rmackay9
68de4e0259
ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing
2012-06-03 17:02:35 +09:00
rmackay9
09695602d2
ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing
2012-06-03 16:59:23 +09:00
Robert Lefebvre
bafb478924
TradHeli: Incorporating Ext ESC Control
2012-05-30 21:50:25 -04:00
Jason Short
abb426aec3
When RTLing, force home as the final location for loiter.
2012-05-30 11:06:41 -07:00
Jason Short
c45209eaff
Broken timer - removed
2012-05-29 12:56:38 -07:00
Jason Short
33d1b5a137
Speed up automatic disarming to 25 seconds for safety.
...
renamed AUTO_ARMING_DELAY to AUTO_DISARMING_DELAY
2012-05-29 12:41:35 -07:00
Jason Short
3ba6e1db7a
Removed references to a takeoff timer
2012-05-29 11:28:40 -07:00
Jason Short
394f8c6eb0
pulling throttle low in flight turns out to be more common than thought. Removed clearing of takeoff_complete flag. This is still cleared during disarm which is automatic after 30 seconds of no throttle.
2012-05-29 11:25:04 -07:00
Jason Short
a3a90287f4
changed the way takeoff complete is figured. Looking for high throttle.
2012-05-29 11:25:04 -07:00
Jason Short
4ed48510dc
reversed circle_WP calculation so the next_WP refers to the destination around the circle and circle_WP refers to the center. The intent is to make it easier to see via ground station.
2012-05-27 09:21:20 -07:00
Jason Short
e2086decc6
Arducopter.pde : setting rtl_approach_alt above 1 would force auto landing even if auto-landing was disabled.
2012-05-23 22:00:56 -07:00
Robert Lefebvre
df4246597f
Updates to CopterLEDS
...
Creation of Nav Blink Function.
2012-05-22 09:58:37 -04:00
Jason Short
99dee97385
Added note
2012-05-21 09:58:23 -07:00
Jason Short
f8ceec2b4b
added check for duplicate time-stamped GPS messages.
2012-05-18 09:54:18 -07:00
Jason Short
be71cbfcc8
Arducopter.pde :
...
removed unneeded d_rate_filters
updated Nav routine to handle faster GPS updates
moved calc_XY_velocity to GPS read
added check for duplicate GPS reads
2012-05-17 11:05:05 -07:00
Jason Short
7278e8d1e5
removed retro loiter code since Angel has a branch now.
...
shrank speed filter to avoid latency
removed unused forward estimator code
placed code for switchover to gps.groundspeed at 1.5m/s
added clamp for D term when below .5m/s to eliminate noise
added hybrid I-term based on speed error and position
changes Loiter D term to use position rather than acceleration to avoid noise
2012-05-15 22:14:23 -07:00
rmackay9
eaeaa3811a
ArduCopter: bug fix for reversing tri servo
...
Extended AP_MotorsTri class to take in pointer to rc_tail servo (rc_7) and we use this servo's REV parameter to determine whether to reverse the output to the tail servo or not
2012-05-13 12:36:46 +09:00
rmackay9
47ea92aa7f
ArduCopter: updated version to 2.5.5
2012-05-13 08:47:43 +09:00
Andrew Tridgell
7866740d62
MAVLink: make ACM build with MAVLink 1.0 possible in arduino GUI
2012-04-24 22:24:58 +10:00
Adam M Rivera
2ee8237b5f
ArduCopter/Navigation: Updated code to reference the new g.retro_loiter param instead of the compile define.
2012-04-23 00:19:18 -05:00
Adam M Rivera
692bbee233
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
2012-04-23 00:03:37 -05:00
Jason Short
2aca6c64ab
Added a union for casting floats to ints and back when storing Floats to the DataFlash
2012-04-21 15:17:09 -07:00
rmackay9
114e6a3551
ArduCopter - combined CH6_DAMP and CH6_STABILIZE_KD tuning parameters to avoid confusion
2012-04-21 23:24:57 +09:00
rmackay9
53ddb58c7b
ArduCopter - changed optflow object to be APM2 version if necessary
2012-04-21 20:15:55 +09:00
Adam M Rivera
edf15c1b9b
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
2012-04-20 11:45:38 -05:00
rmackay9
c323efc2d4
ArduCopter - regressed version back to 2.5.4
2012-04-20 21:58:32 +09:00
Adam M Rivera
d09916422a
Merge branch 'retro-loiter' of https://code.google.com/r/a432511-wip into auto-approach
...
Conflicts:
Tools/ArdupilotMegaPlanner/Common.cs
2012-04-19 11:08:34 -05:00
Adam M Rivera
9181eedf5a
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into retro-loiter
2012-04-19 10:17:36 -05:00
Adam M Rivera
ad13854ab7
Loiter: Made the "retro loiter" routines configurable. Add RETRO_LOITER_MODE ENABLED to APM_Config.h to enable the older loiter shtuff.
2012-04-19 10:16:29 -05:00
Adam M Rivera
3995381800
Arducopter.pde: Moved gps to 10hz. Changed calc_XY_velocity to calc_GPS_velocity.
2012-04-18 23:07:35 -05:00
Adam M Rivera
baf8218b58
ArduCopter: Added code to prevent mode from switching to APPROACH on every loiter.
2012-04-16 16:29:54 -05:00
Adam M Rivera
b891622210
ArduCopter: Changed millis compare to use new config value for approach delay.
2012-04-16 14:04:30 -05:00
Adam M Rivera
8128fb2d5f
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
...
Conflicts:
ArduCopter/Parameters.h
2012-04-16 10:23:01 -05:00
Adam M Rivera
637f778dd0
ArduCopter: Updated param name from auto_land_timer to loiter_timer, because it could really be used for more routines like auto-approach. Added timer before approach (20s).
2012-04-16 10:07:57 -05:00
rmackay9
4dadd888d8
ArduCopter - CH6 Tuning - added AHRS_YAW_KP parameter as 30. Now you can easily set the amount that the mag is used to correct the gyro based yaw estimate in the DCM
2012-04-16 23:47:57 +09:00
Adam M Rivera
f27b5d538b
ArduCopter, commands_logic: Updated logic to allow as low as 5m.
2012-04-15 19:50:05 -05:00
Adam M Rivera
e4940ec3bb
ArduCopter: Added check to make sure user defined approach alt is at least 5.
2012-04-15 16:58:22 -05:00
Adam M Rivera
d1a7fdb9ef
ArduCopter: Added check to g.rtl_approach_alt, which if greater than zero will initiate an approach to the target alt rather than land.
2012-04-15 16:54:43 -05:00
rmackay9
ccb21613b5
ArduCopter - updated firmware version to "2.6 Beta"
2012-04-14 14:26:44 +09:00
rmackay9
33bd558a94
ArduCopter - LEDS - main code to support COPTER_LEDS.
...
Code by Robert Lefebvre
2012-04-12 22:55:44 +09:00
rmackay9
544237d60a
ArduCopter - add includes for new AP_Motors classes.
...
Remove global motor_filtered and motor_out arrays.
Removed all global heli variables.
replace "motor_armed" with "motors.armed()"
removed output to rc_4 for tri because this is now handled by AP_MotorsTri class
2012-04-04 22:50:43 +09:00
Andrew Tridgell
40d7b07789
MAVLink: port the new adaptive flow control to ArduCopter
...
This allows for arbitrary stream rates, and supports flow control if
you are using a 3DR radio
2012-04-02 11:18:53 +10:00
rmackay9
b0c9a25024
ArduCopter - CH6 tuning - changed Roll/Pitch Rate D tuning to use the user supplied tuning range instead of the range / 100.
...
also changed heli_ext_gyro_gain to make it use the tuning range directly.
2012-03-31 09:28:25 +09:00
Andrew Tridgell
58f539ca35
ACM: removed FORCE_AUTOMATIC_DECLINATION_UPDATE
...
we now have the EEPROM option COMPASS_AUTODEC instead
2012-03-30 14:25:27 +11:00
Adam M Rivera
0727955fe3
ArduCopter: Changed implementation of configuration value for automatic declination. There is now a FORCE_AUTOMATIC_DECLINATION_UPDATE that when enabled will update the declination on every GPS 3D fix regardless of whether or not the user saved a value to the EEPROM. By default the declination will only be set by the automatic declination routine if the user has not saved a declination to the EEPROM.
2012-03-30 14:25:06 +11:00
rmackay9
a12a7a7d87
ArduCopter - added CH6_STABILIZE_KD tuning value
2012-03-29 21:09:41 +09:00
rmackay9
2cc87af180
Added multiple new tuning parameters to the inflight channel 6 tuning feature:
...
#define CH6_YAW_KI 24
#define CH6_ACRO_KP 25
#define CH6_YAW_RATE_KD 26
#define CH6_LOITER_KI 27
#define CH6_LOITER_RATE_KI 28
2012-03-28 23:58:58 +09:00
Andrew Tridgell
4821eb4807
ACM: enable the new compass offset nulling in ACM
2012-03-27 15:37:24 +11:00
rmackay9
eb55234809
ArduCopter - updated firmware version to 2.5.3
2012-03-25 09:13:51 +09:00
rmackay9
1f253c5217
ArduCopter - altitude hold - ensure throttle_avg is initialised from g.throttle_cruise parameter
2012-03-23 23:48:24 +09:00