15 Commits

Author	SHA1	Message	Date
Peter Barker	956ac243e1	AP_HAL_ChibiOS: adjust hwdef files for define renames	2024-07-11 09:34:00 +10:00
Andrew Tridgell	ed58758ce6	hwdef: don't use DEFAULTGPIO in bootloaders ... setting up a DEFAULTGPIO pulldown in bootloaders is a bad idea as it overrides any hardware pullups that have been put in place as part of a "hold in bootloader" mechanism. See discussion in #27360 for ELRS note that this only impacts one board that I can see, the BlitzF745AIO, due to the MCU vs DEFAULTGPIO interaction	2024-06-25 12:05:40 +10:00
Jacob Dahl	e5ea8f14f4	hwdef: ARKV6X: enable debug console	2024-05-02 15:16:33 -07:00
Jacob Dahl	9f5e837646	hwdef: ARKV6X: UART6 RC SBUS input	2024-05-02 15:16:33 -07:00
alexklimaj	e9f51a96cb	hwdef: ARKV6X add USART6 to serial list	2024-01-01 13:17:06 +11:00
alexklimaj	e1b991a84a	hwdef: ARKV6X ADIS16507 example	2023-10-05 08:21:50 +11:00
Peter Barker	b8978ad73a	hwdef: explicitly state no-bootloader-embedding on some boards	2023-08-17 08:37:31 +10:00
alexklimaj	738a4c638a	hwdef: arkv6x default to no IO MCU	2023-08-14 12:06:25 +10:00
Tom Pittenger	8bddd4168b	AP_HAL_ChibiOS: update hwdefs for eth	2023-08-06 09:20:08 +10:00
Tom Pittenger	291226eb5d	AP_HAL_ChibiOS: hwdef add support for Networking	2023-08-06 09:20:08 +10:00
Andrew Tridgell	5908508811	hwdef: default most boards to MAVLink2 for 2nd USB endpoint ... only CubeOrange and CubeBlack left as SLCAN	2023-07-31 19:03:13 +10:00
Peter Barker	338a4d6b38	hwdef: remove HAL_BOARD_LOG_DIRECTORY and HAL_BOARD_TERRAIN_DIRECTORY defaults ... these are now defaulted in chibios_hwdef.py	2023-07-19 17:25:18 +09:00
Andrew Tridgell	b019978e22	hwdef: use zero address for INA2XX to allow for different sensors	2023-05-10 18:15:52 +10:00
Andrew Tridgell	e4ce423c46	hwdef: DMA is off on I2C on F7 and H7 by default ... no need to have it in hwdef.dat	2023-04-25 14:19:09 +10:00
alexklimaj	e5cd25ff98	hwdef: ARKV6X	2022-10-24 07:27:11 +11:00