Andrew Tridgell
bf1f27af32
SITL: added is_lock_step_scheduled() API
...
used to fix panic on bad timing
2021-05-24 20:13:37 +10:00
Andy Piper
15fe14289d
SITL: add SIM_ESC_TELEM
2021-05-12 17:01:11 +10:00
Iampete1
0c3aa72158
SITL: add direct actuated wing to sailboat sim
2021-04-28 08:22:47 +01:00
Philippe Hamelin
187549b431
SITL: Add NMEA THS message.
2021-04-14 17:20:28 +10:00
Patrick José Pereira
07c3435f9d
SITL: Add missing const in member functions
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Andrew Tridgell
7292b4f260
SITL: added SIM_ACC_TRIM_{X,Y,Z} for simulating IMU trim
...
this will enable an autotest for AHRS trim
2021-01-25 16:24:50 +11:00
Andrew Tridgell
9febcc0f98
SITL: added accel scaling parameters
2021-01-21 13:09:21 +11:00
Andrew Tridgell
b5089580a9
SITL: cleanup IMU parameters
...
allow for biases per IMU
2021-01-21 13:09:21 +11:00
Andrew Tridgell
c0ba7c29ca
SITL: use TCal class for temp adjustment in SITL
2021-01-21 13:09:21 +11:00
Pierre Kancir
c1f1208c89
SITL: add support for SIM_STATE msg
2021-01-19 10:40:43 +11:00
Peter Barker
b5316c3b52
SITL: stash pressure in sitl_fdm structure
...
It's not a great way of getting the data where needed - but it is
something.
2020-12-22 23:07:24 +11:00
Andrew Tridgell
b7f68e87b4
SITL: added barometer wind coefficients
2020-12-11 15:21:41 +11:00
Andrew Tridgell
3456bdb4eb
SITL: added a separate param class for SITL baro params
...
makes it easier to add more
2020-12-11 15:21:41 +11:00
Peter Barker
f7b2856af0
SITL: add simulator for IntelligentEnergy 2.4kWh
...
SITL: Added setup note to comment
SITL: IE24: Add Error param and cycle battery pwr
2020-11-24 12:54:52 +11:00
Michael du Breuil
892fb74c96
SITL: Add parameters for SFML_Joystick
2020-11-13 15:38:22 +11:00
Andrew Tridgell
e07cecb264
SITL: added support for simulated battery discharge
2020-10-28 14:20:44 +11:00
Andrew Tridgell
a0bc9d3148
SITL: fixed quadplane mass and rpm indexing
2020-10-28 14:20:44 +11:00
Iampete1
2764126a1c
SITL: add apparent wind sensor support
2020-09-09 18:26:54 +10:00
Andrew Tridgell
bf9c76a5c3
SITL: added SIM_MAGn_FAIL parameters
2020-09-08 11:01:14 +10:00
Samuel Tabor
21a8471d2d
SITL: Add start time argument.
2020-09-07 21:20:25 +10:00
Andrew Tridgell
c16467a47f
SITL: added SIM_IMU_COUNT
2020-08-28 10:17:00 +10:00
Harshit Kumar Sankhla
8507c7d3b9
SITL: add some airspeed, baro, gps noise simulation parameters
...
also some rearrangements in the parameter
lists to make things look better
2020-08-27 20:20:51 +10:00
Andrew Tridgell
91b4830801
SITL: added SIM_GPS_ACC parameters
2020-08-25 10:22:05 +10:00
Iampete1
537eec9091
SITL: add rangefinder support
2020-08-05 18:24:36 +10:00
Peter Barker
80d7a4ee5e
SITL: simulated i2c support
2020-08-04 21:40:21 +10:00
Mark Whitehorn
f9e129e617
SITL: read 12 flightaxis input channels
2020-07-27 12:02:53 +10:00
Andrew Tridgell
a6df0745a6
SITL: make all GPS params available for both GPS
2020-07-10 13:28:38 +10:00
Andrew Tridgell
f9f8822e47
SITL: added ship takeoff/landing simulation
...
this allows for a ship with a given radius and speed, allowing for
testing of ship takeoff and landing systems
2020-07-10 13:28:38 +10:00
Andrew Tridgell
925b44dee5
SITL: split out GPS and MAG parameters into their own tables
...
this creates space for new parameter trees
2020-07-10 13:28:38 +10:00
Harshit Kumar Sankhla
33ac9efe17
SITL: add parameters for 2nd baro
2020-07-08 16:25:31 +10:00
Peter Barker
88c8dd8465
SITL: add RichenPower generator simulator
2020-07-03 08:21:42 +09:00
bugobliterator
95493e4569
SITL: add support for per mag calibration
2020-06-05 09:38:40 +10:00
Andrew Tridgell
e4596efe9b
SITL: added SIM_RATE_HZ
...
this allows the physics step size to be changed while flying the
internal models, which allows for lower CPU usage
2020-06-03 18:11:06 +10:00
Randy Mackay
c8f6cb233b
SITL: vicon supports sending vision-speed-estimate
...
SIM_VICON_TMASK controls which of the 3 supported messages are sent
SIM_VICON_VGLI_X/Y/Z allows introducing a velocity glitch
2020-06-02 08:33:42 +09:00
Randy Mackay
366d03a533
SITL: add VICON_YAWERR
...
this allows simulating an error in the camera's reported yaw
2020-05-15 09:22:07 +10:00
Randy Mackay
bf9ee4ada8
SITL: remove unused MAG_ERROR and VICON_HSTLEN params
2020-05-15 09:22:07 +10:00
Randy Mackay
d8bc197d35
SITL: add VICON_GLIT_XYZ, FAIL and YAW
...
glitches are in meters in vicon's frame
fail disables sending of vision-position-estimate messages
yaw is the vicon's heading in degrees. i.e. if vicon's "forward" is
pointing to the east, yaw should be set to 90
2020-04-28 12:31:14 +09:00
Mark Whitehorn
db1c7d9bdd
SITL: add support for AHRS_ORIENTATION=ROTATION_CUSTOM
2020-04-28 10:57:26 +10:00
Willian Galvani
cf6f5502a4
SITL: Make Sub buoyancy a parameter
2020-04-27 12:48:52 -07:00
Randy Mackay
3ccb3c69a6
SITL: add vicon position offsets
2020-04-14 10:28:03 +10:00
Andrew Tridgell
778532d556
SITL: added SIM_GPS2_HDG and rationalise the GPS position variables
2020-04-11 21:14:31 +10:00
Samuel Tabor
5082c9be8b
SITL: Add plane-soaring type, including parameters, mission, simulated thermals and glider sim settings.
2020-04-08 09:11:54 +10:00
Andrew Tridgell
09b272b840
SITL: added SIM_LED_LAYOUT parameter
...
for layout of simulated LEDs
2020-02-27 13:12:26 +11:00
Andy Piper
2033cf3b4a
SITL: add SIM_VIB_MOT_MULT to allow motor noise to have a different amplitude to the fixed frequency noise
2020-02-22 11:15:37 +11:00
Siddharth Purohit
8a7dcafa0f
SITL: add parameter MAG_DEVID in SITL
2020-02-19 13:59:53 +09:00
Andrew Tridgell
fb3496b63b
SITL: added SIM_GPS2_POS
...
and re-arrange two sets of GPS parameters to be arrays
2020-01-26 16:55:17 +11:00
Andy Piper
a6a020b3c7
SITL: record throttle value instead of motors on/off
2019-12-31 10:34:02 +11:00
Andy Piper
c807267bab
SITL: add rpm-based motor noise per-motor to gyros and accels
...
convert multicopter thrust to rpm per motor
2019-12-17 10:07:06 +11:00
Andrew Tridgell
7b203f6816
SITL: added SIM_MAG_SCALING for testing scale factor errors
2019-12-03 20:48:23 +11:00
Peter Barker
326ba5b974
SITL: support for virtual hardware safety switch
2019-11-26 10:14:11 +11:00