Andrew Tridgell
c66008cdfa
Plane: fixed displayname for FENCE_AUTOENABLE
2014-04-08 09:13:39 +10:00
Andrew Tridgell
95764f4d78
Plane: fixed allocation and reporting of fence status
...
prevent a false fence active report on boot, and prevent the fence
from loading when it is not needed. This saves about 200 bytes of ram
on APM2 for most users
2014-04-07 17:28:03 +10:00
Michael Oborne
3fe9486868
Plane: fix auto doc unit on GROUND_STEER_DPS
2014-04-07 13:43:15 +10:00
Andrew Tridgell
de3c04adaf
Plane: show next wp when not running a mission
...
this lets the GCS know what wp would be run if auto mode is selected
2014-04-07 11:40:58 +10:00
Andrew Tridgell
1fe7b2fe18
Plane: update for new APM_OBC API
2014-04-07 07:28:35 +10:00
Andrew Tridgell
f7858bfb0a
Plane: added support for SERIAL_CONTROL message
2014-04-05 07:34:33 +11:00
Andrew Tridgell
5a84fb96ed
Plane: build fix
2014-04-03 20:54:50 +11:00
Andrew Tridgell
1efadb7a05
Plane: fixed some warnings
2014-04-03 12:48:06 +11:00
Andrew Tridgell
3c33eb3f09
Plane: use new channel output API
2014-04-03 12:19:11 +11:00
Andrew Tridgell
88693796ef
Plane: update for GPS.setHIL() API
2014-04-02 07:55:28 +11:00
Andrew Tridgell
e19341ca32
Plane: convert to new GPS driver API
2014-04-01 06:38:24 +11:00
Andrew Tridgell
958e17f4ff
Plane: use AP_GPS_Auto for 2nd GPS
2014-04-01 06:38:23 +11:00
Andrew Tridgell
14671d0bcd
Plane: fixed previous_mode error in geofence
...
when we were in MANUAL we would switch back to STABILIZE
2014-03-29 13:53:19 +11:00
Andrew Tridgell
bcbdb15c7d
Plane: changed version to 2.79beta1
2014-03-28 09:47:59 +11:00
Andrew Tridgell
61ebf365d9
Plane: fixed reverting modes when FENCE_SET_RALLY is enabled
...
we need to keep the guided destination we are using
2014-03-27 10:41:24 +11:00
Andrew Tridgell
8639676eb3
Plane: we need 5 points for a valid geofence
...
the first and last points need to be the same for it to be a closed
polygon
2014-03-27 10:40:00 +11:00
Michael Day
268b1e85a1
Plane: Changes needed prior to merging with master identified by Tridge.
2014-03-27 09:26:20 +11:00
Michael Day
f921d4fbac
Plane: FENCE_RET_RALLY param. Plane returns to rally point on breach.
2014-03-27 09:26:20 +11:00
Michael Day
25f23cf16c
Plane: Sends MAV_SYS_STATUS_GEOFENCE and also allows GCS to enable/disable fence.
2014-03-27 09:26:20 +11:00
Andrew Tridgell
32a1c717e6
Plane: report up to 18 RC input channels via MAVLink
2014-03-25 14:47:43 +11:00
Andrew Tridgell
ff70c87f0b
Plane: support 14 RC channels on PX4
2014-03-25 14:47:05 +11:00
Andrew Tridgell
09ed8d5819
Plane: updates for new RCInput API
2014-03-25 14:47:05 +11:00
Andrew Tridgell
b8781ccea7
Plane: fixed a compiler warning
2014-03-24 12:52:05 +11:00
Andrew Tridgell
e8b9f22b01
Plane: updates for GPS changes
2014-03-24 12:04:31 +11:00
Andrew Tridgell
d124fdb182
Plane: report compass unhealthy if primary compass unhealthy
2014-03-24 07:03:53 +11:00
Andrew Tridgell
f6b56b5d26
Plane: fixed mission resume at arbitrary waypoints
...
on completion of a mission a user can ask for it to resume at any wp
2014-03-21 10:21:37 +11:00
Andrew Tridgell
861523a00a
Plane: use TECS get_target_airspeed()
2014-03-20 17:34:33 +11:00
Michael Day
dd06756abf
Plane: Add Log_Write_Radio. MASK_LOG_PM must be set for logging to occur.
2014-03-20 09:56:37 +11:00
Andrew Tridgell
4257d8365c
Plane: removed check on target_component in ARM/DISARM
...
Thanks to DonLakeFlyer for finding this, see
https://github.com/diydrones/ardupilot/pull/909
2014-03-20 09:06:48 +11:00
Andrew Tridgell
ce3f40b095
Plane: use should_log() for more msgs
2014-03-19 14:18:14 +11:00
Andrew Tridgell
abfcee1cef
Plane: fixed channel reversal in HIL
...
makes it possible to reverse channels
2014-03-19 14:17:40 +11:00
Randy Mackay
3ce56f3086
Plane: integrate Mission cmd field changes
2014-03-19 12:14:24 +09:00
Andrew Tridgell
4031f7d368
Plane: use common deferred message handling
2014-03-19 12:14:17 +09:00
Andrew Tridgell
b74fddade3
Plane: use common MISSION_ITEM code
2014-03-19 12:14:11 +09:00
Andrew Tridgell
0d39f354b0
Plane: use new common MAVLink code
2014-03-19 12:13:38 +09:00
Andrew Tridgell
7d3523b4a7
Plane: use _send_buf() functions to reduce stack usage in MAVLink replies
...
this re-uses the incoming message buffer in constructing the reply
2014-03-19 12:13:28 +09:00
Andrew Tridgell
537e78f9fa
Plane: much faster mission upload
...
send next WP request immediately if possible. This speeds up mission
upload on USB by about 10x
2014-03-19 12:13:27 +09:00
Randy Mackay
1ad743c4e1
Plane: use common GCS_MAVLink handle_mission methods
2014-03-19 12:13:21 +09:00
Andrew Tridgell
740ecc2c1b
Plane: use new handle_mission_request() function
2014-03-19 12:13:12 +09:00
Randy Mackay
2184ff1e58
Plane: set_next_WP fn accepts Location
2014-03-19 12:13:06 +09:00
Randy Mackay
96b2e88e36
Plane: add comment to GCS_Mavlink.pde
2014-03-19 12:13:03 +09:00
Randy Mackay
ce9f2ef7f0
Plane: minor command logic comments and reordering
2014-03-19 12:13:01 +09:00
Randy Mackay
ad4f30e790
Plane: use mission command specific structures
2014-03-19 12:12:52 +09:00
Randy Mackay
9ef920b0be
Plane: integrate dataflash Log_Write_MavCmd
2014-03-19 12:12:45 +09:00
Andrew Tridgell
4bf140aeac
Plane: make next_WP and prev_WP be locations
...
having a command ID in them doesn't really make sense
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-03-19 12:12:39 +09:00
Randy Mackay
f1b97fee53
Plane: correct typo re RTL home with no mission
2014-03-19 12:12:33 +09:00
Randy Mackay
7f21e3885e
Plane: RTL home when AUTO run with no mission
2014-03-19 12:12:31 +09:00
Randy Mackay
6b789cd711
Plane: rename next_nav_command to auto_rtl_command
...
This command is only used to get the vehicle home (or to a rally point)
after the mission has completed
2014-03-19 12:12:30 +09:00
Randy Mackay
982ce56d2b
Plane: bug fix to set_current_cmd
...
When set_current_cmd mavlink message is received, resume mission only if
the mission has completed.
Stop mission when vehicle leaves AUTO mode.
2014-03-19 12:12:28 +09:00
Andrew Tridgell
3e05baf95c
Plane: fixed build (forward declarations)
2014-03-19 12:12:25 +09:00
