Commit Graph

10733 Commits

Author SHA1 Message Date
Leonard Hall b7fe6aa16e AP_MotorsMulticopter: remove update_max_throttle 2016-04-01 11:59:30 +09:00
Leonard Hall be64c71065 AP_MotorsMulticopter: add get_current_limit_max_throttle
returns the current limited maximum throttle as a number between 0 ~ 1 in the range throttle_min to throttle_max
2016-04-01 11:59:30 +09:00
Leonard Hall 64ba45a683 AP_MotorsMulticopter: add spin_when_armed_low_end_pct
returns the spin-when-armed value as a number from 0 to 1 in the range 0 to throttle_min
2016-04-01 11:59:30 +09:00
Leonard Hall 49819d822f AP_MotorsMulticopter: add get_hover_throttle_as_high_end_pct
Returns hover throttle as a number from 0 to 1 in the range from throttle_min to throttle_max
2016-04-01 11:59:30 +09:00
Leonard Hall e625c105a4 AP_MotorsMulticopter: remove get_throttle_warn 2016-04-01 11:59:30 +09:00
Leonard Hall 3854f2eda7 AP_MotorsMulticopter: rename _throttle_thr_mix_desired to _throttle_rpy_mix_desired
No functional change
Also rename _throttle_thr_mix to _throttle_rpy_mix
2016-04-01 11:59:30 +09:00
Leonard Hall 65bbc23a08 AP_MotorsMulticopter: apply_thrust_curve_and_volt_scaling in 0 to 1 range
existing equivalent pwm function becomes apply_thrust_curve_and_volt_scaling_pwm
2016-04-01 11:59:30 +09:00
Leonard Hall cb39f8aab7 AP_MotorsMuticopter: calc_thrust_to_pwm converts thrust in 0 to 1 range to pwm
pwm output is always between throttle min and throttle max
2016-04-01 11:59:30 +09:00
Leonard Hall 80ddce103f AP_Motors: move set_throttle_filter_cutoff declaration
No functional change
2016-04-01 11:59:30 +09:00
Leonard Hall 649a8c461d AP_Motors: remove unused throttle_radio_min, max
Moved to AP_MotorsMulticopter
2016-04-01 11:59:30 +09:00
Leonard Hall e84011603c AP_Motors: remove unused throttle_pwm_scalar, rpy_pwm_scalar 2016-04-01 11:59:30 +09:00
Leonard Hall 8e1351e474 AP_Motors: init member to resolve compiler warning 2016-04-01 11:59:30 +09:00
Leonard Hall ed51c7a28d AP_Motors: replace throttle_control_input with throttle_in
throttle_control_input was 0 to 1000 range, throttle_in is 0 to 1
2016-04-01 11:59:30 +09:00
Leonard Hall c96b91efb6 AP_Motors: add output_to_motors 2016-04-01 11:59:30 +09:00
Leonard Hall ac579685df AP_Motors: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 666a92ae2f AP_Motors: set_throttle accepts 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 3c74b4cc69 Motors: add get_roll_thrust which returns roll input in range 0 to 1
Also added get_pitch_thrust, get_yaw_thrust
2016-04-01 11:59:30 +09:00
Lucas De Marchi f304fcf4da AP_InertialSensor: examples: add coding style fixes
Several coding style problems were already fixed by previous commit,
just finish the cleanup on this example:

  - replace tabs with spaces
  - remove unneeded \r
  - remove extra spaces
2016-03-31 14:54:17 -03:00
AndersonRayner 10e7d43007 AP_InertialSensor: Add output of all IMUs to example 2016-03-31 14:54:17 -03:00
Lucas De Marchi a502c0924c GCS_MAVLink: simplify sanity check 2016-03-30 01:32:45 -03:00
Francisco Ferreira d3e149e5d7 GCS_MAVLink: ignore Clang out-of-range warning
warning: comparison of constant 4 with expression of type 'mavlink_channel_t' is always false [-Wtautological-constant-out-of-range-compare]
    if (chan >= MAVLINK_COMM_NUM_BUFFERS) {
        ~~~~ ^  ~~~~~~~~~~~~~~~~~~~~~~~~
2016-03-30 01:32:45 -03:00
Marc MERLIN 5bcd1b02ef RSSI channel is not limited to 5-8.
Fix doc per my request on https://github.com/ArduPilot/ardupilot/issues/3280
2016-03-29 08:16:42 -07:00
Tom Pittenger 6718241dad cleanup comments 2016-03-29 05:32:28 -07:00
Andrew Tridgell 894e07a0bd AP_Parachute: added CHUTE_DELAY_MS parameter
on fixed wing it may take quite some time for the propeller to stop
2016-03-29 05:48:40 +11:00
Andrew Tridgell 73a2c99d56 SITL: limit rotational rate to 2000dps 2016-03-26 14:23:05 +11:00
Andrew Tridgell 4d01cb1716 HAL_SITL: fixed SITL engine mul error
expression without get() was treated as int
2016-03-26 14:17:12 +11:00
Andrew Tridgell b4c6a0e30e AP_TECS: added logging of speed_weight and state flags 2016-03-26 08:41:09 +11:00
Andrew Tridgell 8ff932b61c AP_TECS: allow underspeed to end faster
we now can exit an underspeed condition if we stay above min speed for
3 seconds and also reach 15% above min speed. This prevents a problem
with the thrust line causing downpitch leading to a crash due to too
much throttle
2016-03-26 07:44:22 +11:00
Andrew Tridgell 1ecfa6b487 RC_Channel: fixed example in SITL 2016-03-25 21:35:33 +11:00
Andrew Tridgell 5c92adddf9 HAL_SITL: allow examples to run under SITL 2016-03-25 21:35:16 +11:00
Andrew Tridgell 1e4fe7996e HAL_Linux: update URL 2016-03-25 20:47:53 +11:00
Andrew Tridgell 9737050a23 HAL_FLYMAPLE: update URL 2016-03-25 20:47:44 +11:00
Andrew Tridgell 664d91802e HAL_AVR: update URL 2016-03-25 20:47:35 +11:00
Andrew Tridgell 075dd49afe DataFlash: added Log_Write_Rate()
needed for quadplane as well as copter so should be in common code
2016-03-25 12:13:58 +11:00
Andrew Tridgell ab07781c66 APM_Control: raise default P and I gains, and set a lower limit on I for pitch
Too many users have very low I gains, which causes a lot of problems for TECS
2016-03-25 09:54:53 +11:00
Lucas De Marchi 46936767c1 AP_Compass: LSM303D: check for overruns in compass values 2016-03-23 17:50:38 -03:00
Lucas De Marchi cf2d866d51 AP_Compass: LSM303D: used AP_HAL::Device interface
Initialization was also changed a little bit so we don't try to
initialize 25 times. We rather use the same methods as in the
AP_InertialSensor drivers.

Also move up the call to is_zero() in read_raw so we don't set
_mag_[x|y|z] in case of failure.
2016-03-23 17:50:38 -03:00
Lucas De Marchi 5164fbb81b AP_Compass: LSM303D: cleanup driver
Make it similar to other compass drivers, including method names.
2016-03-23 17:50:38 -03:00
Lucas De Marchi 20a4a42cb3 AP_Compass: don't store raw and unfiltered fields
These are not used. The only place where raw fields are used are in the
compass calibrator and we don't need to store them.

Additionally remove duplicated documentation about the meaning of the
functions to avoid them getting out of sync.
2016-03-23 17:50:38 -03:00
Lucas De Marchi e6059f5197 AP_Compass: rename files to follow other libraries
AP_Compass.h is the main header to be exported and AP_Compass.cpp its
implementation. There's no need for an additional header.
2016-03-23 17:50:38 -03:00
Lucas De Marchi 286697b844 AP_Compass: don't rebuild tree when single driver changes
Let the drivers be internal to the library so we don't need to rebuild
the entire tree when a single driver changes.
2016-03-23 17:50:38 -03:00
Lucas De Marchi d3831dbb98 AP_Compass: AK8963: use AP_HAL::I2CDevice abstraction
We still need the BusDriver (in some places called SerialBus) interface
since this driver can also be used on an AuxiliaryBus and that has a
different interface.
2016-03-23 17:50:38 -03:00
Lucas De Marchi 41c1209169 AP_Compass: HMC5843: improve readability
- Capitalize and rename constants
 - Make clear what gain is applied in calibration and what is the
   "normal" gain
 - Make the separation between HMC5883L and HMC5843 explicit when it
   makes sense to improve readability
 - Remove spurious delay in calibrate function
2016-03-23 17:50:38 -03:00
Lucas De Marchi 0291ad869b AP_Compass: HMC5843: use AP_HAL::I2CDevice abstraction
We still need the BusDriver (in some places called SerialBus) interface
since this driver can also be used on an AuxiliaryBus and that has a
different interface.

Besides the usual conversion some more improvements:

  - Use generic function to convert endianness
  - Minor cleanups
  - Reorder per-board ifdefs in compass instantiation: distinguish when
    there's a default compass to when it should probe other compasses
2016-03-23 17:50:38 -03:00
Lucas De Marchi 57f8db5672 AP_HAL: sparse-endian: conditionally include byteswap header
This is not present in qurt.
2016-03-23 17:50:38 -03:00
Lucas De Marchi c5dc54dac7 AP_HAL: utility: import sparse-endian header 2016-03-23 17:50:38 -03:00
Lucas De Marchi 0ed3a93142 AP_HAL: define compass locations for linux boards 2016-03-23 17:50:38 -03:00
ashwinvasudevan e33812e1cb AP_InertialSensor: added missing brackets 2016-03-23 17:46:41 +09:00
Lucas De Marchi 72b246e52c AP_HAL_Linux: fix use of 0-length array
0-length arrays are supported in C but forbidden in C++. GCC allows it
but clang is more strict:

../../libraries/AP_HAL_Linux/SPIDriver.cpp:75:35: fatal error: no matching constructor for initialization of 'Linux::SPIDeviceDriver [0]'
SPIDeviceDriver SPIDeviceManager::_device[0];
                                  ^
../../libraries/AP_HAL_Linux/SPIDriver.h:20:7: note: candidate constructor (the implicit move constructor) not viable: requires 1 argument, but 0 were provided
class SPIDeviceDriver : public AP_HAL::SPIDeviceDriver {
      ^
../../libraries/AP_HAL_Linux/SPIDriver.h:20:7: note: candidate constructor (the implicit copy constructor) not viable: requires 1 argument, but 0 were provided
../../libraries/AP_HAL_Linux/SPIDriver.h:25:5: note: candidate constructor not viable: requires 9 arguments, but 0 were provided
    SPIDeviceDriver(const char *name, uint16_t bus, uint16_t subdev, enum AP_HAL::SPIDeviceType type, uint8_t mode, uint8_t bitsPerWord, int16_t cs_pin, uint32_t lowspeed, uint32_t highspeed);
    ^
1 error generated.
2016-03-20 00:17:02 -03:00
Andrew Tridgell da2a71a3de AP_BoardConfig: raise uavcan startup delay to 2s 2016-03-19 21:18:05 +11:00