Commit Graph

9 Commits

Author SHA1 Message Date
Andrew Tridgell 32d997b95f modify the compass code for AP_Param 2012-02-13 16:22:51 +11:00
Doug Weibel 622217357c Bug fix for compass.
This is a fix for an interesting bug when a DCM matrix reset was added to the ground start.  This bug only showed up if (A) a ground start were performed after an air start or due to use of the "Calibrate Gryo" action, (B) if the current orientation were sufficiently different from 0/0/0, and (C.) if the particular magnetometer had sufficiently large offsets.  Why did resetting the DCM matrix to 0/0/0 pitch/roll/yaw at ground start cause a bug?  The magnetometer offset nulling determines the proper offsets for the magnetometer by comparing the observed change in the magnetic field vector with the expected change due to rotation as calculated from the rotation in the DCM matrix.  This comparison is made at 10Hz, and then filtered with a weight based on the amount of rotation to estimate the offsets. Normally it would take considerable time at normal in-flight rotation rates for the offset estimate to converge. 

If a DCM matrix reset occurs when the offset nulling algorithm is up and running, the algorithm sees the DCM reset as a instantaneous rotation, however the magnetic field vector did not change at all.  Under certain conditions the algorithm would interpret this as indicating that the offset(s) should be very large.  Since the "rotation" could also have been large the filter weighting would be large and it was possible for a large erroneous estimate of the offset(s) to be made based on this single (bad) data point.

To fix this bug methods were added to the compass object to start and stop the offset nulling algorithm.  Further, when the algorithm is started, it is set up to get fresh samples.  The DCM matrix reset method now calls these new methods to stop the offset nulling before resetting the matrix, and resume after the matrix has been reset.
2012-01-12 14:44:24 -07:00
Andrew Tridgell f93c716126 I2C: convert compass code to new I2C library
this also adds a healthy attribute, and error checking on all I2C
calls
2011-12-28 20:41:53 +11:00
jasonshort 8a0843e69a Added a limit to the atan function to calc the heading. Just trying to avoid, bad values screwing up the DCM. - Jason
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2777 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-08 03:56:04 +00:00
rmackay9@yahoo.com 151aa5d415 AP_Compass - added auto detect of 5843 vs 5883L to AP_Compass_HMC5843 class
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2699 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 16:30:42 +00:00
deweibel@gmail.com a19b5a5c10 Add an alternate compass.calculate() function substituting 1 sqrt func for 4 trig funcs.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2221 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-08 18:15:29 +00:00
jasonshort 0ff00e3a53 added names to output in show
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1698 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-20 03:46:18 +00:00
jasonshort 385e3af27e Added accessors declination.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1677 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-19 03:57:53 +00:00
DrZiplok@gmail.com 1f04ecbfdb Major update including AP_Var support.
Most of the compass functionality is now abstracted in a base class, with the various sub-classes implementing just their unique functionality.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1647 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-14 04:25:20 +00:00