Commit Graph

130 Commits

Author SHA1 Message Date
Lucas De Marchi 831d8acca5 Remove use of PROGMEM
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
2015-10-30 14:35:16 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
2015-10-30 14:35:04 +09:00
Andrew Tridgell 5d1d54a8cb Plane: added CHUTE_CHAN parameter for manual release 2015-10-27 16:06:34 +11:00
Andrew Tridgell 9affddcaa3 Plane: initial support for AP_Parachute library 2015-10-27 16:06:34 +11:00
Caio Marcelo de Oliveira Filho 49a42dc985 SITL: use a SITL namespace 2015-10-22 11:04:42 -02:00
Andrew Tridgell 458e967d06 Plane: added RPM logging
useful for seeing if a petrol motor is still running
2015-09-24 20:58:18 +10:00
Andrew Tridgell 91f990af06 Plane: added EKF2 to parameters as EK2_* 2015-09-23 11:56:37 +10:00
Randy Mackay 6da53ae3b2 Plane: replace SKIP_GYRO_CAL with INS_GYR_CAL
Also calibrate gyros with accel cal and set trim
2015-09-21 17:06:43 +09:00
Grant Morphett 9a76f0ecf0 Plane: Fixing FS_SHORT_ACTN parameter doco
This is to resolve wiki issue 146
https://github.com/diydrones/ardupilot-wiki-issue-tracker/issues/146
2015-09-16 09:35:38 +09:00
Grant Morphett 6b22a59eff Plane: Fixing up the ARMING_ parameters autogen doco 2015-09-15 14:11:15 +09:00
Andrew Tridgell 953efa9b6c Plane: fixed parameter docs for LAND_ABORT_THR
it should be a values list
2015-09-09 09:08:59 +10:00
Tom Pittenger 25da4ec0ea Plane: added flight stage FLIGHT_LAND_ABORT and abort mechanism
- enabled via new param LAND_ABORT_THR default is 0 (disabled)
- Triggered via 95% throttle during landing, a landing abort will take place.
- This copies all takeoff params for right now, we can make this better later if needed
- added mission item command to NAV_LAND which is the abort takeoff altitude. If 0 then use last takeoff if available, else use 30m
- hold heading, just like takeoff, until altitude is reached
- pitch is constrained to takeoff pitch, or else 10deg if not available
- After abort altitude is reached, the normal landing restart happens (DO_LAND_START or decrement mission)
- restart landing by jumping to DO_LAND_START or decrement mission on mode change
2015-09-09 09:04:24 +10:00
Grant Morphett e734e9745d Plane: TKOFF_TDRAG_SPD1 is needed if holding nose wheel down.
Just clearing up the documentation as per this wiki issue
https://github.com/diydrones/ardupilot-wiki-issue-tracker/issues/138
2015-09-08 17:31:09 +10:00
Grant Morphett 3cb0c1bba8 Plane: Move the plane centric arming code into arming_checks.cpp
Needed to move the plane centric arming code out of the AP_Arming
library and into the plane vehcile code.
2015-09-07 11:54:21 +10:00
Stewart Loving-Gibbard 722dd29370 Plane: Moving to RSSI library for reading various kinds of RSSI, with the possibility of adding more.
* Retains ability to read from Analog Pin
* Adds ability to read RSSI from PWM channel value as is done in OpenLRSng, EazyUHF, and various other LRS.
* Handles any type of RSSI that provides RSSI values inverted - i.e. when the low value is the best signal and the high value is the worst signal.
* Has different key names from all existing RSSI parameters to provide for a clean break and easier distinguishing.
* Existing parameters are marked as obsolete
2015-08-29 08:05:59 +10:00
Randy Mackay e4c62811ea Plane: fix link to BATT parameter descriptions 2015-08-26 11:17:55 +09:00
Tom Pittenger da8f4f9e95 Plane: reworked is_flying
add crash detection, allow disengage via param CRASH_DETECT
improved is_flying behavior
take off, landing and hard-landing improvements
add stillness check to is_flying and log it
minimum airspeed is determined ARSPD_FBW_MIN*0.75
2015-08-23 10:34:18 +10:00
Stewart Loving-Gibbard eb2ca91f1c Plane: Fixing unambiguous spelling errors in Parameters.cpp file.
These are user-visible in Mission Planner and the like.
2015-08-18 17:16:19 +10:00
Andrew Tridgell 6186b7a453 Plane: disable TRIM_RC_AT_START by default 2015-08-15 19:13:30 +10:00
Andrew Tridgell 6c07795b63 Plane: added HIL_SUPPORT define
disable HIL support on APM2 to save flash space
2015-07-30 11:04:31 +10:00
Lucas De Marchi e97034f8e9 ArduPlane: use ARRAY_SIZE macro 2015-07-07 07:56:30 +10:00
Andre Kjellstrup 3e84132f6b GCS_Failsafe: new parameter option 2015-06-18 07:52:42 +10:00
Michael Oborne 7dcd24137e Plane: add bitmask documentation 2015-06-05 10:21:21 +09:00
Andrew Tridgell 9adc879253 Plane: changes for new AHRS API 2015-06-01 16:16:49 +10:00
Andrew Tridgell 09476bf9d3 Plane: added GCS_PID_MASK for realtime pid tuning 2015-05-27 14:28:46 +10:00
Andrew Tridgell 8974c879fe Plane: fixed paths for GCS_MAVLink parameter file 2015-05-21 11:42:45 +10:00
Andrew Tridgell 554869033f Plane: disabled rangefinder on APM2
this saves 5k of flash space, enough for support to be kept for
another release
2015-05-21 07:48:53 +10:00
Andrew Tridgell b92c2409e4 Plane: added local millis() and micros() to reduce code size a bit 2015-05-21 07:48:53 +10:00
Andrew Tridgell 150af130ee Plane: get closer to making var_info appear in text segment 2015-05-21 07:48:52 +10:00
Andrew Tridgell 18c37935c9 Plane: convert from .pde to .cpp files 2015-05-21 07:48:52 +10:00