Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,494 Commits 71 Branches 509 Tags 780 MiB
Commit Graph

21 Commits

Author SHA1 Message Date
Andrew Tridgell 70f18289c5 GPS: fixed auto-config of UBlox setup with no UBX messages 
if a UBlox is configured for NMEA only, with no UBX messages at all
then it would never trigger the GPS_AUTO detection. This adds a UBX
config message to the init strings that enables the NAV_SOL message
 2012-06-15 15:53:27 +10:00
Andrew Tridgell 33a2ad7e07 GPS: add stub settings for nav_setting in the other GPS drivers 
only Ublox supports nav_setting so far
 2012-06-10 16:34:53 +10:00
Andrew Tridgell a8bfc5d8e9 GPS: re-open the serial port with a 256 byte serial receive buffer 
this ensures all GPS parsers have a 256 byte buffer available
 2012-06-08 16:42:03 +10:00
Andrew Tridgell 711814085b GPS: detect new style 3DR UBlox 2012-04-20 22:05:30 +10:00
Andrew Tridgell 7fbfcc2721 GPS: fixed some stdint types 2012-03-10 10:34:29 +11:00
Andrew Tridgell 1f05e7dafb fixed types in GPS detect code 
using int everywhere is wasteful and non-portable
 2012-02-13 16:22:53 +11:00
Michael Oborne 306e2e3f7d add gps character count. 
this problem happens when the mtk ends up in nmea mode at 10hz. there is no 50ms window of no activity
 2011-12-31 13:05:33 +08:00
Michael Oborne 3d85f99546 remove gps callback in wait loop 2011-12-31 09:35:40 +08:00
James Goppert 14d27b1e4c Cleaned up AP_GPS formatting. 2011-10-28 14:52:50 -04:00
tridge60@gmail.com 91e101f47e GPS: added delay hook for GPS detection 
this allows for MAVLink to be up during GPS detection

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2987 f9c3cf11-9bcb-44bc-f272-b75c42450872
 2011-07-31 22:34:37 +00:00
deweibel@gmail.com 8d7e7ff58e revert gps lib to 2602 
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2608 f9c3cf11-9bcb-44bc-f272-b75c42450872
 2011-06-21 01:38:31 +00:00
deweibel@gmail.com 5b9e7eff9d clean up idleTimeout 
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2606 f9c3cf11-9bcb-44bc-f272-b75c42450872
 2011-06-21 01:20:39 +00:00
jasonshort 76d072591b made timeout public, settable 
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2563 f9c3cf11-9bcb-44bc-f272-b75c42450872
 2011-06-16 16:33:08 +00:00
james.goppert 7809b0ca2a Massive warning fixes. 
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2089 f9c3cf11-9bcb-44bc-f272-b75c42450872
 2011-05-04 19:12:27 +00:00
tridge60@gmail.com 860998d337 implemented typesafe PSTR() 
This makes PSTR() type safe by using a 1 byte wrapper
structure. Attempts to use the wrong varient of a print function will
generate a compilation error.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1797 f9c3cf11-9bcb-44bc-f272-b75c42450872
 2011-03-21 07:25:48 +00:00
DrZiplok@gmail.com 52a0a03d56 Bring AP_GPS_Auto closer to ready for prime-time: 
- disable NMEA autodetection; false positives are still a risk
 - trim down the console output to a minimum; we still need something to help users diagnose potential problems, but the old output was much too verbose
 - rather than block forever, only do one autodetect pass for each ::read call.  That's still too long (five seconds or so) but better than blocking forever.
 - don't block forever if no GPS is attached.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1480 f9c3cf11-9bcb-44bc-f272-b75c42450872
 2011-01-10 08:20:41 +00:00
DrZiplok@gmail.com 1bfcdaa2cb Add a delay after sending the GPS mode switch strings in an attempt to give any NMEA data time to drain before we attempt to sniff again. 
Otherwise, we can end up settling on NMEA as a mode just after switching a SiRF GPS to binary mode.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1467 f9c3cf11-9bcb-44bc-f272-b75c42450872
 2011-01-10 01:50:42 +00:00
DrZiplok@gmail.com 8da4a29d58 Add support for the DIYD MTK v1.6 firmware 
Nuke AP_GPS_IMU, as nothing is using it anymore.
Simplify the handling of no GPS/no fix detection.
Fix prototypes for ::init and ::read.
Update AP_GPS_Auto and corresponding example, nearly ready for primetime.
Use uint8_t rather than byte.
Strip some _error() calls to save space.  More could still go.



git-svn-id: https://arducopter.googlecode.com/svn/trunk@1246 f9c3cf11-9bcb-44bc-f272-b75c42450872
 2010-12-24 06:35:09 +00:00
james.goppert aa115aea68 AP_GPS libs now recover from disconnect or failed initialization. 
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1188 f9c3cf11-9bcb-44bc-f272-b75c42450872
 2010-12-19 13:24:29 +00:00
DrZiplok@gmail.com ee105a0ebf The previous initialisation strategy for auto-detection doesn't play well with the way APM uses the GPS. 
Switch to subclassing GPS and manipulating a global pointer.  Update the test program so that it works again.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@673 f9c3cf11-9bcb-44bc-f272-b75c42450872
 2010-10-17 07:22:11 +00:00
DrZiplok@gmail.com 0a94520682 Add support for automatically detecting the connected GPS and configuring accordingly. 
Note that this is currently disabled as changes need to be made to APM to support it.

Tested with MTK, u-blox and SiRF GPS'.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@671 f9c3cf11-9bcb-44bc-f272-b75c42450872
 2010-10-17 06:06:04 +00:00