Andrew Tridgell
491e82159c
HAL_ChibiOS: add HAL_WITH_SPI_xx defines for SPI devices
...
this allows us to avoid building drivers for SPI devices we don't
have, such as OSD
2020-09-02 05:56:46 +10:00
vierfuffzig
56e44c46ca
AP_HAL_ChibiOS: disable IMU fast sampling on F35 / WingFC10
...
fast sampling introduces random IMU glitches, bisect search identifies 9c2caf5b12
disabling fast sampling fixes IMU back to expected behaviour. see:
https://github.com/ArduPilot/ardupilot/issues/15090
https://discuss.ardupilot.org/t/shaking-horizon-and-jittering-servos/60420
for reference
2020-08-31 19:50:09 +10:00
Andrew Tridgell
36442dc9b0
HAL_ChibiOS: added Matek CAN GPS
...
supports GPS, baro, mag and airspeed
2020-08-25 09:59:15 +10:00
Andrew Tridgell
4c4c3d467b
HAL_ChibiOS: added f103-Airspeed sensor
...
for Matek CAN airspeed sensor
2020-08-25 09:59:15 +10:00
Siddharth Purohit
8dcb973dad
HAL_ChibiOS: fix SWD config in f3 boards
2020-08-20 19:08:14 +10:00
Siddharth Purohit
cdf8e369f1
AP_HAL_ChibiOS: create UAVCAN agnostic CANIface driver
...
HAL_ChibiOS
2020-08-19 17:31:09 +10:00
Andy Piper
baf92a17f9
AP_HAL_ChibiOS: disable AP_Mount on "mini" boards
2020-08-04 09:18:14 +10:00
Andrew Tridgell
d283dd7d00
HAL_ChibiOS: define polarity of 3.3/5v selection for PWM
2020-07-21 08:47:27 +10:00
Andrew Tridgell
99ac8e2fbe
HAL_ChibiOS: enable BRD_PWM_VOLT_SEL parameter for mRoPixracerPro
2020-07-21 08:47:27 +10:00
Henry Wurzburg
d78c5371db
AP_HAL_ChibiOS: remove fmuv4 and update Pixracer
2020-07-13 15:24:54 +10:00
Andrew Tridgell
9f1e641637
HAL_ChibiOS: added new STM32Cube configs
2020-07-10 13:33:51 +10:00
Andrew Tridgell
84bd59a7bb
HAL_ChibiOS: support H7 with no crystal
2020-07-10 13:33:51 +10:00
Andrew Tridgell
cfbfb27004
HAL_ChibiOS: support no-crystal F3 setups
2020-07-10 13:33:51 +10:00
Peter Barker
cadb1012df
AP_HAL_ChibiOS: reenable full features on KakuteF7Mini
2020-07-02 18:38:46 +10:00
Andrew Tridgell
ce8591ddbc
HAL_ChibiOS: re-enable full features on KakuteF7 and OMNIBUSF7V2
...
we now have enough space with recent changes for these boards
2020-07-02 18:38:46 +10:00
Andy Piper
c707303336
AP_HAL_ChibiOS: hold buzzer ping low in bootloader for omnibusf4pro
2020-06-30 17:58:35 +10:00
Andy Piper
48e0da8444
AP_HAL_ChibiOS: pull buzzer pin low in Kakute F7 bootloader to prevent startup scream
2020-06-30 17:58:35 +10:00
Andrew Tridgell
20b2396646
HAL_ChibiOS: fixed bug in undef of pins
...
revert pin to initial state on undef
2020-06-30 14:28:30 +10:00
Randy Mackay
f9a866d09a
AP_HAL_ChibiOS: luminousbee4 serial5 to mavlink2
2020-06-30 09:42:49 +10:00
Randy Mackay
3e0bb4110a
AP_HAL_ChibiOS: fmuv4 serial5 to mavlink2
2020-06-30 09:42:49 +10:00
Randy Mackay
ced448b706
AP_HAL_ChibiOS: DrotekP3Pro serial5 to mavlink2
2020-06-30 09:42:49 +10:00
MATEKSYS
903b44da7d
HAL_ChibiOS: Add DPS310 for MatekF405-WING,F765-WING and H743
2020-06-22 19:35:01 +10:00
Andrew Tridgell
6fa623d074
HAL_ChibiOS: added Holybro Pix32v5
2020-06-12 21:23:16 +10:00
MATEKSYS
14e01e21b7
HAL_ChibiOS: MatekH743: move baro to I2C2 bus
2020-06-11 17:31:59 +10:00
Andrew Tridgell
c1403a2e2b
HAL_ChibiOS: fixed default CubeOrange pin for 2nd current sensor
2020-06-10 17:32:11 +10:00
Andrew Tridgell
6a1f43d5df
HAL_ChibiOS: fixed build with our old compiler
...
gcc 4.9 doesn't like static_assert() in C code
2020-06-07 14:11:48 +10:00
duccan
cdcdd5ce27
AP_HAL_ChibiOS: Added support for Bitcraze Crazyflie 2.1
...
Rework after review:
- Kept old IMU and barometer definition of crazyflie 2.0 in hwdef
- Added comment regarding soft-reset command
- Added defaults.parm for crazyflie
2020-06-07 07:49:37 +10:00
duccan
0d96c7f7a5
AP_HAL_ChibiOS: Added support for Bitcraze Crazyflie 2.1
2020-06-07 07:49:37 +10:00
James Jacobsson
8a87322d93
AP_HAL_Chibios: Adjust MatekF765-Wing voltage and current scales
...
The new values matches the ones from here:
http://www.mateksys.com/?portfolio=f765-wing#tab-id-5
Also verified to be a lot more accurate in real life.
2020-06-04 10:06:22 +10:00
Phillip Kocmoud
0d5a0f392c
hwdef.dat update x2.1-777
2020-06-04 09:51:27 +10:00
Andrew Tridgell
571fbf8f71
HAL_ChibiOS: update power VALID pins
2020-06-04 09:51:27 +10:00
CUAVcaijie
220e6999c7
HAL_ChibiOS:Adapt to CUAV Nora V1.2 hardware
2020-05-28 19:13:49 +10:00
pkocmoud
7809dc849c
HAL_ChibiOS: Added support for mRo Pixracer Pro flight controller
2020-05-27 21:22:56 +10:00
Henry Wurzburg
9c72525bbf
AP_HAL_ChibiOS: Add unused LED output as GPIO in OmnibusF4Pro def
2020-05-26 10:51:32 +10:00
Henry Wurzburg
12d5602926
AP_HAL_ChibiOS: Add ability to use UART3 and UART4 in bd alt config 4
2020-05-11 14:18:35 +10:00
Andrew Tridgell
259cb0aafd
HAL_ChibiOS: removed EKF2 define, not needed any more
2020-05-10 15:09:54 +10:00
Andrew Tridgell
61d036acf3
HAL_ChibiOS: added build time check for right system clock
...
this helps prevent cases where we underclock a chip due to mistake in
headers or hwdef.dat
2020-05-10 15:09:28 +10:00
Andrew Tridgell
69676cd614
HAL_ChibiOS: support 24MHz f3 MCUs
2020-05-10 15:09:28 +10:00
Henry Wurzburg
3f735e7e54
HAL_ChibiOS: Make full UART4 available as bd config option
2020-05-10 08:00:57 +10:00
Henry Wurzburg
225a305cb9
AP_HAL_ChibiOS:Remove alt config since its not useful (no TX available)
2020-05-10 08:00:21 +10:00
Peter Barker
967f8bf726
AP_HAL_ChibiOS: correct description of where stdout goes
2020-05-05 07:57:57 +10:00
pkocmoud
defb7dc43f
hwdef: add mRo M10070 Location One CAN GPS
2020-04-30 11:31:43 +10:00
Andrew Tridgell
3ec2ef787d
HAL_ChibiOS: fixed build warning
2020-04-29 12:20:19 +10:00
Andrew Tridgell
ce68e0fbb5
HAL_ChibiOS: fixed bootloader build
2020-04-29 07:36:55 +10:00
Andrew Tridgell
18e88e0ea3
HAL_ChibiOS: implement stack overflow hook
...
this needs C bindings to allow call from low level RTOS thread
switching code
2020-04-29 07:36:55 +10:00
Andrew Tridgell
a5965d5a9e
HAL_Chibios: removed unnecessary debug defines
2020-04-29 07:36:55 +10:00
Andrew Tridgell
2c26807736
HAL_ChibiOS: embed hwdef.dat in ROMFS for all boards
2020-04-29 07:36:55 +10:00
Andrew Tridgell
6bacf021c8
HAL_ChibiOS: disable thread_info in AP_Periph and bootloader
2020-04-29 07:36:55 +10:00
Andrew Tridgell
f0c9f4003e
HAL_ChibiOS: implement thread_info()
2020-04-29 07:36:55 +10:00
Andrew Tridgell
ea71b72c87
HAL_ChibiOS: fixed issue with I2C4 on H743
...
when both I2C4 and SPI4 are active on a H743 I found that some BDMA
completion interrupts were lost, which resulted in SPI transfer
timeouts. Close inspection of the ChibiOS BDMA, I2Cv3 and SPIv3
drivers did not reveal any issues, but I found that the issue only
happened when the first 4 BDMA streams were used. This change splits
the 4 streams across the first and 2nd half of the BDMA controller,
and that fixes the problem.
This works as there are only 2 peripherals (I2C4 and SPI6) that want
to use BDMA with our current setup. If we ever wish to enable ADC3
(which also uses BDMA) we will need to revisit this issue
2020-04-28 17:42:15 +10:00