Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
29,332 Commits 70 Branches 507 Tags 662 MiB
Commit Graph

29332 Commits

Author SHA1 Message Date
Daniel Widmann bc7cf97b4e Rover: don't use GPS speed to detect reversing 
instead pass reverse to attitude controller based on desired speed
 2017-11-08 14:37:59 +09:00
Daniel Widmann 49887235df AR_AttitudeControl: get_steering_out methods accept reverse argument 2017-11-08 14:36:23 +09:00
Daniel Widmann ac7e76cc43 Rover: enable pivot turns in auto mode 2017-11-08 14:35:00 +09:00
ravsrivera f7641d7b01 Tools; Added name to Git_Success.txt 2017-11-08 14:24:20 +09:00
uavdlsu 8ba42480f7 Tools: Added Clarisse Crespo to GIT_Success.txt 2017-11-08 14:24:19 +09:00
marcsay 477a0af83c Tools: added name to GIT_Success.txt 2017-11-08 14:24:18 +09:00
Randy Mackay ef05281dc2 Copter: 3.5.4-rc1 release notes 2017-11-08 12:21:46 +09:00
bnsgeyer 63bafa2c7f AP_Motors: Tradheli- fixes servo_test function for Dual Heli frame 2017-11-08 11:07:08 +09:00
Andrew Tridgell 0e71aa6f89 PX4Firmware: submodule update 
auav 2.1 compatibility from Mark
 2017-11-08 12:03:38 +11:00
Michael du Breuil bd32b5deb7 Plane: update isFlying() landing check 
When we are landing a sink_rate < -0.2f means the vehicle is climbing,
which should never happen during an approach for any supported landing
type (slope or deepstall), and on hard impacts with the ground its
common for the vehicle altitude to be projected to low and climb back to
the correct altitude slowly (but at a higher rate). This changes the
check to only consider sinks while on approach as acceptable.
 2017-11-07 08:57:15 +01:00
proficnc 6a94d285de AP_BoardConfig: fixed description to warn against 
setting the wrong heater value in params
 2017-11-07 12:00:32 +11:00
Peter Barker ef00978662 Copter: add missing disarm-on-land parameter to rtl_land_run 
Always disarm
 2017-11-06 22:58:16 +00:00
Peter Barker 5b793252ed Copter: stop disarming as part of running rtl as mission item 
Fixed #6324

Note that the land-as-mission-item code is duplicated from the
rtl-as-mode code but omits the disarm part, so doesn't suffer from the
same bug.
 2017-11-06 19:07:28 +00:00
Tom Pittenger 8029a7f10e
Plane: add Tom Pittenger to developers list 
Plane: add Tom Pittenger to developers list. He was added to main Plane.h as "Lead Developer" here *https://github.com/ArduPilot/ardupilot/blob/master/ArduPlane/Plane.h#L2) but never to the main ArduPilot.c file.
 2017-11-06 13:46:32 +01:00
Andrew Tridgell bf9779b63a autotest: default plane simulator to 'plane' 
this is good enough for most people and avoids an external dependency
 2017-11-06 15:44:26 +11:00
guglie e741cb28d2 fix wait_unlimited with an infinite sleep loop 
this fixes issue #7180
 2017-11-06 13:39:59 +11:00
Michael du Breuil ef0b52e017 AP_Arming: Run extra GPS checks when arming 2017-11-06 01:33:57 +00:00
Michael du Breuil 236e74c529 AP_GPS: Singleton 2017-11-06 01:33:57 +00:00
Michael du Breuil c856cc6f33 AP_GPS: Allow GPS's to run functions on arming (used by SBF) 
Supports starting/stopping GPS logging
 2017-11-06 01:33:57 +00:00
Andrew Tridgell 5843086760 Plane: update release notes for 3.8.3beta4 2017-11-05 21:47:15 +11:00
Andrew Tridgell 957c1f6d23 Plane: extend QLOITER transition pitch limit 
use twice transition time for pitch envelope to reduce QLOITER
transition harshness
 2017-11-05 21:35:32 +11:00
Andrew Tridgell bbf98fae46 Plane: fixed a warning 2017-11-05 21:25:37 +11:00
Andrew Tridgell 9c8cd6c1cc Plane: added Q_TRANS_DECEL 
this gives a deceleration rate for QRTL transition from RTL, and also
for transitions to QLOITER
 2017-11-05 20:44:42 +11:00
Andrew Tridgell e27c54a312 Plane: smooth out fwd tailsitter transition 
use Q_TRANSITION_MS and the transition angle to pitch forward more
slowly
 2017-11-05 17:25:00 +11:00
Andrew Tridgell 21164ef409 Plane: added tailsitter surface speed scaling 
added scaling of control surfaces by throttle when in hover. This helps
the controller remain stable over a wide range of throttle levels, such
as when descending or rapidly climbing
 2017-11-05 17:05:08 +11:00
Andrew Tridgell c9652fec3c AP_BattMonitor: fixed SITL segfault 2017-11-04 19:41:41 +11:00
Andrew Tridgell 274e441292 DataFlash: fixed build for aerofc-v1 2017-11-04 16:53:29 +11:00
Andrew Tridgell 6358081b18 AP_Motors: apply tailsitter min spin to both motors 2017-11-04 11:41:40 +11:00
Michael du Breuil 83decd1370 ArduPlane: Only run is_flying landing checks when in landing stage 2017-11-04 10:07:16 +11:00
Michael du Breuil 338d745de1 AP_Landing: Implement is_on_approach for deepstall 
(Fixes a disarm in flight)
 2017-11-04 10:07:16 +11:00
Andrew Tridgell 126d5ce5d4 Plane: re-implement MIXING_OFFSET 
this was lost in the conversion of SRV_Channels
 2017-11-04 09:34:22 +11:00
Andrew Tridgell 878d2e2563 AP_Motors: fixed tailsitter use of SPIN_MIN 2017-11-04 09:29:08 +11:00
Michael du Breuil e63e39c411 Plane: Don't broadcast PWM value that tripped throttle failsafe 2017-11-02 16:46:08 -07:00
Michael du Breuil d52f5155f0 Plane: Rename rc failsafe state members 2017-11-02 16:46:08 -07:00
alexshirley 8058fdf093 AP_HAL_Linux: combine ppm and sbus on ocpoc_zynq 
Removes compile-time selection of RCInput driver for ocpoc_zynq.
PPM and SBUS input are now colocated on the ocpoc board, and it
only needs to run RCInput_ZYNQ. Pulse input is also inverted
to accommodate SBUS input, which has no effect on PPM input.
 2017-11-01 10:28:40 -07:00
alexshirley 065b00eb81 AP_HAL: Remove SBUS macro from ocpoc target 2017-11-01 10:28:40 -07:00
Randy Mackay 002d3f08f6 AP_L1_Control: update_waypoint zeros xtrack i term on init 2017-11-01 16:46:40 +09:00
Andrew Tridgell eab1d3af4f AP_InertialSensor: don't apply offsets in SITL backend 
the offsets are applied in the rotate and correct methods
 2017-11-01 17:09:21 +11:00
el-shweikh 160ce436e3 Tools: added name to GIT_Success.txt 2017-11-01 14:12:56 +09:00
TsuyoshiKawamura 3467be6695 Tools: update eLAB-445 parameter file 2017-11-01 14:07:43 +09:00
bnsgeyer 37ea64513d AP_Motors: TradHeli - fixed servo test function 2017-11-01 14:01:48 +09:00
Paulo Neves 4108f22304 AP_Beacon: Corrected possible use of nullptr memory. 
The check for UART port pointer is not sufficient
to know if the update() was possible or not. When
MarvelmindHedge construction failed, the hedge pointer
might be a nullptr and there are no checks to avoid
nullptr dereference.

The MarvelmindHedge structure had complex initialization
but was done in a C style, with intermixed initialization functions.
malloc() was changed to cleaner new operator. Given that the
file already contained new operator calls it didn't make
sense to have a mix. The files are cpp so C++ operators
are used.
 2017-11-01 10:49:10 +09:00
nick2204 7d91755bd1 Plane: update Q_OPTIONS docs 
Made q_options description a little clearer
 2017-11-01 09:38:42 +11:00
Andrew Tridgell 1bee1dd210 Plane: log currently used airspeed 
this logs whatever airspeed is being used for flight
 2017-11-01 09:22:15 +11:00
Andrew Tridgell 43ee462813 Plane: prepare for 3.8.3beta2 2017-10-31 18:05:50 +11:00
Andrew Tridgell d55b66efe1 autotest: added HMAS location 2017-10-31 18:02:52 +11:00
Andrew Tridgell f14f40d3ef Plane: fixed GUIDED loiter with Q_RTL_MODE=1 
this was broken by the recent RTL_RADIUS changes

thanks to Nick for noticing this!
 2017-10-31 18:02:31 +11:00
Patrick José Pereira 73a76455d2 AP_BattMonitor: Solve typo in BATT2 description 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2017-10-31 09:32:03 +09:00
Pierre Kancir 4d38eb85a1 APMRover2: Add support of MANUAL_CONTROL msg 2017-10-31 09:31:05 +09:00
Lucas De Marchi cbb9dcc2a1 AP_HAL_Linux: Storage: use define from HAL for directory 2017-10-30 16:57:37 -07:00