Andrew Tridgell
4aa068d63d
SITL: added simple launch sim for plane
...
allow for bungee, catapult and hand launches
2017-08-29 07:35:04 +10:00
Peter Barker
9783c0c3ba
DataFlash: log dataflash-file statistics periodically
2017-08-28 22:05:44 +01:00
Peter Barker
776d88bb6b
DataFlash: remove duplicate variables
2017-08-28 22:05:44 +01:00
Andrew Tridgell
29fe432dd7
AP_SerialManager: enable debug console use for other protocols
...
this allows SERIAL5_PROTOCOL to be set on FMUv2 and FMUv3 for use by
other protocols
2017-08-28 17:57:28 +10:00
Andrew Tridgell
d09b549144
HAL_PX4: allow uart5 to be used for non-nsh on FMUv2/FMUv3
2017-08-28 17:57:28 +10:00
Andrew Tridgell
0155434057
RC_Channel: fixed bug in manual with TRIM == MIN
...
This fixes the bug described here:
https://discuss.ardupilot.org/t/arduplane-reverse-thrust-setup/18324/5
which otherwise would prevent output with TRIM == MIN or TRIM == MAX
2017-08-26 20:30:54 +10:00
Peter Barker
2f9fb581fe
DataFlash: remove bad FALLTHROUGH causing compilation failure
2017-08-24 15:49:15 +09:00
Peter Barker
921985fe27
GCS_MAVLink: allow statustext logging from any source system
...
Turns out this is terribly useful for companion computers if
you allow them to log things when they're not your GCS.
The original check was bogus; if someone is talking to you via
mavlink they can do much worse than fill your logs!
2017-08-23 15:58:47 +01:00
Jacob Walser
e8f5967682
GCS_MAVLink: Add MSG_NAMED_FLOAT ap_message id
2017-08-23 13:40:52 +01:00
Lucas De Marchi
3414883f05
AP_GPS: remove tabs and fix coding style
2017-08-22 23:59:13 -07:00
Lucas De Marchi
927289aa64
DataFlash: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi
7b0d6166e1
AP_RangeFinder: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi
b37ca322f1
AP_Landing: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi
0e502d89a3
AP_HAL: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi
8389158d76
AP_GPS: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi
7c6f9a004e
AP_Baro: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi
e2e836f676
AP_Airspeed: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi
3102247a85
AP_Common: add FALLTHROUGH define
2017-08-22 23:59:13 -07:00
Randy Mackay
e13f4d0d56
DataFlash: removed unused optFlowEnabled from Log_Write_EKF
2017-08-23 11:19:14 +09:00
Randy Mackay
59ffc3cd65
AP_OpticalFlow: minor order declaration change
...
non-functional change
2017-08-23 11:19:14 +09:00
Randy Mackay
cf24eef359
AP_OpticalFlow: init checks if enabled
2017-08-23 11:19:14 +09:00
Randy Mackay
bc38affcb1
AP_OpticalFlow: px4flow retries init 10 times at startup
...
This resolves an issue in which some px4flow sensors are slow to startup
2017-08-23 11:19:14 +09:00
Randy Mackay
fdb4c7b5ee
AP_OpticalFlow: failure to init leaves enabled unchanged
2017-08-23 11:19:14 +09:00
Randy Mackay
a7afffe14a
AP_OpticalFlow: rename BUS_ID parameter to ADDR
...
This makes the parameter more consistent with RangeFinder
2017-08-23 11:19:14 +09:00
chobits
d6845a911a
AP_AHRS: fix get_relative_position_NE_home calcalation
2017-08-19 10:23:24 +09:00
Lucas De Marchi
66a1e420cb
AP_HAL_Linux: RCInput_SoloLink: better name to first field
...
Checking the time on the tcpdump capture, it matches the first fields
from the data:
$ tshark -n -c 4 -r ~/tmp/solo/rc.pcap
1 0.000000 10.1.1.1 → 10.1.1.10 UDP 68 5005 → 5005 Len=26
2 0.019976 10.1.1.1 → 10.1.1.10 UDP 68 5005 → 5005 Len=26
3 0.040046 10.1.1.1 → 10.1.1.10 UDP 68 5005 → 5005 Len=26
4 0.059961 10.1.1.1 → 10.1.1.10 UDP 68 5005 → 5005 Len=26
From the previous commit (first 2 packets):
5fa8 f441 3414 0500 73d7 dc05 dc05 dc05 db05 e803 e803 e803 f401
73f6 f441 3414 0500 74d7 dc05 dc05 dc05 db05 e803 e803 e803 f401
0x0005143441f45fa8 - 0x0005143441f4f673 = 0x4E14 = 19988 (usec)
Which seems to approximately match for the other packets as well. We are
not using the field since we rather get the time when we receive it, but
at least use a better name.
2017-08-17 12:04:27 -07:00
Lucas De Marchi
373d41fd6e
AP_HAL_Linux: switch aero to RCInput_SoloLink
2017-08-17 12:04:27 -07:00
Lucas De Marchi
79b004cf6a
AP_HAL_Linux: add prototype for handling SoloLink
...
This allows to use a Solo controller to control Linux-based flight
controllers. The protocol has been derived by analyzing a tcpdump
trace: some fields are ignored. Example trace of RC data (obtained
with `tshark -T fields -e data -n -c 5 -r rc.pcap`
unkonwn seq ch1 ch2 ch3 ... ch8
5fa8 f441 3414 0500 73d7 dc05 dc05 dc05 db05 e803 e803 e803 f401
73f6 f441 3414 0500 74d7 dc05 dc05 dc05 db05 e803 e803 e803 f401
dc44 f541 3414 0500 75d7 dc05 dc05 dc05 db05 e803 e803 e803 f401
bc92 f541 3414 0500 76d7 dc05 dc05 dc05 db05 e803 e803 e803 f401
dfe0 f541 3414 0500 77d7 dc05 dc05 dc05 db05 e803 e803 e803 f401
2017-08-17 12:04:27 -07:00
Peter Barker
154b212545
GCS_MAVLink: move serial_control case to base class
2017-08-17 12:42:31 +01:00
Peter Barker
b17c0482fb
GCS_MAVLink: move play_tune and led_control handling to base class
2017-08-17 12:27:10 +01:00
Peter Barker
23d91c93c8
AP_HAL_Linux: correct compilation warning
...
../../../libraries/AP_HAL_Linux/RCInput_RPI.cpp:129:35: warning: ignoring return value of ‘ssize_t read(int, void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
::read(file, &pageInfo, 8);
2017-08-17 11:28:36 +01:00
Randy Mackay
222dd0c9be
AC_WPNav: correct comments
...
all position vectors are offsets from the ekf origin (not from the ahrs home)
2017-08-17 16:05:08 +09:00
Jacob Walser
b8e7d23cc4
AP_Arming: Add bool check_min_max parameter for Copter/Sub RC checks
2017-08-16 11:37:46 -04:00
Peter Barker
2a07a077d9
GCS_MAVLink: use GCS_MAVLINK subclasses to handle set_mode
2017-08-16 11:05:37 +10:00
Peter Barker
48c4e48225
AP_HAL_PX4: send statustext for RC input decoding type
2017-08-15 22:04:00 +01:00
Mateusz Sadowski
eb56a010b3
AP_RangeFinder: TeraRangerI2C: use address from parameter instead of hardcoded
2017-08-15 19:42:10 +01:00
Mateusz Sadowski
0993300506
AP_Rangefinder: rename trone to TeraRangerI2C
2017-08-15 19:27:49 +01:00
Peter Barker
b6076bcb77
GCS_MAVLink: adapt to new rangefinder method name
2017-08-15 19:00:29 +01:00
Peter Barker
30c4ea8123
AP_RangeFinder: stop storing sensor type as a variable
...
And change method name
2017-08-15 18:58:16 +01:00
Peter Barker
c79cbd71af
GCS_MAVLink: use rangefinder backend accessors
2017-08-15 18:31:58 +01:00
Peter Barker
f1d350bbb1
DataFlash: use rangefinder backend accessors
2017-08-15 18:30:45 +01:00
Peter Barker
63440800fc
AP_NavEKF3: use rangefinder backend accessors
2017-08-15 18:30:45 +01:00
Peter Barker
1e83ef3c44
AP_NavEKF2: use rangefinder backend accessors
2017-08-15 18:30:45 +01:00
Peter Barker
e0bea597c0
AP_Proximity: use rangefinder backend accessors
2017-08-15 18:30:45 +01:00
Peter Barker
c0aa10d84b
AP_RangeFinder: move rangefinder backend data accessors to backend
2017-08-15 18:30:45 +01:00
Michael du Breuil
067335f68d
GCS_MAVLink: Handle termination requests from the GCS
2017-08-15 15:14:56 +01:00
Michael du Breuil
97c1785bef
AP_AdvancedFailsafe: Allow the GCS to request terminations
2017-08-15 15:14:56 +01:00
Miguel Arroyo
fc155eac7e
AP_HAL_PX4: Adds UARTF as commandline option
2017-08-15 14:31:51 +01:00
JU Han
eebef857f1
AP_TECS: gain scaler K_STE2Thr multiplies by (THRmax - THRmin)
...
Makes both feed forward and feed-back consistent
2017-08-15 14:27:43 +01:00
Randy Mackay
9f876dc7a0
AR_AttitudeControl: throttle and steering control library
...
Throttle controller has these advantages over existing controller:
based on velocity in vehicle's forward-back axis rather than ground-speed
straight-forward PID controller using speed error as input
speed control acceleration limts
stop control slows vehicle smoothly
configurable filtering
Steer controller has these advantages over existing controller:
output scaled properly for skid-steering vehicles
layered P and PID controller for angular error and rate control
configurable filtering
2017-08-15 20:47:19 +09:00
Peter Barker
7173025b43
AP_Arming: warn about uncalibrated throttle but do not fail check
...
We can tighten this check up later, and will allow us to use
this common function for Plane and Rover in the future
2017-08-14 15:32:25 +09:00
Peter Barker
b2459c67d5
AP_Arming: move Copter RC checking code into library
2017-08-14 15:32:25 +09:00
Peter Barker
e3599ab4f9
AP_Param: remove CLI
2017-08-14 10:23:50 +09:00
Peter Barker
bff31e8b42
GCS_MAVLink: remove CLI
2017-08-14 10:23:50 +09:00
Andrew Tridgell
1a25087dd5
AC_AttitudeControl: fixed PIRO_COMP index
...
this is a new conflict due to stricter checking in AP_Param
2017-08-14 09:28:57 +09:00
Michael du Breuil
58e784024f
AP_HAL_SITL: Add support for blocked pitot tube simulations
2017-08-10 20:15:35 +10:00
Michael du Breuil
4dbe282121
SITL: Add airspeed failure parameters
2017-08-10 20:15:35 +10:00
priseborough
2310cb6d19
AP_NavEKF3: Enable external control over use of GPS vertical velocity
2017-08-10 19:49:45 +10:00
priseborough
f2f3067326
AP_NavEKF2: Add interface to control GPS vertical velocity use
2017-08-10 19:49:45 +10:00
Mark Whitehorn
3642ecd9ef
AP_COMPASS: fix errors in addition of alternate LIS3MDL I2C address
...
testing shows ROTATION_YAW_90 is correct for mRo Neo M8N GPS/compass
2017-08-10 19:46:26 +10:00
Mark Whitehorn
a6e9baa8f6
AP_Compass: probe for LIS3MDL in mRo Neo-M8N GPS module
2017-08-10 19:46:26 +10:00
Peter Barker
1fc82442a0
GCS_MAVLink: remove dummy functions; examples are linked with all libs
2017-08-09 16:18:22 +01:00
Peter Barker
7aaabea4ea
GCS_MAVLink: send gps messages as separate queued messages
2017-08-09 16:18:22 +01:00
Peter Barker
ee5874ab32
GCS_MAVLink: move sending of gps_raw up
2017-08-09 16:18:22 +01:00
Peter Barker
4e3cc6fd27
GCS_MAVLink: move sending of system_time up
2017-08-09 16:18:22 +01:00
Peter Barker
d1a9128118
GCS_MAVLink: move sending of camera_feedback up
2017-08-09 16:18:22 +01:00
Peter Barker
d03c7389f7
GCS_MAVLink: move sending of meminfo up
2017-08-09 16:18:22 +01:00
Michael du Breuil
5fca7d02b3
AdvancedFailsafe: Rework status texts to be more uniform
2017-08-09 15:39:17 +01:00
Peter Barker
127edce39e
AP_RangeFinder: move prearm checks into backend
2017-08-09 13:58:53 +01:00
Peter Barker
0b1c67d170
AP_RangeFinder: remove unused parameters from detect and constructors
2017-08-09 13:58:53 +01:00
Peter Barker
08cd3f4a77
AP_RangeFinder: move instance parameters into instance state
2017-08-09 13:58:53 +01:00
Randy Mackay
f995106c1e
AC_PID: minor formatting change
2017-08-09 18:03:09 +09:00
Peter Barker
a841fddb3e
GCS_MAVLink: rename MSG_RETRY_DEFERRED to MSG_LAST and clarify comments
2017-08-05 23:13:48 +01:00
Peter Barker
0c5f66dc59
GCS_MAVLink: refactor code into new retry_deferred method
2017-08-05 23:11:09 +01:00
Peter Barker
fdac13d3d3
GCS_MAVLink: tidy send_message function
2017-08-05 23:09:37 +01:00
Randy Mackay
164096225b
AP_SteerController: fix get_steering_out_rate bug when reversing
2017-08-05 11:20:58 +09:00
Randy Mackay
638ba02d5f
AP_Mission: add support for Set-Yaw-Speed command
...
This is initially only intended for use by Rover
2017-08-05 11:20:58 +09:00
Randy Mackay
42cab6b533
AP_LandingGear: add startup position selection parameter
2017-08-05 11:20:41 +09:00
Francisco Ferreira
e0f4d3dbe5
AP_HAL: remove unused HAL_AIRSPEED_MS4515DO_I2C_BUS macro
2017-08-05 03:15:53 +01:00
Francisco Ferreira
d3ed4420e6
AP_Airspeed: remove unused MS4525D0_I2C_BUS macro
2017-08-05 03:15:52 +01:00
Vinicius Juvinski
78deddabda
AP_Airspeed: MS4525: Add support to I2C Bus 2
...
BBBMini use I2C Bus number 2 and MS4525 just use up to bus 1, so I
addedd this bus 2 to address struct.
2017-08-05 03:15:32 +01:00
José Roberto de Souza
9ee007f924
AP_HAL_PX4: Map PX4_I2C_BUS_EXPANSION1
2017-08-04 12:47:01 -07:00
José Roberto de Souza
e674d6ee20
AP_HAL_PX4: aeorfc: Move GPS to UART7
...
The UART3 also have the I2C bus 2 functions so moving GPS to UART7 to
have one additional I2C.
To keep GPS working is also necessary update the FPGA RTL to version
0xC1 or higher.
2017-08-04 12:47:01 -07:00
Francisco Ferreira
6cf8791eb5
AP_Compass: correct comment in LIS3MDL driver
...
Commit 17f2393c1b
decreased timer frequency but didn't change comment to match
2017-08-04 19:56:26 +01:00
Lucas De Marchi
5ea1784838
global: remove AP_HAL::in_timerprocess()
...
This is not used and in the only places it would make sense would be
internally to the scheduler so remove it.
2017-08-03 20:25:14 -07:00
Lucas De Marchi
08637f1dcc
AP_HAL_VRBRAIN: Scheduler: replace use of in_timerprocess()
...
This function actually checks if we are not in the main thread rather
than if we are in the timer thread.
Add a new function that does what it's supposed to do.
2017-08-03 20:25:11 -07:00
Lucas De Marchi
1aaba01622
AP_HAL_QURT: Scheduler: replace use of in_timerprocess()
...
This function actually checks if we are not in the main thread rather
than if we are in the timer thread.
Add a new function that does what it's supposed to do.
2017-08-03 20:25:07 -07:00
Lucas De Marchi
9e66938f68
AP_HAL_PX4: Scheduler: replace use of in_timerprocess()
...
This function actually checks if we are not in the main thread rather
than if we are in the timer thread.
Add a new function that does what it's supposed to do.
2017-08-03 20:25:01 -07:00
Lucas De Marchi
93a558ce5c
AP_HAL_Linux: do not call delay callbacks on other threads
...
If a thread other than the main one calls Scheduler::delay() we could
end up triggering the call of delay callbacks. Those should only ever
happen on the main thread.
2017-08-03 20:24:57 -07:00
Peter Barker
ad2c3d27ec
GCS_MAVLink: move try_send_message queued_param_send up
2017-08-03 14:34:33 +01:00
Peter Barker
679bb7f7a5
GCS_MAVLink: move try_send_message send_hwstatus up
2017-08-03 14:33:37 +01:00
Peter Barker
3b472ccc17
GCS_MAVLink: move try_send_message mission handling up
2017-08-03 14:24:47 +01:00
Peter Barker
b8cb758fac
GCS_MAVLink: move try_send_message compass message handling up
2017-08-03 14:24:46 +01:00
Lucas De Marchi
e98fe2d7d5
AP_HAL: RingBuffer: add missing include
2017-08-02 21:10:55 -07:00
Lucas De Marchi
61aed0f0d7
RingBuffer: example: integrate with build system
...
It's only compatible with Linux so for now disable the other boards.
2017-08-02 16:08:55 -07:00
Murilo Belluzzo
641671a366
AP_HAL: Add simple stress test for RingBuffer class
...
It runs a Producer/Consumer thread pair endless reading and writing a
ByteBuffer. Producer writes a number sequence that is twice the
ByteBuffer size so a given position have a different data on each write
pass. Consumer makes sure that this pattern is not broken and aborts the
program if it is.
It is possible to spawn more pairs by informing a number as argument of
the program.
2017-08-02 15:30:35 -07:00
Lucas De Marchi
dbd074b250
AP_HAL: remove register_timer_process with extra arg
2017-08-02 08:00:53 -07:00
Lucas De Marchi
c170c2a847
AP_HAL_Linux: remove register_timer_process with extra arg
...
This is not used anymore.
2017-08-02 08:00:53 -07:00
Lucas De Marchi
6bab28397a
AP_Compass: remove user of timesliced logic
2017-08-02 08:00:53 -07:00
Lucas De Marchi
0a158f6d3f
AP_HAL_Linux: remove support for timesliced timer
...
This has long been replaced by the bus per thread scheme.
2017-08-02 08:00:53 -07:00
ljwang
5a7ec7d429
Delete write registers at start,using another way to repair
2017-08-02 16:15:14 +10:00
ljwang
648871a388
Fixed the QMC5883 identification,add check ID
2017-08-02 16:15:14 +10:00
Peter Barker
b445313bf1
AP_Scheduler: remove loop-period argument from load_average
...
This now comes from a parameter rather than being hard-set
in the vehicle code
Also adds a method returning the max loop period based on the
loop rate
2017-08-01 19:39:27 +01:00
Michael du Breuil
efe70c8d3a
AP_NavEKF3: Fix possible compass nullptr dereference
2017-08-01 15:25:05 +01:00
Michael du Breuil
dffa3d3b40
AP_NavEKF2: Fix possible compass nullptr dereference
2017-08-01 15:25:05 +01:00
Andrew Tridgell
99f5229a34
SRV_Channel: added copy_radio_in_out_mask()
2017-08-01 08:25:32 +10:00
Andrew Tridgell
1f1b4241c3
SRV_Channel: added get/set for reversed and function
...
these are needed in plane for auto-conversion of old elevon code
2017-08-01 08:25:32 +10:00
Andrew Tridgell
75999dbb39
SRV_Channel: prevent negative slew rate
...
thanks to Michael for pointing this out
2017-08-01 08:25:32 +10:00
khancyr
15398f8b0e
AP_Math: correct variable init and remove define in polygon
2017-07-31 17:35:08 +09:00
Randy Mackay
f5f6ec5238
AP_Arming: rename _MIN_VOLT to _VOLT_MIN
...
Also _MIN_VOLT2 to _VOLT2_MIN
2017-07-31 17:19:55 +09:00
Randy Mackay
2f3a57e0aa
AP_Arming: minor variable type change
...
no functional change
2017-07-31 17:19:55 +09:00
Randy Mackay
330a6065ca
AP_Arming: Copter gets MIN_VOLT parameters
2017-07-31 17:19:55 +09:00
Michael du Breuil
2894b7cbea
L1_Control: Ensure that LIM_BANK passes a sea level sanity check
...
This fixes #6637 where the LIM_BANK can be set such that the vehicle demands a radius at sea level that is much higher then the loiter radius was configured to be. This effectively feels like a fly away and is due to bad parameters usually. If this happens just fall back to the simple EAS2TAS scaling of the radius.
2017-07-30 12:42:21 -07:00
Peter Barker
975d2fd0d1
DataFlash: add debug for io thread failure
2017-07-28 17:06:49 +01:00
Peter Barker
b4688bd3d4
GCS_MAVLink: move common mavlink camera handling up
2017-07-28 14:32:58 +01:00
Peter Barker
bb06b02df6
AP_Camera: add const to some parameters
2017-07-28 14:32:58 +01:00
Peter Barker
a94bf851eb
AP_Camera: use multiplication in place of division
2017-07-28 14:27:53 +01:00
Peter Barker
9390539231
AP_Camera: tidy up usage of trigger_pic
2017-07-28 14:27:53 +01:00
Peter Barker
84ef63edc7
AP_Camera: camera is responsible for taking distance-based-images and logging
2017-07-28 14:27:53 +01:00
Peter Barker
7f59279670
AP_GPS: make time_epoch_usec const
2017-07-28 14:27:53 +01:00
priseborough
db7c8439c6
AP_NavEKF3: Fix bug in wheel odometry timestamp correction
2017-07-28 12:48:38 +09:00
Matt
5b605d6e1c
AP_Notify: Fix for Oreo LED gyro init inidication
...
If parameter INS_GYRO_CAL is disabled, usually because operator is
arming on a moving vehicle such as a boat, the Oreo LEDs would wait
indefinitely for a gyro calibration that will never happen. This
removes that dependency. The LEDs will strobe blue only when gyros are
actually initializing. Not before. Consequently, this greatly
simiplifies that portion of the code.
2017-07-27 20:43:58 +09:00
khancyr
f583121433
AC_Fence: reset fences breach on disable
...
Also rename enable function parameter
2017-07-27 20:41:40 +09:00
Peter Barker
e7ff5107fb
AP_GPS: tidy mavlink message handling using switch statement
2017-07-27 12:03:25 +01:00
Peter Barker
2ad453fc89
AP_GPS: handle inject packets as part of handle_msg
2017-07-27 12:03:25 +01:00
Peter Barker
60ffe00164
GCS_MAVLink: move gps inject handling up
...
Also, make AP_GPS responsible for decoding inject packets
2017-07-27 12:03:25 +01:00
priseborough
c7f6d52065
AP_NavEKF3: Add wheel encoder odometry
...
Uses the existing body frame odometry observation model.
Handles each sensored wheel as a separate sensor.
2017-07-27 16:52:27 +09:00
priseborough
cbe8f97489
AP_NavEKF3: rename struct used for velocity odometry observations
...
Do this so we can add other odometry observation types.
2017-07-27 16:52:26 +09:00
priseborough
08a3f55c90
AP_NavEKF3: Fix error in scaling of observation error
2017-07-27 16:52:25 +09:00
priseborough
593437ca95
AP_NavEKF3: Add tuning of visual odometry observation error
...
Also adjust default values based on replay analysis.
2017-07-27 16:52:25 +09:00
Randy Mackay
eaf8aad5ad
AP_WheelEncoder: last_reading is last update time instead of system time
2017-07-27 14:19:08 +09:00
Randy Mackay
2c7b9d9cf7
AP_WheelEncoder: add get_delta_angle
...
The total angular change measured by the wheel encoder in radians
2017-07-27 14:19:08 +09:00
Randy Mackay
a53e254bd0
AP_WheelEncoder: replace scaling with CPR and radius
...
CPR is the wheel encoder's counts per revolution of the wheel
radius is the radius of the wheel in meters
2017-07-27 14:19:08 +09:00
Randy Mackay
cd71984705
AP_WheelEncoder: 3d position offset
2017-07-27 14:19:08 +09:00
Randy Mackay
1ddf38869a
AP_AHRS: set AP_Notify gps_glitching flag
2017-07-27 14:16:23 +09:00
Randy Mackay
0d5c98ad45
AP_Notify: add gps glitch notification
2017-07-27 14:16:23 +09:00
Randy Mackay
9123b6034e
SRV_Channel: update_aux_servo_function first checks function is valid
...
This resolves a bug in which the board could become unresponsive if an invalid function is selected
2017-07-27 11:09:57 +09:00
Patrick José Pereira
1eeea82e31
AP_Parachute: Add function to return _release_in_progress status
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2017-07-26 17:51:34 +01:00
Randy Mackay
572df8b859
SRV_Channel: minor formatting fixes
...
no functional change
2017-07-26 13:28:07 +09:00
Randy Mackay
298eaaeb3e
SRV_Channels: rename SERVO_DEF_RATE to SERVO_RATE
2017-07-26 13:28:07 +09:00
Randy Mackay
687ec98e5d
AP_HAL_PX4: set default servo update rate only when changed
...
This removes the chance a small switch occurring whenever this function is called
2017-07-26 13:28:07 +09:00
Peter Barker
85a0da6178
GCS_MAVLink: handle common GPS messages in base GCS_MAVLINK class
2017-07-25 14:00:45 +01:00
Randy Mackay
a657daf635
Compass: disable QMC5883 compass driver by default
...
This driver causes occasional heading issues so disabling until these are resolved
2017-07-25 09:27:29 +09:00
khancyr
2d0bce18a8
AP_Baro: rename all local variable with prefix
...
fix last missing spaces
2017-07-24 10:15:15 -07:00
khancyr
35ac86ff8d
AP_Baro: fix some style and const correctness
2017-07-24 10:15:15 -07:00
khancyr
0e895f5c74
AP_Baro: fix instance shadowing
2017-07-24 10:15:15 -07:00
khancyr
42516f7079
DataFlash: simplify Log_Write_Proximity
2017-07-24 13:44:43 +01:00
khancyr
8abcb7a0e3
GCS_MAVLink: simplify send_proximity
2017-07-24 13:44:43 +01:00
khancyr
603621f2c4
DataFlash: move proximity log from Copter (NFC)
2017-07-24 13:44:43 +01:00
khancyr
ec2ea1c903
GCS_MAVLink: move send_proximity to GCS common code (NFC)
...
Also clean two comments
2017-07-24 13:44:43 +01:00