really feel like it, and for it to be removed on smaller boards on the custom build server (and potentially on lower-specced boards.
 2023-06-27 10:10:41 +10:00
Peter Barker 3869c4c0e9 AP_HAL_ChibiOS: add and use AP_SBUSOUTPUT_ENABLED 
.... which will allow periphs to instantiate this if they really feel like it, and for it to be removed on smaller boards on the custom build server (and potentially on lower-specced boards.
 2023-06-27 10:10:41 +10:00
Peter Barker 5daa38ffba AP_Vehicle: initialise generator before init_ardupilot 
each of the vehicles does a load-defaults-from-files.  Use that fact to ensure any generator backend parameter's defaults are loaded.
 2023-06-27 09:54:29 +10:00
Peter Barker 8665ccbe8f Tools: add bootloaders for FlyingMoonF427 2023-06-27 09:38:48 +10:00
Peter Barker 20e10dc401 hwdef: update FlyingMoonF427 
vendor update
 2023-06-27 09:38:48 +10:00
Andy Piper a7ad2dc940 AP_HAL_ChibiOS: use unsigned math as appropriate 2023-06-27 09:28:33 +10:00
Andy Piper 76b7566cd1 AP_HAL_ChibiOS: implement extended dshot telemetry (EDT) 2023-06-27 09:28:33 +10:00
Andy Piper 79bd29e9a7 SRV_Channel: add documentation for ESCs supporting extended dshot telemetry (EDT) 2023-06-27 09:28:33 +10:00
Andy Piper 62fc1b91c4 AP_HAL: add dshot commands and ESC types for extended dshot telemetry (EDT) 2023-06-27 09:28:33 +10:00
Iampete1 262b11f0c1 AP_Compass: stop auto replacing missing CAN by default, add option to re-enable 2023-06-27 09:24:41 +10:00
Iampete1 97541f82d0 AP_Motors: Heli RSC: remove incorrect set range call 2023-06-27 09:04:18 +10:00
Tom Pittenger 4eeb1f18d3 Plane: fixup is_landing and is_taking_off members 2023-06-26 06:54:56 -07:00
Zach Flathers b35b94f553 Plane: update based on PR feedback 2023-06-26 06:54:56 -07:00