Andrew Tridgell
c59bdc12df
AP_Compass: fix the milligauss handling
...
the previous approach assumed a 1:1 mapping between compass backends
and compass instances, which isn't true on PX4.
It also only setup milligauss offsets on a set_and_save call, which is
not the only way offsets change
this adds a milligauss_ratio per instance, which is considerably
simpler
2015-09-09 14:53:11 +10:00
Staroselskii Georgii
e93ff44a97
AP_Compass: make a transition to milligauss in Compass library
2015-09-09 10:38:16 +10:00
Siddharth Bharat Purohit
6a603eb594
Compass_cal: implement the concept of auto and mandatory user reboot after cal
2015-09-03 16:59:13 +10:00
Jonathan Challinger
de600ca3da
AP_Compass: configured() only checks compasses with _USE set
2015-09-03 16:59:12 +10:00
Jonathan Challinger
cc36401b7c
AP_Compass: add calibration interface
2015-09-03 16:59:11 +10:00
Jonathan Challinger
f20ef69777
Compass: add soft-iron corrections
2015-09-03 16:59:09 +10:00
Lucas De Marchi
a66a201bf5
AP_Compass: HMC5843: Add support for MPU6000 auxiliary bus
...
Allow HMC5843 to be on MPU6000's auxiliary bus.
2015-08-28 12:39:09 +10:00
Lucas De Marchi
c66c9c41f2
AP_Compass: HMC5843: be agnostic to I2C bus
...
Like was done to inertial AK8963 and inertial sensor move the decision
regarding the I2C bus to the caller. We don't allow changing the address
because apparently HMC5843 doesn't support different addresses.
Changing only the bus could be more easily done but this prepares the
ground for using HMC5843 on an AuxiliarBus.
The need for a more generic abstraction is evidenced by this commit: a
"SerialBus" in AP_HAL would be a nice addition rather than letting each
driver to provide its own. However the methods are a little bit
different from what we have in AK8963. It's safer to do the simple
conversion now and later on to add the abstraction changing everybody to
use it.
2015-08-28 12:39:09 +10:00
Lucas De Marchi
a5df93bf10
AP_Compass: AK8963: be agnostic to I2C bus/address
...
This decision is better made by the caller rather than polluting the
driver with board-specific details.
2015-08-28 12:39:08 +10:00
Lucas De Marchi
d92c2ac9f5
AP_Compass: pass backend instead of pointer to function
...
Just like was done for inertial sensor, different detect() functions
might need different arguments and passing a pointer to function here is
cumbersome. For example, it forces to have a method like "detect_i2c2"
rather than allowing hal.i2c2 to be passed as parameter.
2015-08-28 12:39:08 +10:00
Andrew Tridgell
69a86a78a6
AP_Compass: removed AVR1280 specific ifdef
2015-08-11 16:47:41 +10:00
Gustavo Jose de Sousa
58f300e78e
AP_Compass: standardize inclusion of libaries headers
...
This commit changes the way libraries headers are included in source files:
- If the header is in the same directory the source belongs to, so the
notation '#include ""' is used with the path relative to the directory
containing the source.
- If the header is outside the directory containing the source, then we use
the notation '#include <>' with the path relative to libraries folder.
Some of the advantages of such approach:
- Only one search path for libraries headers.
- OSs like Windows may have a better lookup time.
2015-08-11 16:28:42 +10:00
Randy Mackay
cedc9a8670
Compass: add last_update_usec per instance
2015-07-17 10:02:41 +09:00
Julien BERAUD
51c3c499e2
AP_Compass: support AK8963 on I2C
2015-07-10 16:46:30 +10:00
Julien BERAUD
0b41da0dea
AP_Compass: rework to make the bus generic for AK8963
...
Supporting only MPU9250, prepare to implement another bus, i.e i2c on the
bebop
2015-07-10 16:46:29 +10:00
Staroselskii Georgii
26c8007c96
AP_Compass: updated backend detect method
...
Uses reimplemented AK8963 driver. There's also no need trying to detect this
compass twice. Actually, it might even be bad, because the current code can
allocate an AK8963 object twice.
2015-07-06 10:48:06 +10:00
Randy Mackay
43b1694c76
Compass: add third compass to PRIMARY param description
2015-07-02 14:19:30 +09:00
Andrew Tridgell
edc21cfa38
AP_Compass: make having no compass backends non-fatal
...
thanks to Daniel for spotting this
2015-05-26 14:23:40 +10:00
Andrew Tridgell
91b4ba3588
AP_Compass: allow for more than one compass in HIL/SITL
2015-05-15 14:25:44 +10:00
Andrew Tridgell
015fce5183
AP_Compass: revert AP_Math class change
2015-05-05 13:27:06 +10:00
Tom Pittenger
d09ef4783d
AP_Compass: compiler warnings: reorder constructors
2015-05-05 13:26:52 +10:00
Tom Pittenger
ad11a57f57
AP_Compass: compiler warnings: apply is_zero(float) or is_equal(float)
2015-05-05 13:26:51 +10:00
Tom Pittenger
16e71ec1ce
Compass: fix compile warning re member init order
2015-04-24 14:15:00 +09:00
Andrew Tridgell
dcb25632fb
AP_Compass: removed old setHIL compass offset
2015-04-21 08:30:05 +10:00
Andrew Tridgell
d7000c4105
AP_Compass: fixed compass timestamps in Replay
2015-04-20 15:12:51 +10:00
Andrew Tridgell
1962706a33
AP_Compass: fixed last_update, using last_update_usec()
...
this broke use of compass in the EKF
2015-03-14 12:31:23 +11:00
Andrew Tridgell
fec2025469
AP_Compass: added set_hil_mode()
2015-03-13 22:52:55 +11:00
Andrew Tridgell
0efd3bacea
AP_Compass: make new backend match old PX4 behaviour
...
when a compass is internal only apply board orientation, not user
specified rotation
2015-03-13 18:46:15 +11:00
Andrew Tridgell
a871c87cad
AP_Compass: use state array for compass variables
2015-03-13 18:46:15 +11:00
Víctor Mayoral Vilches
d3b76cd8d3
AP_Compass: split compass into frontend/backend
2015-03-13 18:46:15 +11:00
Randy Mackay
ffbc3862bd
Compass: update compass orient param description
...
Update rotation 38 to Yaw293Pitch68Roll90
2015-01-02 17:19:12 +09:00
Randy Mackay
20f3f19285
Compass: add new rotation to ORIENT param description
2014-11-22 14:13:25 +09:00
Randy Mackay
31087e4f20
Compass: shorten EXTERNAL2/3 to EXTERN2/3
...
Bug discovered by Michael Day
2014-11-08 10:21:22 +09:00
Andrew Tridgell
7db0244dac
AP_Compass: added some comments
2014-10-19 17:02:45 +11:00
Jonathan Challinger
9054dd3f9a
AP_Compass: use apply_correction_function to eliminate duplication
2014-10-19 17:02:45 +11:00
Andrew Tridgell
b437977547
AP_Compass: added set_offsets() interface
...
this will be used by Replay to prevent the need for saving parameters
2014-10-15 09:16:31 +11:00
Randy Mackay
023b6afe8b
Compass: add ORIENT2 and EXTERNAL2 params
2014-10-01 13:02:03 +10:00
Randy Mackay
798cc36e64
Compass: use_for_yaw for each compass
2014-10-01 13:02:02 +10:00
Randy Mackay
e14ae0c0b1
Compass: param descriptions for OFS2, MOT2
2014-09-27 17:59:26 +09:00
Randy Mackay
c2c5807ec7
Compass: always default devid to zero
2014-09-23 20:35:18 +09:00
Randy Mackay
1f579563e6
Compass: set_motor_compensation takes instance as first parameter
...
Also get_motor_compensation uses primary compass
2014-07-22 21:59:04 +09:00
Randy Mackay
47801a6c4d
Compass: bug fix to init of device id
...
Also init members to reduce compiler warnings
2014-07-16 14:29:10 +09:00
Craig Elder
c9f3adcb5c
Compass: Updated COMPASS_PRIMARY parameter description
2014-07-10 15:32:06 -07:00
Craig Elder
0ecd12b1c6
AP_Compass: Corrected typo in parameter description
...
Corrected typo in parameter description
2014-07-10 14:19:19 -07:00
Randy Mackay
4995b9ada8
Compass: default device id to zero
2014-07-10 20:25:36 +09:00
Randy Mackay
16d4af8346
Compass: sanity check instance in set_and_save_offsets
2014-07-10 20:25:32 +09:00
Randy Mackay
108c878b04
Compass: set_offsets modified to also save offsets
2014-07-10 20:25:08 +09:00
Randy Mackay
124bd4b489
Compass: save_offsets accepts compass instance
2014-07-10 20:25:05 +09:00
Randy Mackay
b7f33d81ad
Compass: add DEV_ID param and configured method
...
These allow checking the offsets were created with the current compass
device.
2014-07-10 20:24:44 +09:00
Andrew Tridgell
c138244155
AP_Compass: support 3 mags on PX4
2014-07-04 12:07:47 +10:00
