Commit Graph

57142 Commits

Author SHA1 Message Date
James O'Shannessy d8721a72a2 AP_BattMonitor: Fixes the setting of a default parameter for battery instance #2 set in hwdef 2023-06-08 09:29:59 +10:00
Randy Mackay ca7473d960 Copter: RTL accepts do-change-speed commands 2023-06-08 09:29:59 +10:00
Randy Mackay 110901e95d AC_WPNav: wpnav speed param check fixed 2023-06-08 09:29:59 +10:00
Andrew Tridgell 5eb975d01e Plane: release notes for 4.4.0-beta2 2023-06-08 09:29:59 +10:00
Andrew Tridgell 169d180961 HAL_ChibiOS: fixed USB pass-thru for 2nd USB endpoint
we need to align the endpoint ID in the structure
2023-06-08 09:29:59 +10:00
Andrew Tridgell 6f5d3a0dfd AP_AHRS: don't reject airspeed using EKF if dead-reckoning
when dead-reckoning the EKF wind estimate can diverge from reality,
leading to us rejecting a valid airspeed sensor. We are best off
trusting airspeed if we are dead-reckoning
2023-06-08 09:29:59 +10:00
Andrew Tridgell 5f6a1f7f71 AP_BoardConfig: fixed documentation of safety options
on and off were reversed
2023-06-08 09:29:59 +10:00
Iampete1 5d1bb3b1ca Filter: SlewLimiter: always caculate slew limit 2023-06-08 09:29:59 +10:00
Andrew Tridgell 250a4ffcef AP_BattMonitor: allow max amps to be configured on INA2XX
this allows for higer current ranges with lower resolution
2023-06-08 09:29:59 +10:00
Andrew Tridgell 67cfbcfc41 hwdef: use zero address for INA2XX to allow for different sensors 2023-06-08 09:29:59 +10:00
Andrew Tridgell b8b9f82084 AP_BattMonitor: auto-probe INA2XX address if address is zero
this makes life easier for users who don't know which device they have
2023-06-08 09:29:59 +10:00
Andrew Tridgell f54d851364 AP_BattMonitor: support INA228 and INA238 battery monitor
I2C monitors with similar functionality to INA226
2023-06-08 09:29:59 +10:00
Peter Barker 10ce2f7f62 autotest: integrate features.json generation to build_binaries.py
we have to run the extract_features.py that corresponds to the branch being built.  We may say a feature is presnet when it isn't or vice-versa if we don't.
2023-06-08 09:29:59 +10:00
Andy Piper ebd66e88e0 AC_AutoTune: load test gains for correct axis when testing yaw D 2023-06-08 09:29:59 +10:00
Paul Riseborough d98a60c2e1 AP_NavEKF3: Increase delta velocity bias state process noise
Required due to state variance collapse on ground with some systems using RTK GPS.
2023-06-08 09:29:59 +10:00
Paul Riseborough da22519de8 AP_NavEKF3: Strengthen recovery from bad delta velocity bias learning 2023-06-08 09:29:59 +10:00
Paul Riseborough 17003ff0f5 AP_NavEKF3: Increase default value of EK3_ABIAS_P_NSE
This is required because some hardware setups with RTK GPS have experienced a collapse of the delta velocity state variances.
2023-06-08 09:29:59 +10:00
Paul Riseborough 9c93cb8d46 AP_NavEKF3: Retune and fix delta velocity bias state variance protection 2023-06-08 09:29:59 +10:00
Andy Piper 383297f6be AP_NavEKF: ensure gyro biases are numbers
avoid errors during compass mot
2023-06-08 09:29:59 +10:00
Paul Riseborough 444f90352f AP_NavEKF3: Lock in wind state estimates when using srag to dead reckon 2023-06-08 09:29:59 +10:00
Andrew Tridgell 41e922c60e AP_ICEngine: fixed a bug engine control when running
if you have a mission item for engine control with delayed start at
height and the engine is already running them it would put the ICE
subsystem into a state where it would no longer start the engine

It was actually 2 bugs:

 - an engine control to do a height delayed start should be ignored if
   the engine is already running. This prevents an engine control to
   start the engine from stopping the engine

 - a start_chan high should always try to start the engine
   immediately, even if in the wait state
2023-06-08 09:29:59 +10:00
Andrew Tridgell cf81c1448e waf: added -g option to configure
this adds debug symbolds to the build without enabling other debug
code. This is needed for analysing watchdog crash dumps
2023-06-08 09:29:59 +10:00
Andrew Tridgell e1a982541b Tools: update IO firmware 2023-06-08 09:29:59 +10:00
Andrew Tridgell 87c767df5c AP_RCProtocol: return true on initial protocol detection
we need to tell the IO firmware that a byte was consumed when we first
detect a protocol as otherwise the next bad byte on DSM will lock us
on the DSM port
2023-06-08 09:29:59 +10:00
Andrew Tridgell 3b50123f18 AP_IOMCU: fixed issue with not regaining RC input
this fixes an issue where when you lose R/C input on IOMCU that you
may not regain it when R/C comes back.

The issue stems from us still processing the DSM uart when we are
using the SD3 "SBUS" uart for RC input, and still doing the switch of
the SD3 config every 2 seconds.

When we are not searching for a new protocol we should not be changing
UART config
2023-06-08 09:29:59 +10:00
Andrew Tridgell 784bfb53f2 AP_NavEKF3: handle core setup failure
ensure num_cores is left as zero so that calls such as Log_Write don't
de-reference nullptr
2023-06-08 09:29:59 +10:00
Andrew Tridgell 259e51e0e8 AP_NavEKF2: handle core setup failure
ensure num_cores is left as zero so that calls such as Log_Write don't
de-reference nullptr
2023-06-08 09:29:59 +10:00
Andrew Tridgell 2bbffdd6c6 AP_Param: added set() to AP_Enum 2023-06-08 09:29:59 +10:00
Peter Barker 38279fc5dd AP_Logger: do not rotate logs when disarming if we are replay-logging 2023-06-08 09:29:59 +10:00
Andrew Tridgell e3537cb01d AP_Logger: added LOG_DARM_RATEMAX
this sets the logging rate max when disarmed. In combination with
LOG_DISARMED=3 it gives a very nice setup to get always on logging
with very little addition to the log sizes. It is particularly useful
in combination with LOG_REPLAY=1
2023-06-08 09:29:59 +10:00
Andrew Tridgell 1c78e4f7f9 AP_Logger: added LOG_DISARMED=3
when LOG_DISARMED is set to 3 then we log while disarmed but if we
reboot without ever arming the log is discarded. This allows for using
LOG_DISARMED without filling the microSD.
2023-06-08 09:29:59 +10:00
Andrew Tridgell f69188d43a AP_Logger: use AP_Enum for log_disarmed 2023-06-08 09:29:59 +10:00
Henry Wurzburg c64b9972a5 Tools: Add SpeedyBeeF405WING 2023-06-08 09:29:59 +10:00
Henry Wurzburg b23b6cd4bf AP_HAL_ChibiOS: Add SpeedyBeeF405WING 2023-06-08 09:29:59 +10:00
Andy Piper 69c0b1c567 AP_HAL_ChibiOS: correct locking on LED thread 2023-05-28 07:53:16 +10:00
Andy Piper e8d1afd108 AP_HAL_ChibiOS: move LED processing to a separate thread
LED processing on a separate thread allows much longer LED lengths to be handled without
compromising dshot timing or timeouts. The thread is also run at a lower priority to
reflect its lack of flight criticality
2023-05-28 07:53:16 +10:00
Andy Piper f97cd5c5ab AP_HAL: add helper functions for LEDs
add PRIORITY_LED for led output thread
2023-05-28 07:53:16 +10:00
Andy Piper c042577827 AP_HAL_ChibiOS: reduce IMU SPI low speed to 1Mhz to avoid chip initialization issues 2023-05-25 18:12:00 +01:00
Andy Piper d1600d3bf7 AP_HAL_ChibiOS: FoxeerH743 GA release 2023-05-24 17:21:41 +10:00
Andy Piper 9afcc8cf24 AP_HAL_ChibiOS: update MambaF405v2 for ICM42688, bdshot and DMA on UART1 2023-05-24 17:20:05 +10:00
Andy Piper 31c3b3e8ef bootloaders: remove FlywooF745v2 bootloaders 2023-05-24 17:20:05 +10:00
Andy Piper a667e3728c AP_HAL_ChibiOS: add BMI270 and ICM42688 to FlywooF745 2023-05-24 17:20:05 +10:00
Andy Piper d5535cc0cf AP_HAL_ChibiOS: remove erroneous FlywooF745v2 2023-05-24 17:20:05 +10:00
Andy Piper 74c790cfc2 bootloaders: bootloaders for Flywoo F745v2 2023-05-24 17:20:05 +10:00
Andy Piper 3ec036c4ea AP_HAL_ChibiOS: hwdef for FlywooF745v2
Add SPL06 baro to FlywooF745v1
2023-05-24 17:20:05 +10:00
Andrew Tridgell 867ff238b8 Plane: fixed release notes history
was missing 4.3.5
2023-04-22 12:59:58 +10:00
Randy Mackay d0edf79b8f Copter: 4.4.0-beta1 release notes update 2023-04-21 09:48:59 +10:00
Randy Mackay 56e907b3ac Rover: 4.4.0-beta1 release notes update 2023-04-21 09:48:59 +10:00
Andrew Tridgell 7fd85dd860 Plane: prepare for 4.4.0beta1 2023-04-21 09:48:59 +10:00
Andrew Tridgell 06b39878f7 Plane: release notes for 4.4.0beta1 2023-04-21 09:48:59 +10:00