Commit Graph

2522 Commits

Author SHA1 Message Date
Robert Taylor d82e82635f hwdef: switch CAN port definiton on Nucleo-496 hwdef
The CAN port as it was is a valid CAN port for the nucleo, but on the development board the CAN silkscreen is actually on PD0 and PD1. This change makes it easier to get the example running on the Nucleo
2024-09-26 08:31:50 +10:00
Peter Barker 14332fad52 hwdef: -Os on MFT-SEMA-100 to avoid flash overflow 2024-09-25 23:44:05 +10:00
Peter Barker c9de940fc8 hwdef: JHEMCU-GSF405A becomes minimize-fpv-osd 2024-09-25 17:12:44 +10:00
Thomas Watson 5f4a6dc2fb AP_HAL_ChibiOS: remove dependency on tmpnam
tmpnam is never linked and not necessary, and naming it/redefining it
introduces problems on platforms that do have a definition.
2024-09-24 22:49:18 +10:00
caijie 42c82f6c5d AP_HAL_ChibiOS: add VUAV-V7pro 2024-09-24 10:07:39 +10:00
bugobliterator 3d47f01dd4 AP_HAL_ChibiOS: enable TESTs on CubePilot-PPPGW 2024-09-19 11:44:22 +10:00
Henry Wurzburg 8c3621d021 hwdef: add bdshot to SpeedyBeeF405Wing
Co-authored-by: setup <alxdr64m@gmail.com>
2024-09-18 17:51:26 +10:00
Peter Barker cd9e7e095a hwdef: f103-GPS: explicltly nominiate compass backends supported
this target is overflowing as someone is trying to add a new compass..
2024-09-17 10:31:27 +10:00
Andrew Tridgell 9cb3354ba0 hwdef: default CAN MCAST enabled for PPPGW builds 2024-09-17 10:02:29 +10:00
Andrew Tridgell f065548866 hwdef: enable CAN multicast support in PPP gateways 2024-09-17 10:02:29 +10:00
Peter Barker 66a2788663 hwdef: RadioLinkPIX6 uses SPL06 driver 2024-09-11 18:27:47 +10:00
Thomas Watson 854b769cfe hwdef: remove non-ublox GPSes from MatekL431-Periph
Saves enough flash to get it building again (11K now free). These
backends are default for other boards and so are built in CI.
2024-09-10 12:30:23 +10:00
Eric a1a4c63881 hwdef: add mpu6000 to support ReaperF745 V4 FC 2024-09-06 21:19:32 +10:00
Peter Barker 784760342d Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines 2024-09-06 11:53:09 +10:00
jamming 4d3e97533d AP_HAL_ChibiOS: Add a new target Holybro DroneCAN-pmu 2024-09-06 08:50:20 +10:00
Peter Barker bfcac18eb2 hwdef: GEPRCF745BTHD: rely on custom builds for external baros
this is overflowing - it has an onboard baro, that will have to do...
2024-09-06 08:49:57 +10:00
Peter Barker 61b1a2d525 hwdef: remove SMBus battery support from all minimize-fpv boards
I doubt there's a single one of these boards on the planet using stock firmware and smbus batteries.  If they exist, the custom build server can re-add this
2024-09-06 08:49:28 +10:00
Jacob Dahl d96926050b hwdef: ARKV6x: fix RC input 2024-09-06 08:45:57 +10:00
khimaros 2e1af82044 AP_HAL_Chibios: default to MavLinkV1 on CubeSolo
see also https://github.com/ArduPilot/ardupilot/issues/22155
2024-09-04 19:13:05 +10:00
romi2002 e6d35b08cb hwdef: enable flash-from-SD on Pixhawk6C
Enabled flash-from-SD support on Pixhawk6C bootloader based off Pixhawk6X hwdef (3b230c4).
2024-09-04 19:08:46 +10:00
Peter Barker 40e367e14f AP_HAL_ChibiOS: avoid use of global signed_fw in ChibiOSHWdef object 2024-09-04 09:52:55 +10:00
Peter Barker 53b726271f AP_HAL_ChibiOS: avoid use of global args in ChibiOSHWdef object 2024-09-04 09:52:55 +10:00
Hubert b971046a07 hwdef: Update hwdef for MicoAir405v2 and MicoAir405mini
Update MicoAir405v2 hwdef.dat: enable OPTICALFLOW

Update MicoAir405v2 defaults.parm: enable OSD_TYPE2 and adjust LOG_FILE_BUFSIZE from 16 to 8

Update MicoAir405Mini defaults.parm: adjust LOG_FILE_BUFSIZE from 16 to 8
2024-09-04 09:52:30 +10:00
Andrew Tridgell 34c1c70cc4 hwdef: rename BotBloxSwitch to BotBloxDroneNet 2024-09-04 09:03:56 +10:00
Aaron Elijah b63865cdc5 hwdef: force 100MBit fullduplex for BotBloxSwitch
auto-negotiation doesn't work

also disable TX/RX swap as not needed on final board
2024-09-03 10:41:58 +10:00
cuav-chen2 18cb1f3899 HAL_ChibiOS: change battery scale for CUAV-7-Nano flight controller 2024-09-02 12:23:08 +10:00
bugobliterator 957e92aca1 AP_HAL_ChibiOS: use CubePilot-CANMod's Serial Order 2024-08-28 18:20:29 +10:00
Wu a33a0d1579 HAL_ChibiOS: fixed the imu orientation of RadiolinkPIX6 2024-08-27 10:26:50 +10:00
Wu 52c94e2a5b AP_HAL_ChibiOS: add SPA06 baro for RadiolinkPIX6 2024-08-23 18:38:27 +10:00
jamming 988d50fd9b hwdef: Add IST8310 and RM3100 Compass support for HolybroG4_GPS 2024-08-22 08:57:18 +10:00
jamming a3c930be7b AP_HAL_ChibiOS: Add a new target HolybroG4 DroneCAN Airspeed 2024-08-22 08:56:22 +10:00
Andy Piper 08bf7c6163 AP_HAL_ChibiOS: Flywoo H743 Pro 2024-08-13 10:20:15 +10:00
mikefenghao ff30224079 AP_HAL_ChibiOS:added new hardware PixPilot-V6PRO 2024-08-10 11:06:33 +10:00
Andy Piper c8989837bc AP_HAL_ChibiOS: KakuteF4-Wing 2024-08-07 17:34:34 +10:00
Andy Piper 30ce705765 AP_HAL_ChibiOS: fix TMotor H743 with BMI270 2024-08-07 17:30:44 +10:00
Peter Barker 516c2a853f hwdef: add named Pixhack-v3 board
allows for building this on the custom build server
2024-08-06 10:29:05 +10:00
YI-BOYANG 559a6e8f65 AP_HAL_ChibiOS: hwdef for GEPRCF745BTHD 2024-08-06 09:12:23 +10:00
Peter Barker 923b5185c6 AP_HAL_ChibiOS: rename OFFBOARD_GUIDED to AP_PLANE_OFFBOARD_GUIDED_SLEW_ENABLED
and remove comparison vs ENABLED
2024-08-05 10:20:14 +10:00
Peter Barker ba2bec07fa AP_HAL_ChibiOS: add env option to omit hwdef.dat from romfs 2024-08-05 10:20:14 +10:00
Andrew Tridgell 9543eecf23 HAL_ChibiOS: fixed AP_FILESYSTEM_ROMFS_ENABLED for peripherals with defaults.parm
now that defaults are in ROMFS we must enable
AP_FILESYSTEM_ROMFS_ENABLED
2024-08-04 17:36:31 +10:00
EternAlmox 2ad7177a39 AP_HAL_ChibiOS: added MFT-SEMA100 2024-08-02 18:40:59 +10:00
Andy Piper b9bde4c488 AP_HAL_ChibiOS: add servo outputs as motors to FoxeerF405v2 2024-07-31 17:27:44 +10:00
Henry Wurzburg 847b8eab25 HWDEF:fix CUAV-7-Nano default batt monitor 2024-07-31 17:13:09 +10:00
“Jane_ZeroOne” d43dd5227a AP_HAL_ChibiOS: add ZeroOneX6 2024-07-30 20:07:31 +10:00
Peter Barker 95281e5c17 hwdef: turn monior thread back on on some boards
most of these boards probably don't need it, but to make a PR no-binary-output...
2024-07-30 10:52:36 +10:00
Peter Barker 90b2a2acaa hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
... and use a default value for peripherals
2024-07-30 10:52:36 +10:00
Peter Barker f3766b831a AP_HAL_ChibiOS: make include file mistakes nicer to interpret 2024-07-30 09:57:01 +10:00
cuav-chen2 08c8ef379b HAL_ChibiOS: Added support for CUAV-7-Nano flight controller 2024-07-29 12:25:53 +10:00
Thomas Watson bbde876353 hwdef: remove EKF opinion from FlywooF745
No effect as lines have always been commented out, but not useful and
EKF2 is not something to encourage.

Verified no compiler output change.
2024-07-29 09:32:22 +10:00
Peter Barker debf3cb28e hwdef: SpeedyBeeF405WING: restrict mount support to the servo gimbal 2024-07-28 12:00:02 +10:00