Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
32,973 Commits 71 Branches 509 Tags 731 MiB
Commit Graph

32973 Commits

Author SHA1 Message Date
Andrew Tridgell 777b4c8cfe DataFlash: avoid stat of current log file 
this avoids getting invalid data base for stat() for the current log
file.

It also only gives up writing to a log file if writes fail for 2
seconds. This avoids a temporary write failure causing the log to be
closed (that can happen on ChibiOS with directory listing while writing)
 2018-06-14 14:55:41 +10:00
Andrew Tridgell 8a2f1fdb3d AP_Airspeed: fixed airspeed filtering issue 
this fixes an issue where an airspeed sensor that becomes unhealthy
can have an undue effect after the sensor becomes healthy again.

In a recent flight log the MS4525 airspeed sensor went unhealthy for a
few seconds, and at the same time gave a reading of 12m/s. The plane
was flying at 24m/s. While the sensor was unhealthy the code correctly
switched to the airspeed estimate, which was fine.

When the airspeed sensor become healthy again the IIR filter in
AP_Airspeed meant that the speed read at 12m/s initially, then came up
to 24m/s over a couple of seconds. This caused the VTOL motors to come
on for a few seconds.
 2018-06-14 09:13:30 +10:00
Andrew Tridgell 10ca1e78e8 HAL_ChibiOS: switched to Mode3 on SPI1 
this is now working correctly
 2018-06-13 20:05:26 +10:00
Andrew Tridgell b9528afcd2 ChibiOS: submodule update 
fixed Mode3 on SPI1 and I2C4 DMA channels
 2018-06-13 20:05:26 +10:00
Andrew Tridgell 9d248456e4 HAL_ChibiOS: re-enable I2C4 DMA for F765 
now we have fixed the error from the datasheet we can do DMA
 2018-06-13 20:05:26 +10:00
Andrew Tridgell ad3eca4e6b HAL_ChibiOS: fixed I2C4 DMA streams 
There is an error in the datasheet. See
https://community.st.com/thread/50484-documentation-error-on-dma-channels-for-i2c4-on-stm32f7
 2018-06-13 20:05:26 +10:00
Andrew Tridgell 62e8fbb9d3 HAL_ChibiOS: fixed OMNIBUSF7V2 hwdef.dat 2018-06-13 20:05:26 +10:00
Andrew Tridgell f4f086d208 ChibiOS: submodule update 
support non-DMA mode for I2C
 2018-06-13 20:05:26 +10:00
Andrew Tridgell e068106669 HAL_ChibiOS: support I2C devices on STM32F7 without DMA 
this allows us to support I2C4 on fmuv5
 2018-06-13 20:05:26 +10:00
Randy Mackay 2af8e673cc Copter: add cork-push to esc calibration 
Also remove unnecessary duplicate call to motors::set_throttle_passthrough_for_esc_calibration
 2018-06-13 13:20:08 +09:00
Randy Mackay 41767e0458 Copter: esc calibration fix 2018-06-13 13:20:08 +09:00
chobits 0d2b70e607 GCS_MAVLink: fix ATT_POS_MOCAP timestamp handle 2018-06-13 09:43:42 +09:00
Patrick José Pereira d3da8f2914 Sub: Add attitude control with althold via mavlink 
Allow ordinary attitude positions without a gps system

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2018-06-12 17:27:56 -04:00
Patrick José Pereira 3701fc0937 Sub: Move from micros() to AP_HAL::micros() 
AP_HAL::micros() is a more common style around the rest of the project

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2018-06-12 17:27:56 -04:00
Patrick José Pereira 4de371743e Sub: Move from millis() to AP_HAL::millis() 
AP_HAL::millis() is a more common style around the rest of the project

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2018-06-12 17:27:56 -04:00
Patrick José Pereira a856f747aa Sub: Organize descend climb_rate calc 
Make it more clear to read

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2018-06-12 17:27:56 -04:00
Randy Mackay 3ca520021b Rover: version to 3.4.2-dev 2018-06-12 20:57:25 +09:00
Randy Mackay a566ad48e9 Rover: 3.4.1-rc1 release notes 2018-06-12 20:56:50 +09:00
Randy Mackay c650c52577 Rover: 3.4.0 release notes 2018-06-12 18:20:11 +09:00
Randy Mackay 5e7b37f0b2 AR_AttitudeControl: remove constraint on steering output 2018-06-12 17:44:10 +09:00
Randy Mackay f0780c7bb1 AP_MotorsUGV: minor comment fix 2018-06-12 17:44:10 +09:00
Randy Mackay 1c0d9c7512 AP_MotorsUGV: MOT_SPD_SCA_BASE param for min speed scaling 
This replaces the hardcoded 1m/s start point for speed scaling with a configurable value
 2018-06-12 17:44:10 +09:00
Randy Mackay 5faff519c3 AP_MotorsUGV: steering limits and constraint done by each output handler 
each motor output handler (regular, skid, omni) becomes responsible for constraining the steering input (if required) and setting the limits flags
it is possible to reduce duplicate code but I think it might be more important to keep it clear which level is responsible for the limiting and constraining of steering
 2018-06-12 17:44:10 +09:00
Michael du Breuil 95eda5d9b7 RC_Channel: Remove unneeded interfaces 2018-06-11 16:29:36 -07:00
Michael du Breuil c85f8c7bf5 Rover: Simplify radio trimming, improve MAVLink report 2018-06-11 16:29:36 -07:00
Michael du Breuil 12da35220c Plane: Simplify radio trimming, improve MAVLink report 2018-06-11 16:29:36 -07:00
Randy Mackay b69155793f Rover: add Log_Write_Depth 2018-06-12 08:29:08 +09:00
Randy Mackay d34c87a457 Rover: alphabetise Log_Write methods 2018-06-12 08:29:08 +09:00
Randy Mackay c51b38cd1c Rover: rename Log_Arm_Disarm to Log_Write_Arm_Disarm 2018-06-12 08:29:08 +09:00
Randy Mackay 10d89f1315 Rover: remove unimplemented Log_Write_Performance declaration 2018-06-12 08:29:08 +09:00
Michael du Breuil 9fbe6e624a Git: Add .gdbinit to list of ignored files 2018-06-12 09:08:58 +10:00
Michael du Breuil fae8d1e489 Plane: Log navigation target location 
Closes #4358
 2018-06-12 09:08:58 +10:00
Andrew Tridgell b225868711 AP_Compass: detect conflict between AK09916 and ICM20948 
this detects if we have both a AK09916 and an ICM20948 on the same i2c
bus. If that is found then the ICM20948 is disabled as it otherwise we
will have two devices on the same i2c address
 2018-06-12 09:04:43 +10:00
Jacob Walser c4175be7aa AP_Camera: explicitly specify floats 2018-06-11 15:57:48 -04:00
Peter Barker 32b8b86019 Sub: move handling of MAV_CMD_DO_GRIPPER up 2018-06-11 19:07:39 +01:00
Peter Barker 955baa47c2 Copter: move handling of MAV_CMD_DO_GRIPPER up 2018-06-11 19:07:39 +01:00
Peter Barker 2cdcca2841 Plane: move handling of MAV_CMD_DO_GRIPPER up 2018-06-11 19:07:39 +01:00
Peter Barker b0aeec4b6a GCS_MAVLink: move handling of MAV_CMD_DO_GRIPPER up 2018-06-11 19:07:39 +01:00
Peter Barker ef33d62cc3 mk: include Gripper in all builds 2018-06-11 19:07:39 +01:00
Peter Barker 684482295e Tools: include Gripper in all builds 2018-06-11 19:07:39 +01:00
Peter Barker 8a3df17a07 AP_Gripper: add singleton 2018-06-11 19:07:39 +01:00
Alexander Malishev 289b93c3d0 HAL_ChibiOS: added parse_timer to chibios_hwdef.dat 2018-06-11 18:32:17 +10:00
apinxiko e440583a7c Copter: Beeping when first reaching waypoint while in holding there 2018-06-11 16:45:48 +09:00
apinxiko 5df4b9f6fd Beeping when first reaching waypoint even while in holding there 2018-06-11 16:45:48 +09:00
chobits 75c2a2b02a Copter: check for fence breaches when disarmed 2018-06-11 11:41:10 +09:00
murata 4d5e258b19 AP_NavEKF3: Delete unused definitions 2018-06-11 09:11:44 +09:00
murata a9b2b9dddf AP_NavEKF2: Delete unused definitions 2018-06-11 09:11:44 +09:00
Randy Mackay 631d8f5423 Rover: accept do-change-speed commands with high speeds 2018-06-11 09:10:35 +09:00
Randy Mackay a08a955cbc Rover: accept DO_CHANGE_SPEED commands 2018-06-11 09:10:35 +09:00
Randy Mackay 8464e82812 Rover: set_desired_speed range checks speed 2018-06-11 09:10:35 +09:00