Commit Graph

329 Commits

Author SHA1 Message Date
Leonard Hall 1a583c5382 AP_Motors: calc_roll_pwm based on throttle pwm range 2015-08-03 14:12:49 +09:00
Randy Mackay 5032cf9fbc Copter: init multicopter flags
Resolves coverity warning

Also fixed indentation
2015-07-25 14:00:29 +09:00
Randy Mackay e31f2d26c4 MotorsMulticopter: move get_hover_throttle_as_pwm to protected
No functional change
2015-07-21 16:27:04 +09:00
Randy Mackay c7c6228b5d MotorsMulticopter: remove virtual from set_yaw_headroom 2015-07-21 16:27:01 +09:00
Randy Mackay 4843be49de AP_MotorsTri: remove call to empty parent Init
Also rename uses of Multirotor to Multicopter
2015-07-21 16:25:48 +09:00
Randy Mackay f906934dfa AP_MotorsSingle: remove call to empty parent Init
Also rename uses of Multirotor to Multicopter
2015-07-21 16:25:45 +09:00
Randy Mackay 112e934072 AP_MotorsMatrix: remove call to empty parent Init
Also rename uses of Multirotor to Multicopter
2015-07-21 16:25:43 +09:00
Randy Mackay b1a4a6bf0a AP_Motors_Coax: remove call to empty parent Init
Also rename uses of Multirotor to Multicopter
2015-07-21 16:25:40 +09:00
Randy Mackay 4d1dfd94f5 AP_MotorsMulticopter: multicopter features moved in from parent
Also rename from multirotor to multicopter
2015-07-21 16:25:37 +09:00
Randy Mackay 7355ac9cb8 AP_MotorsHeli: implement empty slow start method 2015-07-21 16:25:34 +09:00
Randy Mackay a3fab10ef4 AP_MotorsHeli: init roll_radio_passthrough 2015-07-21 16:25:31 +09:00
Randy Mackay c9dedbd3b2 AP_Motors: remove multicopter only features
Also rename uses of Multirotor to Multicopter
2015-07-21 16:25:28 +09:00
Robert Lefebvre abb6eba291 AP_MotorsHeli: Change allow_arming check to use _rotor_speed_estimate
In future, this will be used to check actual rotor speed (measured) if available, to prevent trying to arm with the rotor spinning.
2015-07-21 16:25:21 +09:00
Robert Lefebvre 9fcbc77ce0 AP_MotorsHeli: Create rotor_speed_above_critical accessor 2015-07-21 16:25:11 +09:00
Robert Lefebvre 992c9c75bb AP_MotorsHeli: Create parameter_check method. 2015-07-21 16:25:04 +09:00
Robert Lefebvre e2fe640e6c Copter: Clean up helicopter allow_arming() function 2015-07-21 16:24:58 +09:00
Robert Lefebvre 61d6c5aa1d AP_Motors: Creation of AP_Motors_Multirotor class 2015-07-21 16:24:38 +09:00
Randy Mackay 8225e58454 AP_Motors: throttle_min method in 0 to 1000 range
Previously the pwm range value was returned.  This value is only used by
the multicopter attitude controller's angle boost function.
2015-07-20 20:44:46 +09:00
Randy Mackay 6bf6442396 MotorsMatrix; protect against divide by zero
This should never happen but just to be safe
2015-07-20 20:44:43 +09:00
Randy Mackay fa60c3dce8 MotorsCoax: fix output_armed_stabilized min thr limit 2015-07-20 20:44:36 +09:00
Randy Mackay 8a308205ce MotorsSingle: fix output_armed_stabilized min thr limit 2015-07-20 20:44:32 +09:00
Randy Mackay bd9a605086 MotorsTri: fix output_armed_stabilized min thr limit
_min_throttle is in the pwm range but was being used as if in the 0 to
1000 range
2015-07-20 20:44:23 +09:00
Randy Mackay e53c46bd8f MotorsMatrix: fix output_armed_stabilized min thr limit
_min_throttle was being used as if it were in the 0 to 1000 range when
in fact it is in the pwm range.  This meant the lower limit was too low.
2015-07-20 20:44:14 +09:00
Robert Lefebvre e1902e2289 AP_MotorsHeli: Remove unused _dt variable. 2015-07-14 20:13:43 +09:00
Robert Lefebvre 11214b3414 AP_Motors: move constraints to set_throttle 2015-06-22 13:52:59 +09:00
Robert Lefebvre 0c92565d23 AP_MotorsHeli: add Critical Rotor Speed param, use to switch off runup_complete 2015-06-19 15:10:53 +09:00
Robert Lefebvre 3ad6700c5d AP_MotorsHeli: add getters for rotor speed 2015-06-19 15:10:51 +09:00
Robert Lefebvre 8b917b82ee AP_MotorsHeli: Simplify set_desired_rotor_speed function definition 2015-06-19 15:10:50 +09:00
Robert Lefebvre 79e8c8f7f7 AP_MotorsHeli: whitespace fixes 2015-06-19 15:10:47 +09:00
Randy Mackay 2849430341 AP_Motors: init flags
resolves coverity issue
2015-06-08 14:46:16 +09:00
Andrew Tridgell d746e8fa29 AP_Motors: mark examples as nobuild
waiting for fix from Rob
2015-06-01 17:27:33 +10:00
Andrew Tridgell 89baf2bdf1 AP_Motors: convert example from .pde to .cpp 2015-06-01 17:07:05 +10:00
Robert Lefebvre 1424b17a83 AP_Motors_Heli: Change default RSC_SETPOINT to 700 2015-05-29 17:46:25 +09:00
Robert Lefebvre d24664ccf9 AP_MotorsHeli: Semantic change. Motor Runup to Rotor Runup 2015-05-29 17:46:18 +09:00
Robert Lefebvre 65ca09600c AP_Motors: Heli eliminate _dt member and fix rsc_runup calculation 2015-05-29 17:46:09 +09:00
Randy Mackay d777166c6f AP_MotorsTri: revert tail servo to Ch7 2015-05-25 22:27:38 +09:00
Randy Mackay 1a1fa7ca4b AP_MotorsHeli: add comment to avoid param conflict 2015-05-25 22:13:49 +09:00
Randy Mackay 4c94a69e33 AP_MotorsCoax: resolve param conflict with TradHeli 2015-05-25 22:13:47 +09:00
Randy Mackay 78b49fb4c6 AP_MotorsSingle: resolve param conflict with TradHeli
Also rename servo reverse parameters to be consistent with tricopter
2015-05-25 22:13:45 +09:00
Randy Mackay 8dc7cf7fa8 AP_MotorsTri: YAW_SV_REV values -1 or +1
Also resolve parameter conflict with TradHeli
2015-05-25 22:13:43 +09:00
Randy Mackay 71e4bccecb AP_Motors: init members in constructor
Also add f to end of float constants
2015-05-25 22:13:41 +09:00
Robert Lefebvre b8181b6b90 AP_Motors: RCMAP fix
Remove all RC Input channels passed as reference into AP_Motors.  All input handling self-contained inside AP_Motors.
Rework Tricopter to use internal servo calcs.
2015-05-25 22:13:32 +09:00
Jonathan Challinger 28731d2bdc AP_Motors: add throttle filter input constraint from -100 to 1100 2015-05-22 16:12:27 +09:00
Robert Lefebvre 73bafa131e AP_MotorsHeli: Overload output()
To protect it from future interference from Multirotor code.
2015-05-22 09:38:23 +09:00
Robert Lefebvre d3ce68a8ca AP_MotorsHeli: Overload update_throttle_filter()
Do not reset filter to zero when disarmed to allow collective pitch servo movement.
2015-05-22 09:38:20 +09:00
Randy Mackay 3d9a6a69e2 MotorsHeli: COLYAW to float 2015-05-08 14:14:36 +09:00
Randy Mackay edfa206bb8 Motors_Heli: nest heli params 2015-05-08 14:14:35 +09:00
Randy Mackay 68b05a4ca2 AP_Motors: is_throttle_mix_min returns bol 2015-05-08 14:14:32 +09:00
Leonard Hall 0f894ac1a8 AP_Motors: Rename and move Throttle Mix / Comp 2015-05-08 14:14:17 +09:00
Andrew Tridgell 2e57c62ebb AP_Motors: fix for HAL_SITL rename 2015-05-05 09:45:55 +10:00