Peter Barker
85f339caae
Plane: remove annoying ice_update shim
2018-07-04 21:08:47 +01:00
Peter Barker
e404562544
Plane: remove vexing button_update shim
2018-07-04 21:08:47 +01:00
Peter Barker
4502fd21c3
Plane: use compass singleton for logging
2018-07-04 20:11:27 +01:00
Michael du Breuil
1c276e6af7
Plane: Remove unneeded wrapper functions
...
Also removes unneeded battery failsafe flag clearing
2018-06-27 11:39:35 +10:00
Peter Barker
9824832523
Plane: use AP_RTC
...
Plane: AP_GPS now sets the system time directly
2018-06-15 08:01:22 +10:00
Peter Barker
bc9df01d21
Plane: remove sending of statustext for home location
2018-05-29 14:38:45 +10:00
Peter Barker
22306c370b
Plane: factor out a Plane::set_home
2018-05-29 14:38:45 +10:00
Tom Pittenger
4dca1c48f2
Plane: update vehicle max_speed to ADSB library
2018-05-23 14:02:45 -07:00
Michael du Breuil
b479f3760a
Plane: Remove some unneeded logging indirection
...
Saves 32 bytes on make px4-v2
2018-05-16 20:34:00 +10:00
Peter Barker
eb026e0a5f
Plane: correct compilation when logging is disabled
2018-05-10 17:55:13 +09:00
Peter Barker
68497f27fa
Plane: move try_send_message handling of RC_CHANNELS up
2018-05-08 12:33:32 +01:00
Peter Barker
5ef417a669
Plane: GPS now logs its own data
2018-04-18 13:50:55 +09:00
Peter Barker
2b54113334
Plane: Baro does its own dataflash logging
2018-04-12 19:12:12 +01:00
Michael du Breuil
3e4288d604
Plane: Use RC_Channels instead of hal.rcin
2018-04-11 21:47:07 +01:00
Michael du Breuil
7405bb7b85
Plane: Support new battery failsafes
2018-03-27 22:12:21 +01:00
Peter Barker
7fd859da65
Plane: move home state into AP_AHRS
2018-03-19 10:32:37 +09:00
Peter Barker
7c86c4fe61
Plane: use ins singleton
2018-03-16 00:37:35 -07:00
night-ghost
98b8a61ca8
Plane: allow AP_Stats to be optional
2018-03-02 07:23:35 +11:00
David Ingraham
a6aeebad4b
Plane: Add support for AP_Gripper
2018-03-01 14:14:43 +11:00
Andrew Tridgell
e6cebdecd1
Plane: use scheduler.get_last_loop_time_s()
2018-02-13 17:15:05 +11:00
Peter Barker
3859e5dfb1
Plane: eliminate update_perf_logging scheduler table shim
2018-02-13 17:15:05 +11:00
Andrew Tridgell
36660b2124
Plane: use filtered loop time
2018-02-13 17:15:05 +11:00
Peter Barker
4586b892f2
Plane: pass log-performance-bit at init time rather than update time
2018-02-13 17:15:05 +11:00
Peter Barker
8cae776448
Plane: move logging of PM and PERF messages to AP_Scheduler
2018-02-13 17:15:05 +11:00
Peter Barker
02540fdbf9
Plane: use AP_Scheduler's loop() function
2018-02-13 17:15:05 +11:00
Peter Barker
73092c3c30
Plane: use scheduler ticks in place of mainloop_count
2018-02-13 17:15:05 +11:00
Peter Barker
519e6c31d2
Plane: use AP::PerfInfo library
2018-02-13 17:15:05 +11:00
Andrew Tridgell
2fb6113098
Plane: use AP:PerfInfo class
2018-02-10 10:50:22 +11:00
Andrew Tridgell
d1e11a5bde
Plane: fixed build (remove learn_offsets call)
2018-02-08 17:36:33 +11:00
Tom Pittenger
512b327cd4
Plane: failsafe events to use enums instead of magical numbers : Non-functional change
2017-12-07 00:19:32 -08:00
Andrew Tridgell
2a81792b41
Plane: don't disable compass on one bad reading
...
the compass can go back for a short time and recover
found by Michael
2017-11-28 09:02:24 +11:00
Michael du Breuil
9720fcb8cc
Plane: Only update home when not armed, rather then not soft armed
...
Plane supports being armed, in takeoff logic and not spinning the motor
until the moment the safety button has been pressed. Unfortunately
because the safety button is required to be pressed for soft arming this
results in the plane updating home position while the user moves the
vehicle or is holding it to throw the vehicle which will can result in
several meters of altitude error from where the user expected home to
be.
Because the normal approach to plane is to have activated the safety
button before arming the aircraft this is not expected to be a behaviour
change for most users, but an improvement for people who use the button
to initiate a takeoff.
2017-11-21 11:45:15 +11:00
Michael du Breuil
767018b1d4
Plane: Support unlocking cruise heading with rudder
2017-11-09 09:39:44 +11:00
Tom Pittenger
8029a7f10e
Plane: add Tom Pittenger to developers list
...
Plane: add Tom Pittenger to developers list. He was added to main Plane.h as "Lead Developer" here *https://github.com/ArduPilot/ardupilot/blob/master/ArduPlane/Plane.h#L2 ) but never to the main ArduPilot.c file.
2017-11-06 13:46:32 +01:00
Andrew Tridgell
9c8cd6c1cc
Plane: added Q_TRANS_DECEL
...
this gives a deceleration rate for QRTL transition from RTL, and also
for transitions to QLOITER
2017-11-05 20:44:42 +11:00
Michael du Breuil
d52f5155f0
Plane: Rename rc failsafe state members
2017-11-02 16:46:08 -07:00
Andrew Tridgell
1085069851
Plane: use WP_LOITER_RAD if RTL_RADIUS is 0 for QRTL
2017-10-30 16:52:19 +11:00
Andrew Tridgell
aa430a6e2c
Plane: use RTL_RADIUS for QRTL threshold
...
when Q_RTL_MODE=1 in a quadplane use RTL_RADIUS as the distance to
switch to QRTL mode. We navigate to the destination using direct
waypoint navigation instead of using a loiter circle.
2017-10-30 16:30:38 +11:00
Peter Barker
d49be616da
Plane: call ins's periodic function
2017-10-27 16:33:45 +11:00
Tom Pittenger
8adacfeea3
Plane: always log MODE and include reason when logging is enabled
2017-10-25 21:18:29 +11:00
Lucas De Marchi
44ffb67837
ArduPlane: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Peter Barker
1a665280e9
Plane: remove CLI
2017-08-14 10:23:50 +09:00
Peter Barker
2fb46a67dd
Plane: camera is responsible for taking distance-based-images and logging
2017-07-28 14:27:53 +01:00
Michael du Breuil
f87a69dcf2
Plane: Throttle based landing aborts should ask the landing library
...
Throttle based aborts should be requesting a go around from AP_Landing.
This was missed in the initial port.
2017-07-17 08:43:50 -07:00
Peter Barker
c058fba5ac
Plane: eliminate GCS_MAVLINK::send_statustext_all
2017-07-11 23:53:53 +01:00
Peter Barker
3b0a7703c4
Plane: eliminate gcs_send_message wrapper
2017-07-11 23:45:16 +01:00
Peter Barker
5a8f01c19c
Plane: use send_text method on the GCS singleton
2017-07-09 17:17:29 -04:00
Peter Barker
949e07c7e3
Plane: use DataFlash should_log to determine raw IMU logging
2017-06-29 15:26:27 +01:00
Mark Whitehorn
6607dafc66
ArduPlane: change is_tailsitter() to tailsitter_active()
2017-06-07 20:21:49 +10:00
Mark Whitehorn
53b82d1d4d
ArduPlane: add comments on tailsitter pitch limits
2017-06-07 20:21:49 +10:00
