Andrew Tridgell
bf2cf7834d
HAL_ChibiOS: fixed a bug in parity/stop-bit setting on STM32F7 and H7
...
and add get_options() method
2019-09-06 08:51:45 +10:00
Andrew Tridgell
d1565a96c5
HAL_ChibiOS: wrap cacheBuffer functions
...
needed to avoid problem with end() method in UARTDriver shadowing with
F7 implementation of cache macros
2019-08-27 15:40:43 +10:00
Andrew Tridgell
16bdaaa1af
HAL_ChibiOS: added support for STM31F10x for AP_Periph
2019-08-27 10:29:56 +10:00
Andrew Tridgell
8080efbc6a
HAL_ChibiOS: allow for blocking unbuffered uarts
...
this is used by AP_IOMCU to avoid a race condition where the mutex is
busy on write() causing a zero-length write and delayed output
2019-08-17 17:36:41 +10:00
Andrew Tridgell
afc8a70ce4
HAL_ChibiOS: fixed a bug in wait_timeout() on UARTs
...
wait_timeout() could return true on a read of less bytes than are
expected.
2019-08-17 17:36:41 +10:00
Siddharth Purohit
2f0d1336e6
HAL_ChibiOS: add support for dual usd cdc
2019-07-12 17:01:21 +10:00
Andrew Tridgell
7e1048c89b
HAL_ChibiOS: enable UART inversion on H7
2019-03-01 11:39:27 +11:00
Andrew Tridgell
64681cb05c
HAL_ChibiOS: allocate threads from any heap
...
this fixes a failure on MatekF405-Wing where it fails to allocate the
SPI thread for the IMU
2019-02-27 11:54:28 +11:00
Andrew Tridgell
dad1774330
HAL_ChibiOS: fixed channel selection for F4/F7 uart driver
2019-02-26 16:18:26 +11:00
Andrew Tridgell
9647a68c9e
HAL_ChibiOS: fixed UART RX DMA for H7
2019-02-26 16:18:26 +11:00
Andrew Tridgell
231117e9b1
HAL_ChibiOS: invalidate before read on rx, not on DMA setup
...
more efficient, as we only invalidate what was used
2019-02-26 16:18:26 +11:00
Andrew Tridgell
071d5e01af
HAL_ChibiOS: added DMAMUX channel assignment calls
2019-02-26 16:18:26 +11:00
Andrew Tridgell
f4e31ce65b
HAL_ChibiOS: added more cache flush ops
2019-02-26 16:18:26 +11:00
Andrew Tridgell
dd8115c9b4
HAL_ChibiOS: check for already allocated TX dma in UART driver
2019-02-26 16:18:26 +11:00
Andrew Tridgell
d9c888ab45
HAL_ChibiOS: port SPI, I2C and UART drivers to H7
2019-02-26 16:18:26 +11:00
Andrew Tridgell
bbd25350eb
HAL_ChibiOS: support ChibiOS kernel major 6
...
preparing for STM32H7 support
2019-02-26 16:18:26 +11:00
Siddharth Purohit
b5fbdc9888
HAL_ChibiOS: invoke serial data event signal for non dma ports as well
2019-01-23 15:57:05 +11:00
Andrew Tridgell
8c43db1a00
HAL_ChibiOS: implement half-duplex delay and read locking
2018-12-29 15:58:22 +11:00
Andrew Tridgell
013f1d55e8
HAL_ChibiOS: added support for swapping UART pins
2018-11-20 18:25:35 +11:00
Andrew Tridgell
d84bc9f556
HAL_ChibiOS: fixed STM32F7 RXINV flag
2018-11-16 15:48:21 +11:00
Andrew Tridgell
85243ad522
HAL_ChibiOS: enable support for half-duplex uart config
2018-11-14 19:05:09 +11:00
Andrew Tridgell
acf03980ca
HAL_ChibiOS: added UART inversion options
...
support GPIO pins or STM32F7
2018-11-14 19:05:09 +11:00
Andrew Tridgell
8c962e6f0f
HAL_ChibiOS: use a larger TX buffer on USB
...
this is needed for fast log download on vehicles with 50Hz main loop
2018-08-28 08:50:50 +10:00
Francisco Ferreira
1b46104a98
AP_HAL_ChibiOS: fix warning when STDOUT is defined
...
../../libraries/AP_HAL_ChibiOS/UARTDriver.cpp:118:12: warning: 'int hal_console_vprintf(const char*, va_list)' defined but not used [-Wunused-function]
static int hal_console_vprintf(const char *fmt, va_list arg)
^
2018-08-14 10:17:38 +10:00
Andrew Tridgell
7aba99e229
HAL_ChibiOS: fixes for ChibiOS version update
2018-08-03 13:44:59 +10:00
Siddharth Purohit
395c48933c
HAL_ChibiOS: move tto using updated time conversion API
2018-08-03 13:44:59 +10:00
Andrew Tridgell
44fd85ff29
HAL_ChibiOS: reduce memory used by serial buffers
...
this does not appear to affect log download speed. It saves about 27k
of memory
2018-08-01 13:11:16 +10:00
Andrew Tridgell
83f38d536e
HAL_ChibiOS: fixed flow control auto-detect without DMA
...
this fixes automatic flow control detection when we are not using DMA
for TX
2018-07-13 07:34:30 +10:00
Andrew Tridgell
50f7e55f0b
HAL_ChibiOS: don't clear buffers if no baudrate change
2018-07-12 11:41:31 +10:00
Michael du Breuil
153ee6ca8e
AP_HAL_ChibiOS: Clear UART buffers when opening a port
2018-06-26 02:18:18 +01:00
Michael du Breuil
037e53ba8a
AP_HAL_ChibiOS: Reduce flash space of UARTDriver
...
Saves 32 bytes
2018-06-26 02:18:18 +01:00
Andrew Tridgell
369ac5edd0
HAL_ChibiOS: save more space in the bootloader
2018-06-25 21:22:31 +10:00
Andrew Tridgell
e3b68876a9
HAL_ChibiOS: fixed tx_len on tx DMA timeout
2018-06-19 09:08:45 +10:00
Andrew Tridgell
8431a677d9
HAL_ChibiOS: added a timeout to DMA UART TX
...
this prevents a shared DMA channel being held for a long time if a CTS
pin is held either by not being connected or by a radio
2018-06-19 09:08:45 +10:00
Andrew Tridgell
2493cdbcb6
HAL_ChibiOS: switch to new bouncebuffer system
...
this removes the dma_flush and dma_invalidate methods and uses a
common bouncebuffer system for all CPU types. This enables microSD
support on STM32F7
2018-06-06 07:15:41 +10:00
Andrew Tridgell
0fade4eb9e
HAL_ChibiOS: make sure the UART bounce buffers are DMA safe
2018-06-06 07:15:41 +10:00
Andrew Tridgell
edb831653f
HAL_ChibiOS: added dma_flush and dma_invalidate operations
...
these are needed to manage the data cache on the STM32F7
2018-06-06 07:15:41 +10:00
Andrew Tridgell
7b720aae46
HAL_ChibiOS: allow printf() to work on systems without debug console
...
map to hal.console once initialised
2018-05-26 19:06:25 +10:00
Andrew Tridgell
89898bae1d
HAL_ChibiOS: take account of available bytes in receive_time_constraint_us
2018-05-21 14:53:18 +10:00
Andrew Tridgell
7005383f82
HAL_ChibiOS: implement uart receive timestamp API
2018-05-16 18:49:22 +10:00
mirkix
cb50639e27
AP_HAL_ChibiOS: add STM32F7 UART support
2018-05-15 07:23:56 +10:00
Andrew Tridgell
5854ccbb4c
HAL_ChibiOS: removed stray debug code
...
thanks to @alielectric for noticing
2018-05-03 17:04:14 +10:00
Andrew Tridgell
e4ce2f532b
HAL_ChibiOS: make smaller builds possible
...
this allows for much smaller builds when you disable a lot of
options. This is part of an effort to create a bootloader of less than
16k using ChibiOS
2018-04-12 11:50:44 +10:00
Andrew Tridgell
e448b5d069
HAL_ChibiOS: implement UART port locking
2018-04-07 09:10:29 +10:00
Andrew Tridgell
bc32276966
HAL_ChibiOS: support DShot output
...
use DMAR burst DMA to minimise number of DMA channels needed
thanks to betaflight for the great reference implementation!
2018-04-07 09:10:29 +10:00
Andrew Tridgell
a64819cbf2
HAL_ChibiOS: minimise DMA TX latency on contended UARTs
...
try to prevent long delays on other users of a DMA channel
2018-04-07 09:10:29 +10:00
Andrew Tridgell
556f3ba53f
HAL_ChibiOS: make UARTs non-blocking by default
...
we never want blocking ports any more with ArduPilot, so defaulting to
blocking makes no sense
2018-03-02 21:39:38 +11:00
Andrew Tridgell
91c741ef07
HAL_ChibiOS: use a non-blocking lock for UART shared DMA
...
we can have multiple UARTs on the same thread sharing the same DMA TX
channel. That can lead to deadlock with blocking locks on DMA. This
makes UART requests for DMA locks non-blocking to fix the issue
2018-03-02 21:39:38 +11:00
Andrew Tridgell
306d35655e
HAL_ChibiOS: allow for bare board builds
...
this allows for a build with no UARTs, no SPI, no I2C, no PWM. Great
for initial board bringup with just USB
2018-03-02 12:52:50 +11:00
Andrew Tridgell
d0eb2970c7
HAL_ChibiOS: ensure RTS and CTS are both disabled for no flow control
2018-02-07 20:33:45 +11:00
Andrew Tridgell
82f1f462ae
HAL_ChibiOS: ensure we don't init a uart driver twice
2018-02-07 20:33:45 +11:00
Andrew Tridgell
41758348e5
HAL_ChibiOS: added checking of lock state in shared_dma
...
and use lock around check for tx completion in UART handler
2018-02-07 20:33:45 +11:00
Andrew Tridgell
dce4c90467
HAL_ChibiOS: moved UART thread to UART driver
...
use an event model for triggering sends from tx complete DMA handler
for unbuffered uarts
2018-02-07 20:33:45 +11:00
Andrew Tridgell
4d018cf5e2
HAL_ChibiOS: take lock on DMA allocate/deallocate
...
this is required for the stm32_dma_stream bitmask manipulation
2018-02-07 20:33:45 +11:00
Andrew Tridgell
e002fbdb8d
HAL_ChibiOS: fixed a build warning
2018-02-07 20:33:45 +11:00
Andrew Tridgell
85acbcb21d
HAL_ChibiOS: fixed UART send from TX complete IRQ
2018-02-07 20:33:45 +11:00
Andrew Tridgell
979a2a4796
HAL_ChibiOS: removed debug code
2018-02-07 20:33:45 +11:00
Siddharth Purohit
538af2a58a
HAL_ChibiOS: fix parity and stop bit setting
2018-02-07 20:33:45 +11:00
Siddharth Purohit
df4bf7e476
HAL_ChibiOS: fix irq clash with unnecessary access to readbuf ring buffer
2018-02-07 20:33:45 +11:00
Siddharth Purohit
02696882e9
HAL_ChibiOS: if unbuffered write, do continue to invoke DMA writes
...
adds higher latency to device sharing DMA
2018-02-07 20:33:45 +11:00
Andrew Tridgell
3dacbd1b36
HAL_ChibiOS: hold write lock for unbuffered writes
2018-02-07 20:33:45 +11:00
Andrew Tridgell
ad26ca4a27
HAL_ChibiOS: implement parity and stop bits controls
2018-02-07 20:33:45 +11:00
Andrew Tridgell
2e15285c51
HAL_ChibiOS: refuse unbuffered writes without DMA
...
we would need much more complex code to handle this
2018-02-07 20:33:45 +11:00
Andrew Tridgell
3f2cc2c9d6
HAL_ChibiOS: implement low latency UART writes
...
this implements the set_unbuffered_writes() API by performing writes
directly in the write() call and not from a timer
2018-02-07 20:33:45 +11:00
Andrew Tridgell
f14a847b97
HAL_ChibiOS: rename classes to remove 'Chibi'
...
it is redundent as all classes are in ChibiOS namespace, and makes the
code harder to read
2018-01-15 11:46:02 +11:00
Andrew Tridgell
d1f93cd66c
HAL_Chibios: auto-generate I2C, SPI and UART device lists
...
this is less error prone and make a port faster as more information is
in hwdef.dat
2018-01-15 11:46:02 +11:00
Andrew Tridgell
280140bf25
HAL_ChibiOS: added support for MindPX-v2
2018-01-15 11:46:02 +11:00
Andrew Tridgell
41be81af34
HAL_Chibios: added hardware flow control for UARTs
...
implement RTS in software and CTS in hardware
2018-01-15 11:46:02 +11:00
Andrew Tridgell
c3435e45c5
HAL_ChibiOS: initial port to FMUv4
2018-01-15 11:46:02 +11:00
Andrew Tridgell
8b6bab7b17
HAL_Chibios: added ChibiOS HAL
...
this is based on initial work by Sid, reset here for easier merging
2018-01-15 11:46:02 +11:00