This reverts support for RCInput via PWM. This is causing trouble in
some RPI-based boards, receiving a SIGSEGV. Let's revert it for now and
retry this later.
This reverts commit 5629f38b2c.
This reverts commit 51fd0b3d55.
This reverts commit 79d56073f7.
../../libraries/AP_HAL_Linux/RCInput_RPI.cpp: In member function ‘virtual void Linux::RCInput_RPI::_timer_tick()’:
../../libraries/AP_HAL_Linux/RCInput_RPI.cpp:489:127: warning: ‘x’ may be used uninitialized in this function [-Wmaybe-uninitialized]
counter = circle_buffer->bytes_available(curr_pointer, circle_buffer->get_offset(circle_buffer->_virt_pages, (uintptr_t)x));
^
This shrink must be used when the output camera sizes doesn't fit
the expected output.
We don't need to crop it even when the camera sizes aren't squared since
the shrink_8bpp() function shrinks a selected area.
This function shrinks a selected area on a 8bpp image.
The focus in this function was the performance, so this may not be the
clearer or the most understandable way to write it. The performance
was measured using GoogleBenchmark[1].
[1] - https://github.com/google/benchmark.git
Support for perf api using lttng.
Some additional build tricks needed for bebop because lttng uses dl_open
which is not compatible with a static link on a different libc as used
on the bebop
We are not doing any dma here, it's just an SPI transaction. Name them
only rx/tx (although io_packet_tx/io_packet_rx could be another option).
This also zero-initialize the struct to keep valgrind happy about not
calling ioctl() with uninitialized variables.
This disables FRAM usage in PXF and erleboard. The reason is it's
failing and not being used. Right now we get this on startup:
root@beaglebone:~# ./ArduCopter.elf
FRAM: Online
Storage: FRAM is getting reset to default values
Failed to read FRAM
Testing with valgrind also reveals some invalid memory reads. Let's
disable it for now to be common with other boards.
This commit adds support for OpticalFlow to MinnowBoardMax trying to
leave the OpticalFlow implementation as generic as it already is.
We had to add some format conversion and software crop to the cameras that
do not have this features.
Most cameras do not support NV12 or GREY formats, we are adding in this commit
a conversion from YUYV format, that seems pretty common in cameras, to GREY
format (since we do not use Cb and Cr data on OpticalFlow).
Also we are adding a software crop for 8bpp images, such as GREY format. For
the same reason, most cameras do not have support for overlaying (crop, resize
and so on).
These functions are being added in order to be used in the next commits,
where we will add support for OpticalFlow on MinnowBoardMax.
This reverts commit 8cca0beba9.
The PWM input using the RPI DMA is causing trouble with RPI boards using
PPMSUM. Let's revert it until the solution is found. We still leave the
ifdef in RCInput for BH hat.
The initial idea was to export all pins to be used at once, so we
created _export_pins() to take all of them and a wrapper method,
_export_pin() to export a single one. However we never export more than
one pin at once.
- Replaced PATH_MAX by the maximum stack memory it will use for GPIO
paths
- Added more information to error logs
- Removed the '/n' when writing to GPIO sysfs files
- Using Linux Util write_file() on _pinMode()
Make sure pinMode() method exports the pin before using it. Otherwise
the export method would need to be called, differently from other GPIO
implementations.
Since now export_pin and export_pins are called only internally, reduce
their visibility to protected.
These errors were all over the VideoIn.cpp file:
libraries/AP_HAL_Linux/VideoIn.cpp: In member function 'bool Linux::VideoIn::allocate_buffers(uint32_t)':
libraries/AP_HAL_Linux/VideoIn.cpp:107:15: error: invalid conversion from 'uint32_t {aka unsigned int}' to 'v4l2_memory' [-fpermissive]
rb.memory = _memtype;
^
libraries/AP_HAL_Linux/VideoIn.cpp: In member function 'bool Linux::VideoIn::set_format(uint32_t*, uint32_t*, uint32_t*, uint32_t*, uint32_t*)':
libraries/AP_HAL_Linux/VideoIn.cpp:169:14: error: invalid conversion from 'int' to 'v4l2_buf_type' [-fpermissive]
fmt.type = V4L2_CAP_VIDEO_CAPTURE;
^
Add proper casts to fix the compilation.
Let it be a static const member instead of defining it in a header. The
problem with the header is that it will generate conflicting symbols
when more than 1 compilation unit includes it.
- Remove commented out defines
- Sort headers
- Remove ifdef for HAL_BOARD_SUBTYPE_LINUX_BEBOP inside the same ifdef
- Use AP_HAL::panic() instead of perror
- AP_HAL::panic() message doesn't take a '\n' and there's no return
statement after a call to this function
- Fix pointer placement
- Use pragma once
- Don't initialize members to 0, it's already the default behavior of
our custom allocator
Implementation of AP_HAL::OpticalFlow for an embedded camera sensor
There is the possibility to record video and also the gyro datas in order
to process the video off-board and debug possible issues.
Implementation of the PX4 flow algorithm for ardupilot.
Based on the original PX4 Flow code, it has diverged a lot.
I have kept the license header since it is required.
I have removed all the unused and dead code on current implementation,
modified the code to make it clearer, re-indented it and changed
the way some params are calculated. It has been tested on PC and
on board and showed results that I assumed were OK. No optical flow
Loiter tests have been undertaken since it requires a Sonar which will
be added soon.
Limitations :
Some parts were written in ARM assembly and I rewrote them very naively
to get them to be more easily portable. A simple optimisation would be
to re-introduce assembly code for ARM as a separate asm file with
methods for fixed resolutions that would reduce a lot the amount of
calculation and memory read/writes. Then writing a version in NEON
assembly would even be more optimised and then maybe an Intel version.
- No need to if/else if just returning
- Sort includes
- Fix missing space in log message
- When closing the fd, set it to -1. It's better to later fail the
operation than to operate on another random file descriptor
- Add some spaces to improve readability
- Use pragma once
- Do not initialize members to zero, it's already the behavior for our
custom allocator
VideoIn class is created that allows to setup a v4l2 interface
and capture buffers. I is based on yavta utility by Laurent Pinchart
and has been tested only on the bebop, though yavta works on any linux
platform.
- Replace tabs with spaces
- Sort includes
- No need to ifdef Linux inside AP_HAL_Linux
- Use early returns on error rather than a chain o if/else
- Use pragma once
- No need to initialize class members to 0, it's already our default
behavior
The camera sensor is connected on i2c bus for config
and on a parallel bus on the main SoC.
Currently, the i2c driver remains userland, but this is intended to
change in the future. The v4l2_subdev part is the way to go in the future
and it is the mainline way of configuring i2c camera sensors on Linux.
Currently only the max framerate is supported because it is the one that
is to be used on the bebop optical flow.
Newer esc firmware versions on bebop 1 and all the versions on bebop 2
have a different order for the motors in the i2c frame sent to the
esc contoller. This commit adds support for both versions by reading
the firmware version of the esc, using GET_INFO frame
This was previously used to allow to save a state in a SPIDriver so we
could synchronize the initialization of AP_Compass and
AP_InertialSensor.
It was only used by MPU9250 and is not used anymore since the move to
AuxiliaryBus initialization and it's not used anymore since c3dae6f
("AP_InertialSensor: MPU9250: Remove methods not used anymore")
As commented in 8218140 ("AP_Common: add scanf format macro"), "FORMAT"
was a bad name for this macro since there's also the scanf. Rename to
FMT_PRINTF to follow the scanf name.
Only compiled on Bebop, the constructor will need to be modified to
pass the pwm chip number and to create a PWM_Sysfs instead of a PWM_Sysfs_Bebop
in case it is used on a mainline linux board
- Make error path in constructor shorter and earlier. It's calling
panic() so there's no reason to do anything else
- We don't need to check variable for NULL when calling free()
- Change set/get_polarity to use a virtual function; this allows us
not to fail silently if _polarity_path is NULL for PWM_Sysfs.
PWM_Sysfs_Bebop just overrides this method and implement an empty
version.
Modify existing class to create a PWM_Sysfs_Base class and derive it for
Bebop and Pwm_Sysfs (mainline kernel)
use asprintf for path allocation since it doesn't cost so much and is done
only at startup
Note that the constructor of the 2 classes : PWM_Sysfs and PWM_Sysfs_Bebop
allocate the paths and the constructor and desctuctor of class PWM_Sysfs_Base
frees them.
only keep in memory the paths that are needed later, i.e free _export_path,
_duty_path. The remaining path are freed in the destructor
Implement the new AP_HAL functions and use them in the Scheduler when
possible.
The '_sketch_start_time' was renamed and moved as a detail of
implementation of the functions code. It allows the code to return time
starting from zero.
The 'stopped_clock_usec' was renamed to follow convention in the file
and add a getter so that AP_HAL functions can reach it. It's not a
problem this getter is public because in practice, regular code
shouldn't even access the Linux::Scheduler directly -- only code that
should is from Linux implementation.
For certain basic functionality, there aren't much benefit to be able to
vary the implementation easily at runtime. So instead of using virtual
functions, use regular functions that are "resolved" at link time. The
implementation of such functions is provided per board/platform.
Examples of functions that fit this include: getting the current
time (since boot), panic'ing, getting system information, rebooting.
These functions are less likely to benefit from the indirection provided
by virtual interfaces. For more complex hardware access APIs the
indirection makes more sense and ease the testing (when we have it!).
The idea is that instead of calling
hal.scheduler->panic("on the streets of london");
now use
AP_HAL::panic("on the streets of london");
A less important side-effect is that call-site code gets
smaller. Currently the compiler needs to get the hal, get the scheduler
pointer, get the right function pointer in the vtable for that
scheduler. And the call must include an extra parameter ("this"). Now it
will be just a function call, with the address resolved at link time.
This patch introduces the first functions that will be in the namespace,
further patches will implementations for each board and then switch the
call-sites. The extra init() function allow any initial setup needed for
the functions to work.
When there is already a driver registered on an i2c bus, the I2C_SLAVE ioctl
returns an error.
When it happens, it is better to display a warning and try to force the address.
It is especially useful on the bebop when killing the regular autopilot that uses
iio drivers to access the imu because else we would need to manually unbind the
driver in an init procedure.
I have added a warning because this error can also be resulting of another cause.
If the error is not EBUSY, then panic
If the I2C_SLAVE_FORCE ioctl fails then we panic because one of the i2c devices
won't be working properly.
Gustavo Jose de Sousa
mirkix
Lucas De Marchi
Julien BERAUD
Ricardo de Almeida Gonzaga
Aaron Wang Shi
Pritam Ghanghas
Víctor Mayoral Vilches
Víctor Mayoral Vilches
pkancir
José Roberto de Souza
Andrew Tridgell
Caio Marcelo de Oliveira Filho